is there still no way to disble / mute the audio monitoring in the source window? I'm aware that one could press G and type in a drastically low audio gain level, but this is a clumsy workaround.
View 1 RepliesI have quite a few merged clips that the director wants me to export so that he can watch them elsewhere than the suite. If I export them individually within Premiere CC I have sound on the exports but if I use the queue function that opens Media Encoder they are mute of audio.....is this because they are merged clips?
is there a workaround other than doing them one at a time as there is alot of clips.
In the program window, it looks like its been pushed way in on the full image in the source window. No matter what I do, I can't get it to appear the same as in the source window...
View 4 Replies View RelatedWhen I import a particuar video clip into premier, there is a problem with the audio. It plays absolutely fine until 9 minutes through when all of a sudden the audio loops back to the beginning. The video carrys on as normal untill the end of the clip but the audio starts from scratch. I have tried removing the video, renaming, moving location, starting a new project, but no matter when or how I play the video the audio starts again 9 mins through! The video plays fine in any media player except premier. I have tried exporting the video but unfortunately the audio error also gets exported. The clip is crucial to a video I'm making and can't be re-shot!
View 1 Replies View RelatedI select an audio clip in timeline to open it in Source Window.
I try to change the IN POINT from inside the Source Window and I crash. Every time.
Then I click CONTINUE and get this:
I am running PPCC 7.2.2 (4) on a MacPro with 10.8.5 installed.
I edit a ton of parties with cross dissolves on most cuts. Being able to see the waveform in effect controls and match the bass kick or snare would save me hours of time and hundreds of key strokes.
View 1 Replies View Relatedinside CFX, when i move node in a network with a lot of nodes, sometime when i drop the node, i can accidentally connect it to wrong node, as there will be a lot of connection line in that area. So is there any way i can disable this autoconnect feature temporarily ?
View 4 Replies View RelatedI have video clips on several layers in the timeline and want to mute the audio of specific video clips - they are on video lines, not the audio line.
View 4 Replies View RelatedMy mute goes on at 1Hour& 3min into my project in audio 2 timeline. Premire pro 5 .
View 3 Replies View RelatedI have a project with dozens of clips. Is there any way to mute or split audio for all or multiple clips rather than doing it for one clip at a time?
View 2 Replies View RelatedI'm new to Adobe After Effects and trying to adjust audio levels on the timeline using key points. This works great for db levels but the maximum level that can be set is -48db and this is still allowing some audio to "bleed through". I can mute the audio for the whole track, but that's not what I want - I want to mute the track at certain keypoints on the timeline.
I can't see any way to do this in After Effects.
Have reinstalled Premiere Pro 6.0.5 because I cannot drag Audio Transitions or Effects to any Timeline sequences in my Projects. Have tried modifier keys, but to no avail.
View 1 Replies View RelatedI'm trying to get my source audio to patch to tracks 3 and 4 in my record timeline. It looks like I should be able to drag on the source clips patch to change it from A1.L and A1.R to A2.L/A2.R.
View 5 Replies View RelatedI am running Windows XP, and using Videostudio 11. I know I used to have the DIsable Audio Preview button available when capturing. I have not used the software in about a year and now the button is not available for me to turn off from the capture screen. How can i turn that off? I find that during capture i get less a chance of dropped frames if i turn off the Audio Preview.
View 1 Replies View RelatedWhen I m in the source panel using the audio waveform and I add a marker the scrubber goes to the start of the clip or when I try to edit the marker it will take the scrubber to the start of the clip. Is there a way when I add a marker to stop the scubber from going to the start of the video?
View 6 Replies View RelatedWhen exporting a sequence from Premiere Pro CC, you are able to toggle between 4 drop down options within Adobe Media Encoder on what Source Range you'd like to export (Work Area, Sequence In/Out, Entire Sequence, Custom) as seen here:
Is there a way to set the default Source Range to something besides Sequence In/Out?
My reason for asking is that sometimes I export multiple sequences at once using AME's Queue. I add my custom presets to each Sequence and hit export, but SOMETIMES I may have accidentally marked an in point on my timeline and by default it's set to export only that In-to-Out part of the sequence.
