VideoStudio :: Unable To Edit Anything Without Audio Skipping Pro X3
Jul 25, 2011
have been looking at various posts regarding audio skipping but am clueless as to how to repair or use this program successfully. I am able to import a simple mp2 file off a DVD (VOB), scan into scenes and usually play it in the timeline without skipping. I can play an mpg clip/scene, at least once, without skipping. Any kind of editing of any file results in skipping. Whether I save as a project or not, it skips. If I export, it skips. With or without Smart Proxy, it skips. With or without SP2 (after a clean reinstall) it skips. I have been editing for at least 7 years with various programs, but this is truly a first. I am really hesitant to upgrade to X4 as a fix, fully expecting it will be more of the same.
I want to clarify something. I listened very closely with a friend and concluded it is not exactly skipping. It is truncated repeating of a word in close succession, so you will hear a word immediately followed by the same word repeated but partly cut off.
View 5 Replies
ADVERTISEMENT
Jan 15, 2012
Used audacity to convert an mp3 selection to wav for use in my PRO 2X project and it plays perfectly as an audio clip. However, when I switch to "project" mode, it skips in several places. I've tried deleting it and starting over, but no luck.
Could I have messed something up during the audacity process? I've done it before and haven't had problems. I REALLY want to use this piece of music in my project.
View 9 Replies
View Related
Jan 30, 2014
I have been using smoke for about 2 weeks now and I keep having audio glitching and skipping on my timeline as well as when I try to export my project to proresHQ. I am working with proresHQ media and a mp3 music track. Sometimes I can restart smoke and it will go away for a while but it always seems to come back and at random places and always shows up when I export. I am unable to export any projects do to this
System
smac2013ext1
osx 10.8.5
32GB RAM
nvidia quadroFX4800
nvidia Geforce 8800 GT 512MB
onboard sound used
AJA KONA 3G(Installed but not used in Smoke2013, no monitors hooked up)
Internal 6TB RAID0
View 9 Replies
View Related
Apr 3, 2013
I used to work in MediaStudio Pro which I really like it because it is very user friendly, then suddenly Corel killed them all by buying them, and never continue that wonderful program.How to edit the audio on the timeline? What I mean is, in MediaStudio Pro, from the Audio in Timeline, I can raise the audio up, then few minutes, low it down, then few seconds later, raise up again etc...From what I see right now on X6, for audio I can only either use the Audio filter to low down or to raise up the whole clip but not, raise up or low down at at any part that I want to.
View 3 Replies
View Related
Feb 1, 2011
I've just made my first attempt of transferring my camcorder tapes to DVD using the video studio pro 3, all seemed to be going well until I tried playing them in my DVD player, you can watch the DVD but there's no sound however, if I play the DVD in my laptop it plays as it should (sound and vision).
View 4 Replies
View Related
Apr 10, 2012
[URL]
What I'm doing is trying to CUT some XVID video and save them with their original format via the following steps:
Share > Create Video File > Same as First Video Clip. The progress will go through to 90%, then I will get the error message:
Unable to compress the audio [17103:10:5]
Decompress the original won't be a choice when hundreds tasks are out there.
The detail infomation about the video I'm working on, hope it will provide more details.
xxx.avi
General
Complete name : xxx.avi
Format : AVI
[Code]....
View 2 Replies
View Related
Oct 18, 2012
Since there's no built-in VS5 provision for audio editing (specifically a sound equalizer), what's the easiest way to edit the audio portion of the video? Sony Movie Studio 12 Platinum has built-in Sound Force and the capability of using Audacity as a plug-in.
I have at least 100 3-4 minute clips that require audio EQ.
View 12 Replies
View Related
Oct 21, 2010
I am running Windows XP, and using Videostudio 11. I know I used to have the DIsable Audio Preview button available when capturing. I have not used the software in about a year and now the button is not available for me to turn off from the capture screen. How can i turn that off? I find that during capture i get less a chance of dropped frames if i turn off the Audio Preview.
