I am running Windows XP, and using Videostudio 11. I know I used to have the DIsable Audio Preview button available when capturing. I have not used the software in about a year and now the button is not available for me to turn off from the capture screen. How can i turn that off? I find that during capture i get less a chance of dropped frames if i turn off the Audio Preview.
View 1 RepliesCan not preview audio of any kind. Audio works AFTER rendering, but not in VS11.5. HAve uninstalled and reinstalled software to no avail. I assume a codec issue, but don't want to install the wrong codec pack.
Ulead Videostudio Version: 11.5.0157.1 Plus
Op System: Windows Vista Premium Home
I've just made my first attempt of transferring my camcorder tapes to DVD using the video studio pro 3, all seemed to be going well until I tried playing them in my DVD player, you can watch the DVD but there's no sound however, if I play the DVD in my laptop it plays as it should (sound and vision).
View 4 Replies View Related[URL]
What I'm doing is trying to CUT some XVID video and save them with their original format via the following steps:
Share > Create Video File > Same as First Video Clip. The progress will go through to 90%, then I will get the error message:
Unable to compress the audio [17103:10:5]
Decompress the original won't be a choice when hundreds tasks are out there.
The detail infomation about the video I'm working on, hope it will provide more details.
xxx.avi
General
Complete name : xxx.avi
Format : AVI
[Code]....
have been looking at various posts regarding audio skipping but am clueless as to how to repair or use this program successfully. I am able to import a simple mp2 file off a DVD (VOB), scan into scenes and usually play it in the timeline without skipping. I can play an mpg clip/scene, at least once, without skipping. Any kind of editing of any file results in skipping. Whether I save as a project or not, it skips. If I export, it skips. With or without Smart Proxy, it skips. With or without SP2 (after a clean reinstall) it skips. I have been editing for at least 7 years with various programs, but this is truly a first. I am really hesitant to upgrade to X4 as a fix, fully expecting it will be more of the same.
I want to clarify something. I listened very closely with a friend and concluded it is not exactly skipping. It is truncated repeating of a word in close succession, so you will hear a word immediately followed by the same word repeated but partly cut off.
I'm using Video Studio Pro X4. I'm just trying to make a simple, first movie and failing. I have a Sony HD Handycam that produces .m2ts files. I just want to be able to create HD movies that I can play on generic software on my tv. So I assumed I could create an MPG file and play it using Windows Media Player 11. After rendering an MPG file, I get no audio output.
- I imported the .m2ts files into VS
- Put two short clips in the timesline.
- Basic transition.
- Share -> Create Video File -> HDV (tried all options)
- I create the MPG file and I get no sound on playback using Media Player
I would think this is the most basic thing I could possibly be doing and it doesn't work. I am using an underpowered XP laptop, but I would think that would just be a speed issue. I'll get a better desktop for editing, but if I can't perform the most basic of tasks now I'm thinking it's a software issue.
I have a brand new machine with Iintel i7 windows 7 and 8mg ram, just bought VSX5 pro ultimate.
When I try to import "insert" audio file (mp3) I get back an error "file format mismatch" and so I am unable to insert it to the movie.
I'm only a few seconds in to my video and a few clips in... and when I play it back I get weird audio feedback like a repetitive noise that appears to be an artifact of decompression. I tried to produce an output to see if it shows up there as well (as opposed to my project view playback) and near the end of processing the short clip, I get an error message:
"Unable to access the audio codec driver"
I have completed a slide show and added 3 songs. The songs are showing up on the audio bar at the bottom, but when I do full-screen preview there is no audio. My speakers are working fine, i'm able to play songs from other programs. I am working in PS Elements 9 on Windows 7.
And another question, if i want to burn the slide show onto a DVD - what type should I buy?
I have recently upgraded my old VideoStudio 12.00 to VideoStudio Pro X4 and have only just started using the program again after a couple of years of absence so I am still on a learning curve.
Can I extract the audio from a video clip and if so how and how can I convert it, if necessary into an Audio Interchange File Format, so that I can export it to a program such as Audacity for removing background wind noise before importing the Audio back into the videoStudio project.
I have tried using all the audio filter functions in VS to remove the background noise, to no avail.
is there still no way to disble / mute the audio monitoring in the source window? I'm aware that one could press G and type in a drastically low audio gain level, but this is a clumsy workaround.
View 1 Replies View RelatedI wish to diable JPEG export preview...How?
View 3 Replies View Relatedhow I can disable the preview image for model and layout tabs?This happens when I put the cursor over these tabs.
View 6 Replies View RelatedAfter importing a .mov from a canon t3i.
No audio in the preview and even after render. Why??
When adding audio to a video file inside PS CS6 i loose the preview functionality. How can i fix this?
View 2 Replies View RelatedX6, how to disable "what's new" at startup? tx
View 4 Replies View RelatedI am making videos out of Corel VideoStudio X5 and would like to configure the software so that by default, it does not have the SmartRender option selected.
Sometimes I forget to click that OPTIONS button to go into the config screen where I need to uncheck the SmartRender box.
I'd like it so that every time I create a file, that SmartRender box is unchecked by default so that I don't have to remember to click that Options button and perform the change each and every time.
Is there a way to do that?
