I have a user who is using Photoshop CS4 on a Dell Optiplex 745, with onboard Intel video. Since I read that Photoshop now uses OpenGL heavily in its operations, and also understanding that OpenGL support is pretty bad on Intels integrated video, we put an Nvidia GeForce8400 card in the PCIExpress slot, and loaded the latest drivers from Nvidia (version 182.50 currently). The user reports he periodically gets the attached error message, "Photoshop has encountered a problem with the display driver and has temporarily disabled GPU enhancements. Check the video card manufacturers website for the latest software"... Knowing that some other OpenGL-enabled software is picky about what version of Nvidia graphics drivers are installed, I wonder if this is what we're seeing here...
I just installed Photoshop CC v14.1.2 x64 on a box and it grumbles at me when I launch the program. It says "Photoshop detected an error in your display driver. Update or reinstall the driver and check Use Graphics Processor to retry."
Checking the graphics driver it is indeed up to date.
Setup: Win7 Pro 64 bit Video cards: mv video hook driver2 (disabled) Nvidia Quadro K4000, v9.18.13.2902
The graphics options in Photoshop are simply greyed out.
i have had this error for since over a couple of months and i have been udated my graphics card to the latest beta versions.this is what my graphics process settings show URL....
So I have 64-bit Windows 8, 64-bit Photoshop CS6 and an ATI Radeon HD 4770 GPU. When I go to the settings in PS, it tells me that there is a problem with my display driver so I cannot use GPU graphics processing. I would really like these features to be available to me, especially since my GPU meets the recommendations by Adobe. I installed the latest driver from AMD.
I've got a Lenovo Thinkpad R500 running Windows Vista.
I seem to be having an issue with my display driver. Everytime I open Adobe Photoshop, I get an error that photoshop has encountered an error with my display driver, and it does not display images properly (they seem to be very low resolution).
I checked my drivers, and everything is up to date. I even ran Windows Update just to be sure.
I recently upgraded my laptop to Windows 8.1 and now from time to time, I am receiving the error above on the right side of the screen and my photoshop files won't open. Instead it just freezes and becomes unresponsive so I have to close Photoshop from going to 'End Task'. I am using CS6.
when I start photoshop, I get a message saying: "Photoshop has encountered a problem with the display driver and has temporarily disabled GPU enhancements. Check the video card manufacturer's website for the latest software. GPU enhancements can be enabled in the Performance panel of Preferences."
I have the latest graphics drivers installed, but this message does not always occur when I start Photoshop although the driver does not change. So, I guess there might be some other reason causing this error message.
I am running Photoshop on a Thinkpad with Windows XP Professional.
I am receiveing this message every time I open Photoshop. What dose this mean?
Photoshop has encountered a problem with the display driver, and has temporarily disabled GPU enhancments. Check the video card manufacturer's website for the latest software.
GPU enhancments can be enabled in the Performance panel of Preferences.
error message:"Display driver stopped responding and has recovered" Display driver Intel Graphics Accelerator Drivers for Windows 7(R) stopped responding and has successfully recovered.
This happens when I copy and paste a group of blocks. The screen goes black for 2-3 seocnds then finally recovers.
This only happens when PS CS6 (x64) is opened (fresh). If I create a blank doc, I get a top left "blank" rectangle. If I start up CS6 and select a file to open, I get the same blank square. After this, if I open or create a new doc, the files look fine. If I zoom into the blank space, it will eventually draw in properly. This is on any file I open. The files are intact.This is on Win 7 x64, Updated CS6 x64.
Currently using Photoshop CS6 Extended on Windows XP. When I go to enable UGP in Preferences the message I get is "photoshop detected an error in your display driver. Update or reinstall the driver and check UGP to retry". Have reinstalled Photoshop but the problem is still there. Photoshop Extended is compatiable with Windows XP so why can't I enable the display driver?
Due to some issues, I was told by HP support to update my display driver. I now have AMD Radeon HD 7950 but since installing this, Photoshop CS5 Extended and 64-bit keep crashing. I'm given the error:
Photoshop CS5 has stopped working
Photoshop has encountered a problem with the display driver, and has temporarily disabled GPU Enhancements. Check the video card manufacturer's website for the latest software.
GPU enhancements can be enabled in the Performance panel of preferences?
We just installed the Autodesk Package. AutoCAD works fine, Revit seems to work, but we are having the display drive not responding, when we try to start a sketch in Revit.
