I select an audio clip in timeline to open it in Source Window.
I try to change the IN POINT from inside the Source Window and I crash. Every time.
Then I click CONTINUE and get this:
I am running PPCC 7.2.2 (4) on a MacPro with 10.8.5 installed.
In the program window, it looks like its been pushed way in on the full image in the source window. No matter what I do, I can't get it to appear the same as in the source window...
View 4 Replies View Relatedis there still no way to disble / mute the audio monitoring in the source window? I'm aware that one could press G and type in a drastically low audio gain level, but this is a clumsy workaround.
View 1 Replies View RelatedCivil 3d 2012..I used 3d orbit, it crashed. My points, point groups and newly updated description keys are gone.I have looked at all my backup files etc, and they do not want to display.
View 4 Replies View RelatedWhen creating a PDF from a DWG AutoCAD LT 2010 (running on windows 7) I get the following error.
unhandled access violation reading 0x6a162be0 exception at 6a162be0h
This only happens the second time I create a PDF - the first time it is very quick and there are no errors
I have tried a repair and a reinstall but am still having the same issue.
Civil 3D 2010 was crashing for an employee. I uninstalled Civil 2010 and attempted to install 2011. He still has a fatal crashing error. I also removed his temp files.
View 7 Replies View RelatedI keep getting the error message when I try to open this one project. Everyone else is getting the same message when opening it. It doesn't matter if it is a local file or a detached central file the same message comes up and closes Revit.
This is a 2011 Revit Architecture model but also crashes 2012.
When I m in the source panel using the audio waveform and I add a marker the scrubber goes to the start of the clip or when I try to edit the marker it will take the scrubber to the start of the clip. Is there a way when I add a marker to stop the scubber from going to the start of the video?
View 6 Replies View RelatedWhen exporting a sequence from Premiere Pro CC, you are able to toggle between 4 drop down options within Adobe Media Encoder on what Source Range you'd like to export (Work Area, Sequence In/Out, Entire Sequence, Custom) as seen here:
Is there a way to set the default Source Range to something besides Sequence In/Out?
My reason for asking is that sometimes I export multiple sequences at once using AME's Queue. I add my custom presets to each Sequence and hit export, but SOMETIMES I may have accidentally marked an in point on my timeline and by default it's set to export only that In-to-Out part of the sequence.
I know what you may be thinking...well, just don't add any In/Out points to your sequence on the timeline or clear them first. The trouble is that I often don't see them or catch them when working quickly. In Premiere Pro CC, I use the "Lighter Brightness" Appearance setting because it's easier on my eyes after editing 10 hours a day, 6 days a week. Sure, darker looks cooler, but it kills my eyes for some reason. Anyway, PPro CC has a troublesome appearance issue in CC where it's not "optimized" for editing when you change it to a lighter appearance like it was in CS6. I've already contacted Adobe about this and another appearance issue (involving highlighted clips when in Lighter Appearance setting) and they are "actively working on fixing this appearance issue asap".
For reference, here's Premiere Pro CC in/out points in default dark appearance (notice the slightly lighter grey area):
Now here's that same in/out in "Lighter Appearance":
Not exactly optimized. Can hardly see it. This affects in/out points in the Source Window as well. Really hard to see.
Conversly, CS6 looked the best (the blue REALLY stands out making things easy to see):
is there a way to set the default "Source Range" to something else besides Sequence In/Out so that I don't end up doing what I just did and leaving for several hours while batch exporting only to come back and find that I exported only a "portion" of one of my big sequences?
Normally when I edit, I use pluralize, which creates a sequence in which I can take notes. I usually then drag that sequence into my source monitor, create in and out point and place that into my final timeline. For some reason, Premiere is not letting me drag the file I need into the source monitor. Is there something with the settings off?
View 2 Replies View RelatedThere appears to be a significant difference between the image in my Source monitor and my Programme monitor. About 2stops. Might not look much when scaled down, but conspicious when on full scale.
View 7 Replies View RelatedAfter installing the trial version of Premeire Pro I've been trying to make a quick test video using an MP4 file on my computer. I've been able to successfully import this file into Premeire however I am unable to see this video in the Source Monitor and the Program Monitor (after having added it to a sequence). I've tried re-encoding the file in AVI and WMV formats however neither of these two worked either. I've also tried just bringing in JPG and PNG images and have be unsuccessfully in viewing these as well. I have however been able to export a still image using the Monitors. So far after about 3 hours of googling the only possible answer to this issue I have been able to find is that Premeire requires 2 seperate harddrives to work; However this seems inaccurate as the program has made no attempt to warn me or even check to see if the computer I am using it on had 2 hard drives during install and start up, nor do I remember seeing it in the listed minimum requirements on the Adobe website. I am more than happy to view a lower quality preview so long as I can actually see what I am doing before rendering in a higher quality.