I know what you may be thinking...well, just don't add any In/Out points to your sequence on the timeline or clear them first. The trouble is that I often don't see them or catch them when working quickly. In Premiere Pro CC, I use the "Lighter Brightness" Appearance setting because it's easier on my eyes after editing 10 hours a day, 6 days a week. Sure, darker looks cooler, but it kills my eyes for some reason. Anyway, PPro CC has a troublesome appearance issue in CC where it's not "optimized" for editing when you change it to a lighter appearance like it was in CS6. I've already contacted Adobe about this and another appearance issue (involving highlighted clips when in Lighter Appearance setting) and they are "actively working on fixing this appearance issue asap".
For reference, here's Premiere Pro CC in/out points in default dark appearance (notice the slightly lighter grey area):
Now here's that same in/out in "Lighter Appearance":
Not exactly optimized. Can hardly see it. This affects in/out points in the Source Window as well. Really hard to see.
Conversly, CS6 looked the best (the blue REALLY stands out making things easy to see):
is there a way to set the default "Source Range" to something else besides Sequence In/Out so that I don't end up doing what I just did and leaving for several hours while batch exporting only to come back and find that I exported only a "portion" of one of my big sequences?
Normally when I edit, I use pluralize, which creates a sequence in which I can take notes. I usually then drag that sequence into my source monitor, create in and out point and place that into my final timeline. For some reason, Premiere is not letting me drag the file I need into the source monitor. Is there something with the settings off?
View 2 Replies View RelatedThere appears to be a significant difference between the image in my Source monitor and my Programme monitor. About 2stops. Might not look much when scaled down, but conspicious when on full scale.
View 7 Replies View RelatedAfter installing the trial version of Premeire Pro I've been trying to make a quick test video using an MP4 file on my computer. I've been able to successfully import this file into Premeire however I am unable to see this video in the Source Monitor and the Program Monitor (after having added it to a sequence). I've tried re-encoding the file in AVI and WMV formats however neither of these two worked either. I've also tried just bringing in JPG and PNG images and have be unsuccessfully in viewing these as well. I have however been able to export a still image using the Monitors. So far after about 3 hours of googling the only possible answer to this issue I have been able to find is that Premeire requires 2 seperate harddrives to work; However this seems inaccurate as the program has made no attempt to warn me or even check to see if the computer I am using it on had 2 hard drives during install and start up, nor do I remember seeing it in the listed minimum requirements on the Adobe website. I am more than happy to view a lower quality preview so long as I can actually see what I am doing before rendering in a higher quality.
View 2 Replies View RelatedI just installed Smoke Ext 1. I noticed that all of my source files on an existing job, that are H264, don't show up...they just have a black screen with audio.
Is H264 not compatible with Smoke?
I can;t drag slected clip from the source monitor to the timeline.. it allows me to take audio but video won;t travel with it.. even if I just grab the video only icon.. it won't do it... i am using PP CC
View 3 Replies View RelatedI have a project which has become very disorganized over the last year of editing due to PPs poor ability to effectively share sequences/projects across multiple computers. My assistant editor used a different computer and so the links in the sequences point to multiple "source" files in the project (some in imported folders). However, there is ultimately only one original video clip. The problem is that Premiere Pro won't allow me to delete the nested versions of the source files without also REMOVING the clips in each of the sequences that uses them. For example, the project folder looks like this:
- Original File Folder
-- videoClip-001.mov
- Imported File Folder (imported on one of the many exchanges between editor and assistant editor)
-- videoClip-001.mov
- Sequence version 1 (Uses the second video clip, not the first - although they are ultimately the same video file)
If I delete the Imported File Folder, which only has a mirrored reference to the same video file as in the Original File Folder, then the clip in Sequence Version 1 dissapears. What I expect, rather, is to see a "missing media" message in the sequence so I can reconnect it to the version in the Original File Folder. But I can't. BIG HOLE in Premiere Pro CC.
Why do I want to do this? In a large project with hundreds of video clips, keeping order is very important. With the sequences using multiple "versions" of the same video clip, that order goes down the tubes and it becomes impossible to work.