ATI Radeon HD 3740 graphics card. Windows 7 - 32 bit
direc3d 9 resets to defaults. annoying, everytime i start max- have to set to my prefferences (anisotroping and texture sizes)
direct3d 10 "display all triangle edges" on/off makes no effect, i still see all triangles, that confuses "use cashed drdx meshes" removes those triangles but they appear entering polygon editing on some files those two checkboxes seems to have no effect at all, i see lots of triangles i dont want or need to see
mobile ati radeon 5650 latest drivers, 8gb ram, intel i5 cpu (swithcable graphics, yes, i work with ati graphics card! not intel max 2011 64bit design SP2 win 7 64bit
I've been working with a firm for 6 weeks now, and had no major AutoCAD problems for the first 5 weeks. We're running AutoCAD 2010 on my machine, and it crashes quite often when I close drawings, which is quite annoying. But last week after opening a series of drawings to print some stuff for the boss, and CAD crashing after every 1 or 2 prints, I got the message:
A display driver file (.hdi) is missing or has been corrupted. The program will be closed.
This problem may be caused by missing .hdi files in the following location:
C:program filesAutoCAD Architecture 2012drv
I ran a repair, then did a reinstall, and when neither of those worked I just uninstalled and reinstalled the whole program. I still got the error message, but I had opened AutoCAD Architecture and was using that instead for a bit and saw Autodesk do an update in the background. So I booted up AutoCAD 2010 and it was working again so I guess it fixed the problem. I used it for a few more days then yesterday I had to open and print another series of drawings for the boss and it crashed again after every one, as usual, and when I sat back down and tried to open up a drawing to work on it I got the same error message again. Frustrated and angry, I switched over to AutoCAD Architecture and imported my Classic setting and used that for the next day. But this morning I had to open and print 3 more drawings for the boss and Architecture crashed after every one, then it started giving me the same error that regular AutoCAD has been giving me about the missing .hdi file. I copied the drv folder from a co-worker's computer and replaced mine with the working one, but neither version of AutoCAD is working again.
So I ask, what do I do now? I can't keep uninstalling and reinstalling AutoCAD every week because of these crashes and missing .hdi files. I need a real fix, something to fix the constant crashes and missing files. Sometimes I have to open multiple drawings to pull blocks or whatever from an older drawing, and I can't risk CAD crashing after I close these drawings and me possibly losing some work on the file I am actually working on at the time. this is making me way less productive at work spending all this time trying to get AutoCAD to work.
I have a brand new HP Probook 4530s with the correct requirements to run LT 2012 as well as a certified and tested graphics card and latest drivers, but as soon as I try using offset or trim functions while drawing, my screen goes blank for about 4 seconds and an error message below tells me my Display Driver has stopped working and has recovered.
No matter the screen resolution settings, it still does the same, also the laptop is still cool, so can't be a heat issue.
I've recently installed ACad13 and it shuts down on me at least once, sometimes twice a day - A message appears that says "Display driver fail to display". I have also installed 13 onto a brand new computer using Windows 7 (64 bit). Or is it a problem relating to the new pc - everything else seems to work ok on the computer
I've got AutoCAD LT 2010 and I can't run it due to either a DLL missing or a Display driver file not found. Anyway I get an error message window pop up then when I click ok there is a second window that appears and then it shuts down. I've tried both a repair and a reinstall but the issue keeps happening.
These are the messages I got;
1st window - DLL not found: C:Documents and SettingsShane.RichardMy Documentsgdi10Res.dll 2nd window - A display driver file (.hdi) is missing or has been corrupted. The problem may be caused by missing .hdi files in C:Program FilesAutoCAD LT 2010Drv
I was using CS5.1 for a while with no problems. Everything went well until one day it gave me an error on hardware acceleration. All it did was give me a scrubby zoom. I spent a few days researching it and eventually gave up on finding a solution.
So I thought I'd try out CS6, to see if it fixed anything. It doesn't. It's worse, even. It crashes randomly at various actions (like switching tools, changing layers, saving), and it crashes without fail if I use liquefy or transform a layer and then try to duplicate it (I'm just trying to make a gif, darnit!) If I'm just drawing and erasing and using undo, it doesn't crash as much. Scrubby zoom is still a problem.
My driver is up to date according to the HP website:Intel High-Definition (HD) Graphics Driver2010-12-03 , Version:8.15.10.2189, 78.05MIt's really old, but HP isn't updating it. I've tried uninstalling it and reinstalling it. Moot point.The driver is compatible with OpenGL.
I also tried this driver, but apparently it's not compatible.
Additional info/things I've tried: Processor: Intel Core i5 CPU M 450 @ 2.40GHZ 2.40 GHzRAM: 4GBSystem type: 64-bit No third-party plug-ins. 60% memory available to Photoshop. Photoshop is updated to the latest version.Windows is updated (I spent a freggin day trying to figure that out because updates were frozen, and then spent 3 hours trying to figure out why F8 wouldn't bring up advanced boot options so I can delete old update logs so I can update windows so I can get photoshop working--TO NO AVAIL) GPU support option is greyed out, so it's already turned off.