View 2 Replies View RelatedI can;t drag slected clip from the source monitor to the timeline.. it allows me to take audio but video won;t travel with it.. even if I just grab the video only icon.. it won't do it... i am using PP CC
View 3 Replies View RelatedI have a project which has become very disorganized over the last year of editing due to PPs poor ability to effectively share sequences/projects across multiple computers. My assistant editor used a different computer and so the links in the sequences point to multiple "source" files in the project (some in imported folders). However, there is ultimately only one original video clip. The problem is that Premiere Pro won't allow me to delete the nested versions of the source files without also REMOVING the clips in each of the sequences that uses them. For example, the project folder looks like this:
- Original File Folder
-- videoClip-001.mov
- Imported File Folder (imported on one of the many exchanges between editor and assistant editor)
-- videoClip-001.mov
- Sequence version 1 (Uses the second video clip, not the first - although they are ultimately the same video file)
If I delete the Imported File Folder, which only has a mirrored reference to the same video file as in the Original File Folder, then the clip in Sequence Version 1 dissapears. What I expect, rather, is to see a "missing media" message in the sequence so I can reconnect it to the version in the Original File Folder. But I can't. BIG HOLE in Premiere Pro CC.
Why do I want to do this? In a large project with hundreds of video clips, keeping order is very important. With the sequences using multiple "versions" of the same video clip, that order goes down the tubes and it becomes impossible to work.
I have signed up with the cloud service, Feb 2014. I have downloaded Premiere Pro and am going through training tutorial (the Eagle doco). I have downloaded and imported the video into a bin but when I put it into the source monitor (top left of standard display), I see black but hear audio. I know the video is fine as can play from desktop. Have opened another project, using other source video I also know to be good, but same problem...no video visible in source monitor but audio ok in source monitor. This is a brand new Premere Pro installation. Is there a settings change I need to make?
View 2 Replies View RelatedWhen I import a particuar video clip into premier, there is a problem with the audio. It plays absolutely fine until 9 minutes through when all of a sudden the audio loops back to the beginning. The video carrys on as normal untill the end of the clip but the audio starts from scratch. I have tried removing the video, renaming, moving location, starting a new project, but no matter when or how I play the video the audio starts again 9 mins through! The video plays fine in any media player except premier. I have tried exporting the video but unfortunately the audio error also gets exported. The clip is crucial to a video I'm making and can't be re-shot!
View 1 Replies View RelatedI zoomed in on previous clips double clicking the timeline monitor and using the four corners tool. However, now when I drag clips in, they become distorted and zoomed in. How can I reset the monitor to match the source monitor?
View 2 Replies View RelatedI want to edit 4K source footage inside of a 1080p timeline in order to do alot of shot stabilizing throughout my project with the plug-in "Warp Stabilizer" that is standard inside of Adobe Premiere CC. BUT as soon as I drop the plug-in on my 4K footage that is inside of my 1080 timeline there is an error message that says "Warp Stabilizer requires clip dimensions to match sequence (fix by nesting)".
So I guess the "fix" is to nest my clips first then drop the plug-in on the nested clip. My question is this ... is the plug-in using the true resolution of my 4K clip that has been nested to stabilize my shot? Or is it basically using a 1080 proxy type file of my 4K source footage since it is "nested"?
I started a project and watch a lot of files in the source monitor to set IN and OUT points. When the file playes f.e. more than a minute the sound gets muted while the film is still running. First I thought it wood be a matter of my external HD from where I loaded the files. Now that I take the same or any other files from my internal sata 3 harddrive the behaviour is still the same.
When i scroll the mouse wheel to move some frames back and forth the sound is back when i hit the space bar. It's the same if i just hit the space bar once to pause and then hit it again to resume.
The effect shows after different amount of times, sometimes after 45 sec. and sometimes after 2 minutes +
I am running Pr Pro CS6 (latest update installed some days ago) on a windows 7 ultimate x64, 16 GB of ram, Nvidia GTX 670, i7 3770, HD is a WD caviar black
The movie clips come from a Panasonic Lumix FZ 150 in FullHD resolution as h.264 MP4 files.