View 1 Replies
View Related
Aug 28, 2012
I'm using Video Studio Pro X4. I'm just trying to make a simple, first movie and failing. I have a Sony HD Handycam that produces .m2ts files. I just want to be able to create HD movies that I can play on generic software on my tv. So I assumed I could create an MPG file and play it using Windows Media Player 11. After rendering an MPG file, I get no audio output.
- I imported the .m2ts files into VS
- Put two short clips in the timesline.
- Basic transition.
- Share -> Create Video File -> HDV (tried all options)
- I create the MPG file and I get no sound on playback using Media Player
I would think this is the most basic thing I could possibly be doing and it doesn't work. I am using an underpowered XP laptop, but I would think that would just be a speed issue. I'll get a better desktop for editing, but if I can't perform the most basic of tasks now I'm thinking it's a software issue.
View 6 Replies
View Related
Oct 15, 2012
I have a brand new machine with Iintel i7 windows 7 and 8mg ram, just bought VSX5 pro ultimate.
When I try to import "insert" audio file (mp3) I get back an error "file format mismatch" and so I am unable to insert it to the movie.
View 1 Replies
View Related
Nov 10, 2011
I'm only a few seconds in to my video and a few clips in... and when I play it back I get weird audio feedback like a repetitive noise that appears to be an artifact of decompression. I tried to produce an output to see if it shows up there as well (as opposed to my project view playback) and near the end of processing the short clip, I get an error message:
"Unable to access the audio codec driver"
View 9 Replies
View Related
Oct 13, 2013
I cannot press space bar to play my video anymore while in editing. It shows on the screen the play button is pressed but nothing actually playes. And when I press the space bar again it shows it being paused. When I try to edit a segment. It also skips to the very end everytime I do this. I dont know why. Ive re-downloaded this once already and everything worked fine for about a day then it started doing the same thing again. I have tried looking up solutions and I cannot find anything about this matter.
How can I stop this skipping to the end? I cant even play my video. ONLY if I have something selected will it play. it will not play for example a text track and a video track together. It HAS to be selected in order to play.
It also will NOT let me save the video's anymore also? as in creating a video file.
View 4 Replies
View Related
May 3, 2012
I'm running VS11+ with all three patches/updates. I just made a beautiful Bluray HDV project with m2t files. However, I've noticed when making a DVD with SD clips, VS plays the first title, it skips the second title and goes to halfway in to the third as if nothing was wrong. The preview shows and plays the clips properly. It's only when making the final folders/image that it goofs. It doesn't matter what mpg I put into the second slot. It's always skipped. I've removed the second clip and saved then re-imported. It's always the same. I didn't see anything on a search about skipping titles. I'm fairly amazed it didn't work with SD. I've even popped them in 2 other authoring programs and they all work fine....just not VS11+.
View 2 Replies
View Related
Dec 12, 2010
Since my main menu include only one movie, is it possible to skip the main menu, so the submenu with the selected chapters will become the only one menu?
View 6 Replies
View Related
Mar 11, 2013
After creating a DVD or HD Blu-ray disc to watch on my HD TV the video skips after every transition effect while watching the DVD or HD Blu-ray disc on my tv's and computers. The videos do not skip when I upload them to the internet.
I'm using external USB 2 hdd and USB 3hdd
VS ProX5 and VS12
The properties for my video:
File format: mpeg2
file size-1,173.668
duration-478.378 sec
[Code].....