Did you notice that when trying to grab a node on the audio line (especially near the end of the clip) the graphic tip that pops up saying "Delete the control by dragging outside the clip" ACTUALLY PREVENTS ONE FROM GRABBING THE DARN NODE TO DO ANYTHING WITH IT ! (Just shouting at my own computer here).
Is it my computer putting these annoying popup tips on the screen or is there a way in VS to turn them off.
Smart Render looks to me like a preferred option. Is there any cases that it will be better to disable it?
View 6 Replies View RelatedUnable to start audio playback. Please confirm your audio device is properly configured or change the driver selection in Preferences: Audio Hardware. On After effects CC
Im on a mac with mavricks OS and i have done what it says and changed it but it go's back to the setting that it was on the one that does not work.
I have installed After Effects CS6 in a Mac running 10.6.8(Snow Leopard) with 4 GB ram and have installed all the updates of After Effects. Whenever I try to get the audio output, i get an error: " After Effects Warning: Unable to start audio playback. confirm your audio hardware is properly configured or change the driver selection in Preferences: Audio Hardware "
I tried to reinstall the software and also I tried the Audio MIDI Setup configuration but it too is of no use.
I have just bought Ultimate X6 and encountered serious problem already.
The question is, "Is it possible to completely disable re-scaling image on the import?"
It seems like it has only 2 options, "Fit to project" and "Keep aspect ratio".
What I want is something "Keep source resolution" because when I put an image of a map, which is 2 or 3 times larger than the project resolution, the image become completely useless due to the re-scaling.
Now, again, is there way to ditch this re-scaling?
I cannot play the ram preview, when I click the button the image gets flipped and frozen. I can scrub the timeline and see the animation I am working on, but I need a real-time preview. I downloaded the last after effects patch for mavericks, but I think this is an issue with the Iris Pro graphics card.
View 5 Replies View RelatedI have on .avi video file from friend, that I can play OK with sound in VLan player, I just installed X3 and tried to make DVD from it and got it without sound, same thing if I play this loaded .avi in X3, don't have any sound ? Is there any secret encoding I have to look for ? Somebody told me that X3 will eat any format.
I"m running W7 with trial X3?
I am having a problem with way slow audio in Ulead Videostudio 11.5 plus. I know it's an older version, but the format is similar or the same for some of the programs and maybe someone else has had that issue on even a new software version.
I managed to make some music videos with the software, after going to Youtube, as the manual for the software really isn't that great in all honesty. it simply doesn't tell you much detail on doing things. Putting in a music track to the video clips and then turning the sound on each clip all the way down wasn't a problem, but now that I want to do a normal video-I'm finding the sound in the virtual clip or whatever(which I recorded into my digital camera-mov. files), plays like Jabba the Hut off Starwars!
What do I do here to make it sound normal and be able to edit properly and share it in normal sound?I tried splitting the audio and then it sounded normal, BUT it still had that nasty slow sound on the audio. No matter if you mute it or pull the sound down in the video/audio clips in editing. How do I get rid of that slow sound or change it to make it right? Do I even need to split audio there?
So I go to edit some video and now all of a sudden there is no sound/audio playback in any of my clips. The files are fine. They play fine in other software, and in other editing software as well. But this is the my software of preference and I can't use it. WHAT THE HELL HAPPENED. The same thing has also happened to my DVD Workshop 2 software. And the same thing happened to at least 3 previous versions of VideoStudio. Everything works great and then one day BAM, no audio. The data is there because if I go ahead and render it again and play the new file on something else the audio is still there. So the problem is only on Corel/Ulead products. As a matter of fact I just downloaded the VS X3 demo. I cannot find anything about it online anywhere. If I cannot figure this out I am NEVER going to buy another Corel/Ulead product again. And I am a longtime user, way back to version 3 or 4. And for some idiotic reason I keep buying the new versions.
View 1 Replies View RelatedPreview works, but no Import from any SD or CF and even HD! Try internal and external card readers and create a new catalogue, no results. All files from cards or transfered to HD will open properly in PS!
LR 5.3; CR 8.3; PS 14.2
No Audio when capturing in VSX5. Also After I install the application any ac3 file or movie with ac3 audio will not play the audio.
View 8 Replies View RelatedSlideshow Creation: I'd like to make a slideshow DVD for Xmas to give out. I've made a lot of movies with VS but never a slide show and in fact i've never created a slideshow in any program.
Is this possible in VS10 or would it be better to use DVDLab Pro for this? If VS10 is sufficient to do this (just a fairly basic slideshow NOT HD). I really can't grasp it from the Manual since it really isn't covered in detail there (or did i miss it?) I'm looking to see what types of photos/graphics files and what resolution as well as a HOW TO. I'm clueless about slideshow creation.
Audio DVD Creation:
I do seem to recall that i did this once in VS10 - or was this a dream? Is there any tutorial on this as well?
When using the audio fade in and out to activate the fade should the bars be highlighted or dimmed? I don't seem to hear any difference between them. (Vid pro x4)
View 2 Replies View RelatedI got a new camera that outputs .avi files, and put together a video. When I click an individual clip in the timeline and play it, the audio plays... however, when I play the project, the audio does not play. It also does not play when I render it.
View 6 Replies View Related