I am quite sure that some months ago this behaviour was not present. I did not change anything on Premiere CS6 but running the updates.
I am running out of hard drive space which is the source for importing my images into Lightroom 4.3. I have these images backed up on an external drive. I now want to use the external drive as my source of import. How do I do that. And then how to do I find the missing files in Lightroom?
View 4 Replies View RelatedI've never experienced this before, but perhaps that's beause I was never dependant on reading type in the videos I've previously produced.
how to keep the video quality of the source video when they insert it into the timeline?
Trying to insert a clip on a new timeline form a different sequence in my source monitor. But the audio track does not come through.
I am running the latest CC of Premiere on Windows 8.
I originally did an existing surface that I was not really satisfied with. Then did an existing and proposed profile using the LandXML import/export option for getting the information from one file to another. I have since redone the existing surface to something I am more satisfied with, and set up data shortcuts, but I cannot figure out how to update the existing portion of my profile.
Essentially, I want to "unload" the previous surface information from LandXML and redirect the profile to the data shortcut information so the existing portion of the profile can be updated... preferably without disturbing the proposed portion of the profile.
There is a dialog box that lists information about the profile, but it does not want to let me modify or change anything.
Windows 7-64
8GB RAM
AutoCAD Civil 3D 2013
I recently lost 11 days on a documentary project due to Premiere's crashes, instability and refusing to launch (including almost 6 hours of Adobe tech support in India remote controlling my iMac, trying in vain to fix the issues).
I decided to give Premiere another try today, thinking Premiere's problems might have been related to the Canon XF300 used on the documentary project. Would I have better luck with different media?
I planned a very simple project: different camera (8 clips shot on Panasonic GH3, in the 72 Mbit All-I MOV mode), different media (2 AIFF audio files).
I made a fresh project, and imported the GH3 clips from the media browser. When I tried to import the 2 AIFF files, Premiere crashed.
Now I can’t even get Premiere to launch, despite rebooting and trashing every cache and Adobe preference I can find (user application support, user preferences, and ~/documents/Adobe). This happens with or without plugins in the Mediacore folder (I use all of Red Giant's plugins and quite a few of FXFactory's).
Are there any other secrets to get Premiere to launch? Now that I am locked into the CC subscription, I would like to at least have a program that can launch.
I hate to be negative, but my experience with Premiere has been absolutely horrible (and costly). And every other Mac-based editor I know who has tried Premiere CC is reporting the same instability. Especially for us television editors, stability is FAR more important than new features.
quad iMac 3.4 GHz, AMD Radeon HD 6970M 2GB, 20GB RAM, MacOS 10.9.2 Mavericks, Premiere 7.2.2
When rendering footage in the latest version of premier pro on MAC OS X 10.9.2 no matter what sequence or timeline I am in, premier keeps crashing every time I try and do anything. I have plenty of memory on a brand new MAC computer but it continues to just crash.
View 4 Replies View RelatedWhen using the healing brush, when clicking on the option key, the source point "x" does not show up. It works the same, just don't understand why the "x" is not showing up.
View 1 Replies View RelatedHow to take source point (sample) for stamp tool (etc) without using keyboard but just mouse?
View 9 Replies View RelatedCapturing: I have a continuous miniDV tape that I am capturing, but Premiere keeps interrupting the capturing and makes short multiple clips...I have tried it with both Scene Detect ON and OFF. I just want the miniDV tape to play and to have one continuous file. How do I prevent the capturing process from splitting up the clip?
View 4 Replies View RelatedWhen we use Point Cloud Feature Extraction for Autodesk® Revit® 2012 in our machine in a central file with the pcg file then there is a Run time error shown in revit. But if we work in a single file then the problem does not occur. How we ovecome this situation?
View 1 Replies View RelatedI have a unique challenge. I use my personal laptop for my CAD work at work. We are now setup with Vault 2012 and Inventor 2012 and we are setup to pull our Templates, standard files and content center parts from the vault.
I have become so busy that I would like to do some of my work at home on evenings and weekends. Other than the obvious problems of having no life and working for nothing, I am having the problem of not being able to access templates or CC parts at home. I can store the CC and templates on my C drive but am not sure where to set Inventor to point to the files on my drive or if there is an easy to do so depending on where I am.
I am having trouble changing the paper source from one cassette to another when printing from Phososhop Elements 6.0 to my Epson XP-600. I am using a Mac and I can change the paper source when using iPhoto so it must be the PS software. Both Epson and Apple agree it must be the PS software.
View 6 Replies View Related