View 5 Replies
View Related
Sep 22, 2012
I bought VideoStudio x5 about 3 weeks ago, there has been a bit of a learning curve but I am starting to get what I want. I still cant figure out one problem. I am screen capturing with another program because well videostudios screen capture doesn't work that well. My program produces AVI's and I bring them into video studio and piece them together. When I piece videos together, it skips for some reason a second or 2 into the second track. I have tried converting to mp4, hdv 720p - 30p (for PC), AVCHD (1820x720 60P), "Same as first video clip" and they all do the same thing. Here I have a youtube link to a video that I converted from AVI to mpeg and you can hear when I say "Naming Conventions" there is no problem [URL]
Here I have a youtube link to a video that I combined 2 seconds from a previous clip and when I say "Naming Conventions" you can hear the problem. [URL]
View 14 Replies
View Related
Mar 17, 2012
I'm a relative noob on Corel (I have Pro X4) and video editing in general. My primary concern is the video (avi file) is jumping when I drag portions of it into the timeline. It plays fine in the library, but when I drag it into the timeline the clip will jump/skip/jerk. Is there a way to correct this? Do I have to alter some settings? I have a decent (not amazing) Toshiba L650 4GB RAM laptop that is relatively new. Surely seeing as I'm only just adding the first clips in (there is already a 10 minute sound track in place) it shouldn't be jumping already should it?
My only other question for now is is the overlay track virtually the same as the video track? I prefer using the overlay track as I can drop videos anywhere on the video as opposed to it defaulting to the start. All I do is drag the corners out to make it the same size as what it would have been in the video track.
View 14 Replies
View Related
Oct 16, 2011
I have VideoStudio XS4 Pro and it freezes when I try to edit a MPG4 video. The source video is from the Flip video player. I have been able to edit these without any problems before. This time when I put the video in the edit window I can start to play it, but then the UI stops working. It beeps when I try to press any button.
I'm using Windows 7. (see my machine profile) I have applied latest updates.
Project properties:
NTSC drop frame (29.97 fps)
MPEG files
24 bits, 720 x 480, 29.97 fps
Upper Field First
(DVD-NTSC), 16:9
Video data rate: Variable (Max. 8000 kbps)
LPCM Audio, 48000 Hz, Stereo
At this point the software is unusable.
View 5 Replies
View Related
Jul 10, 2011
I have recently upgraded my old VideoStudio 12.00 to VideoStudio Pro X4 and have only just started using the program again after a couple of years of absence so I am still on a learning curve.
Can I extract the audio from a video clip and if so how and how can I convert it, if necessary into an Audio Interchange File Format, so that I can export it to a program such as Audacity for removing background wind noise before importing the Audio back into the videoStudio project.
I have tried using all the audio filter functions in VS to remove the background noise, to no avail.
View 6 Replies
View Related
Apr 2, 2012
I was trying to play around with the software to get to know it, and... well, I think I made something weird in it. Everything was flowing nicely when I was following the tutorial about Editing Objects: I created a box, I selected that edit poly option from the modify tab and I could edit vertices totally nicely.
But then, I really don't know what happened, but, I don't know exactly when, I suddenly could not move the vertices AT ALL. They are pretty visible, but when I select them, they turn red and the axis are not editable! I'm so confused! I can edit the axis very normally if I'm using an option like Select and Move but... With the edit poly thing I just cannot! I tried everything I thought of: Made a new box, restarted the program, restarted the PC! But NOTHING worked.
EDIT: It took me almost an hour to figure out I wasn’t selecting the Select and Move tool!
View 3 Replies
View Related
Feb 28, 2014
I'm having trouble figuring out how to edit multiple audio tracks. I put the clip on the timeline and I can hear both tracks but there is only one audio track showing. How do I seperate the tracks?
One track is from a rhodes external mic with phantom power using XLR. The other is from a powered lavalier mic attached by XLR. Is there something I have to do in project set up?
View 5 Replies
View Related
Jan 18, 2014
Unable to start audio playback. Please confirm your audio device is properly configured or change the driver selection in Preferences: Audio Hardware. On After effects CC
Im on a mac with mavricks OS and i have done what it says and changed it but it go's back to the setting that it was on the one that does not work.
View 1 Replies
View Related
Mar 6, 2013
I have installed After Effects CS6 in a Mac running 10.6.8(Snow Leopard) with 4 GB ram and have installed all the updates of After Effects. Whenever I try to get the audio output, i get an error: " After Effects Warning: Unable to start audio playback. confirm your audio hardware is properly configured or change the driver selection in Preferences: Audio Hardware "
I tried to reinstall the software and also I tried the Audio MIDI Setup configuration but it too is of no use.