When it crashes, all Windows says is "Adobe Photoshop CS6 has stopped working". Then the details afterwards note "files that describe the problem", which include...
The C:UsersBaniAppDataLocalTempWER7781.tmp.WERInternalMetadata.xml file, which states:
-<WERReportMetadata>-<OSVersionInformation><WindowsNTVersion>6.1<Build>7601 Service Pack 1<Product>(0x1): Windows 7 Ultimate<Edition>Ultimate<BuildString>7601.18113.amd64fre.win7sp1_gdr.130318-1533<Revision>1130<Flavor>Multiprocessor Free<Architecture>X64<LCID>1033</LCID> -<ParentProcessInformation>
[Code]......
The C:UsersBaniAppDataLocalTempWER9D1B.tp.appcompat.txt is on pastebin here: [URL]
So I looked up other issues regarding "aticfx64.dll", and nothing works. My last options are either to downgrade again, or to upgrade my video card, but I don't know what kind of video card I need.
I'm only a few seconds in to my video and a few clips in... and when I play it back I get weird audio feedback like a repetitive noise that appears to be an artifact of decompression. I tried to produce an output to see if it shows up there as well (as opposed to my project view playback) and near the end of processing the short clip, I get an error message:
I wanted to connect my Euphonix Color Board to Smoke, but in the beginning I get an error message saying that the EuCon Driver is incompatible.So which version is compatible? I'm running Smoke for Mac 2012 SP1, on Mac OS X 10.6.7
Smoke 2012 SAP2 SP4 and Smoke 2013 SP2 (Smoke Classic Keyboard Shortcuts) Mac Pro 4,1 OS X 10.6.7 12 GB RAM NVIDIA Quadro 4000 14 TB RAID (Areca)
Trying to print from LR 5.3 RC using .icc profile in printer settings in Epson Pro 3800 driver the Color Settings and Color drop downs are disabled???? In other applications these options are enabled and selectable.
I'm using the german version of Photoshop CS 6. For that reason I don't know how the functions are exactly called in the english Version
I've installed Photoshop CS 6 on my notebook. And I got display errors each time if I use selections or want to rotate the view of an image and things like that.
I already found out that it is a problem with my graphics adapter (ATI 6850M ). I tried the same on my other notebook which uses Intel Grapics HD 4000 which works perfectly, but using that notebook isn't a option.
In PS CS3, attempting to save an ASE file with a swatch selection that contains an illegal color (e.g., an HSB or PANTONE color) results in an error message. You must delete the offending color to save the swatch exchange file.
CS6 implies that the color's simply omitted from the ASE file. Is that true, or does the save process fail the way it does in CS3?
I keep getting the error message "For the Photoshop UI to display correctly, open System Preferences, click Appearance, and turn off text smoothing for font sizes 8 and smaller." I go into preferences and into general but there is no setting to turn off text smoothing for a specific font. I'm in osx mavericks and all it says is "use lsd font smoothing when available" and when I uncheck it, the error message in photoshop still pops up.
I get a display error during the execution of some of the commands used in AutocadLT with Windows 7. It occurs when I choose a command along the bottom of the display area just above the command window (offset seems to be the worst offender. As soon as I choose the command, the computer locks up for a second or two then the screen goes black. Most of the time it will come back with a white screen in the rawing area and I will have to use the regen command to continue editing. it will sometimes do this numerous times before I can complete the command. (offset).
The error displayed from the task bar is:
Display Driver stopped responding and has recovered Display driver Intel Graphics Accelerator Drivers for Windows 7(R) stopped responding adn has successfully recovered.
I cannot seem to get the Help menu item to work at all. Every time I select Help -> Help Topics... I get a dialog box with the following error message: Web Works Help display fail! I've reinstalled PSP twice. And I downloaded the latest update.
When opening the layers dialogue box in AutoCAD 2013 the display does not appear to load correctly, I have had this problem before when executing this command and loaded up the old layer manager, I can't remember what the command is for load this.
Autodesk Inventor Professional 2013 SP2 64-Bit Edition Windows 7 HP Z400, Intel Xeon W3550 3.07GHz 12.0GB RAM, ATI FirePro V4800 (FireGL)
In LR5, when two images are selected in Library view, the results in the Keyword Tags panel are incomplete. In my instance, two images were selected. They have some common keywords and those are properly displayed. However, the keywords assigned to only one image appeared with an asterisk in previous versions of LR, a behavior I would like to see continue.
In my instance, one keyword for, we'll say, Image A only, appears but with no asterisk, it should display an asterisk. And, one keyword unique to Image B does not appear at all when both images have been selected, it too should appear with an asterisk.