I have signed up with the cloud service, Feb 2014. I have downloaded Premiere Pro and am going through training tutorial (the Eagle doco). I have downloaded and imported the video into a bin but when I put it into the source monitor (top left of standard display), I see black but hear audio. I know the video is fine as can play from desktop. Have opened another project, using other source video I also know to be good, but same problem...no video visible in source monitor but audio ok in source monitor. This is a brand new Premere Pro installation. Is there a settings change I need to make?
View 2 Replies View RelatedEver since CS4 came out I feel like I've been less productive in Photoshop due to annoying window dock/snapping. Windows are constantly sticking and resizing themselves in ways that blocks the work I am trying to do.
Also the main image itself automatically resizes to feet the work space and I find this also an annoyance. This is my main question: How can I disable "sticky" windows? In fact if there a way to get the old classic skin back that would be great, also...
because all the programs in CS4 are missing a handle bar at the top of the window, making it difficult to find a place to click to drag the window around...which also wastes time. Sometimes the classic skin is visible underneath buttons in graphic glitches..
Finally, is there a way to disable hardware acceleration completely? My processor is fast enough that it can complete tasks faster than the latency of accessing the GPU, so hardware acceleration actually slows things down. Also the hardware code has bugs in it that prevents me from opening massive images (eg, 21600 x 21600 image crashes).
I zoomed in on previous clips double clicking the timeline monitor and using the four corners tool. However, now when I drag clips in, they become distorted and zoomed in. How can I reset the monitor to match the source monitor?
View 2 Replies View RelatedI want to edit 4K source footage inside of a 1080p timeline in order to do alot of shot stabilizing throughout my project with the plug-in "Warp Stabilizer" that is standard inside of Adobe Premiere CC. BUT as soon as I drop the plug-in on my 4K footage that is inside of my 1080 timeline there is an error message that says "Warp Stabilizer requires clip dimensions to match sequence (fix by nesting)".
So I guess the "fix" is to nest my clips first then drop the plug-in on the nested clip. My question is this ... is the plug-in using the true resolution of my 4K clip that has been nested to stabilize my shot? Or is it basically using a 1080 proxy type file of my 4K source footage since it is "nested"?
I started a project and watch a lot of files in the source monitor to set IN and OUT points. When the file playes f.e. more than a minute the sound gets muted while the film is still running. First I thought it wood be a matter of my external HD from where I loaded the files. Now that I take the same or any other files from my internal sata 3 harddrive the behaviour is still the same.
When i scroll the mouse wheel to move some frames back and forth the sound is back when i hit the space bar. It's the same if i just hit the space bar once to pause and then hit it again to resume.
The effect shows after different amount of times, sometimes after 45 sec. and sometimes after 2 minutes +
I am running Pr Pro CS6 (latest update installed some days ago) on a windows 7 ultimate x64, 16 GB of ram, Nvidia GTX 670, i7 3770, HD is a WD caviar black
The movie clips come from a Panasonic Lumix FZ 150 in FullHD resolution as h.264 MP4 files.
I am quite sure that some months ago this behaviour was not present. I did not change anything on Premiere CS6 but running the updates.
I've never experienced this before, but perhaps that's beause I was never dependant on reading type in the videos I've previously produced.
how to keep the video quality of the source video when they insert it into the timeline?
Trying to insert a clip on a new timeline form a different sequence in my source monitor. But the audio track does not come through.
I am running the latest CC of Premiere on Windows 8.
I like to work in Photoshop in the old style with floating windows and palettes above my desktop and files appearing in their own window and not as tabs.
I have turned off the new interface in Photoshop CC, but I still get a large "Master Window" appearing behind the first file I open. When I click to close this window it closes my file too! How can I get rid of that big Master window?
Capturing: I have a continuous miniDV tape that I am capturing, but Premiere keeps interrupting the capturing and makes short multiple clips...I have tried it with both Scene Detect ON and OFF. I just want the miniDV tape to play and to have one continuous file. How do I prevent the capturing process from splitting up the clip?
View 4 Replies View Related