View 13 Replies
View Related
Nov 5, 2011
I have on .avi video file from friend, that I can play OK with sound in VLan player, I just installed X3 and tried to make DVD from it and got it without sound, same thing if I play this loaded .avi in X3, don't have any sound ? Is there any secret encoding I have to look for ? Somebody told me that X3 will eat any format.
I"m running W7 with trial X3?
View 3 Replies
View Related
Dec 10, 2010
I am having a problem with way slow audio in Ulead Videostudio 11.5 plus. I know it's an older version, but the format is similar or the same for some of the programs and maybe someone else has had that issue on even a new software version.
I managed to make some music videos with the software, after going to Youtube, as the manual for the software really isn't that great in all honesty. it simply doesn't tell you much detail on doing things. Putting in a music track to the video clips and then turning the sound on each clip all the way down wasn't a problem, but now that I want to do a normal video-I'm finding the sound in the virtual clip or whatever(which I recorded into my digital camera-mov. files), plays like Jabba the Hut off Starwars!
What do I do here to make it sound normal and be able to edit properly and share it in normal sound?I tried splitting the audio and then it sounded normal, BUT it still had that nasty slow sound on the audio. No matter if you mute it or pull the sound down in the video/audio clips in editing. How do I get rid of that slow sound or change it to make it right? Do I even need to split audio there?
View 2 Replies
View Related
Dec 13, 2010
So I go to edit some video and now all of a sudden there is no sound/audio playback in any of my clips. The files are fine. They play fine in other software, and in other editing software as well. But this is the my software of preference and I can't use it. WHAT THE HELL HAPPENED. The same thing has also happened to my DVD Workshop 2 software. And the same thing happened to at least 3 previous versions of VideoStudio. Everything works great and then one day BAM, no audio. The data is there because if I go ahead and render it again and play the new file on something else the audio is still there. So the problem is only on Corel/Ulead products. As a matter of fact I just downloaded the VS X3 demo. I cannot find anything about it online anywhere. If I cannot figure this out I am NEVER going to buy another Corel/Ulead product again. And I am a longtime user, way back to version 3 or 4. And for some idiotic reason I keep buying the new versions.
View 1 Replies
View Related
Jun 3, 2012
No Audio when capturing in VSX5. Also After I install the application any ac3 file or movie with ac3 audio will not play the audio.
View 8 Replies
View Related
Dec 16, 2010
Slideshow Creation: I'd like to make a slideshow DVD for Xmas to give out. I've made a lot of movies with VS but never a slide show and in fact i've never created a slideshow in any program.
Is this possible in VS10 or would it be better to use DVDLab Pro for this? If VS10 is sufficient to do this (just a fairly basic slideshow NOT HD). I really can't grasp it from the Manual since it really isn't covered in detail there (or did i miss it?) I'm looking to see what types of photos/graphics files and what resolution as well as a HOW TO. I'm clueless about slideshow creation.
Audio DVD Creation:
I do seem to recall that i did this once in VS10 - or was this a dream? Is there any tutorial on this as well?
View 4 Replies
View Related
Jun 8, 2011
When using the audio fade in and out to activate the fade should the bars be highlighted or dimmed? I don't seem to hear any difference between them. (Vid pro x4)
View 2 Replies
View Related
Jul 17, 2012
I got a new camera that outputs .avi files, and put together a video. When I click an individual clip in the timeline and play it, the audio plays... however, when I play the project, the audio does not play. It also does not play when I render it.
View 6 Replies
View Related
Apr 13, 2013
Moved Videostudio X4 from a Win 7 machine to a new Win 8 PC.
Again it seems, audio plays fine when playing a clip from the preview window but not when playing on the timeline. (I had a similar problem with X10 and reported it in an older thread.)
Am searching now for more patches (and yes, I'm aware X6 is now the current version) but nothing obvious at the moment. Have found the SP 1/2/3 downloads on Corel's pages, but as it already upgraded to SP3 just after install, I'm guessing SP 1 and 2 are already covered..
View 1 Replies
View Related
