I can;t drag slected clip from the source monitor to the timeline.. it allows me to take audio but video won;t travel with it.. even if I just grab the video only icon.. it won't do it... i am using PP CC
View 3 RepliesWhy can't I drop a clip in the Program Monitor from the Source Monitor in Premiere? When I try to move a clip from the Source to the Program Monitor, a hand displays with the "circle with a line through it" symbol.
View 2 Replies View RelatedI zoomed in on previous clips double clicking the timeline monitor and using the four corners tool. However, now when I drag clips in, they become distorted and zoomed in. How can I reset the monitor to match the source monitor?
View 2 Replies View RelatedTrying to insert a clip on a new timeline form a different sequence in my source monitor. But the audio track does not come through.
I am running the latest CC of Premiere on Windows 8.
Normally when I edit, I use pluralize, which creates a sequence in which I can take notes. I usually then drag that sequence into my source monitor, create in and out point and place that into my final timeline. For some reason, Premiere is not letting me drag the file I need into the source monitor. Is there something with the settings off?
View 2 Replies View RelatedThere appears to be a significant difference between the image in my Source monitor and my Programme monitor. About 2stops. Might not look much when scaled down, but conspicious when on full scale.
View 7 Replies View RelatedAfter installing the trial version of Premeire Pro I've been trying to make a quick test video using an MP4 file on my computer. I've been able to successfully import this file into Premeire however I am unable to see this video in the Source Monitor and the Program Monitor (after having added it to a sequence). I've tried re-encoding the file in AVI and WMV formats however neither of these two worked either. I've also tried just bringing in JPG and PNG images and have be unsuccessfully in viewing these as well. I have however been able to export a still image using the Monitors. So far after about 3 hours of googling the only possible answer to this issue I have been able to find is that Premeire requires 2 seperate harddrives to work; However this seems inaccurate as the program has made no attempt to warn me or even check to see if the computer I am using it on had 2 hard drives during install and start up, nor do I remember seeing it in the listed minimum requirements on the Adobe website. I am more than happy to view a lower quality preview so long as I can actually see what I am doing before rendering in a higher quality.
View 2 Replies View RelatedI have signed up with the cloud service, Feb 2014. I have downloaded Premiere Pro and am going through training tutorial (the Eagle doco). I have downloaded and imported the video into a bin but when I put it into the source monitor (top left of standard display), I see black but hear audio. I know the video is fine as can play from desktop. Have opened another project, using other source video I also know to be good, but same problem...no video visible in source monitor but audio ok in source monitor. This is a brand new Premere Pro installation. Is there a settings change I need to make?
View 2 Replies View RelatedI'm working on a Premiere Pro CC project with another editor. On his latest version, some of the clips on the timeline have a "+/-" or "+2" or "-2" on them. He's not sure how that happened, and I've not seen it before. What do those mean, and how do I get rid of them? I've tried Googling, but search engines don't respond well to "+/-".
View 1 Replies View RelatedNothing happens when I try to move the clips to the timeline. Have Windows 8.1. Premiere Pro CC.
View 3 Replies View RelatedI started a project and watch a lot of files in the source monitor to set IN and OUT points. When the file playes f.e. more than a minute the sound gets muted while the film is still running. First I thought it wood be a matter of my external HD from where I loaded the files. Now that I take the same or any other files from my internal sata 3 harddrive the behaviour is still the same.
When i scroll the mouse wheel to move some frames back and forth the sound is back when i hit the space bar. It's the same if i just hit the space bar once to pause and then hit it again to resume.
The effect shows after different amount of times, sometimes after 45 sec. and sometimes after 2 minutes +
I am running Pr Pro CS6 (latest update installed some days ago) on a windows 7 ultimate x64, 16 GB of ram, Nvidia GTX 670, i7 3770, HD is a WD caviar black
The movie clips come from a Panasonic Lumix FZ 150 in FullHD resolution as h.264 MP4 files.
I am quite sure that some months ago this behaviour was not present. I did not change anything on Premiere CS6 but running the updates.
I want to edit 4K source footage inside of a 1080p timeline in order to do alot of shot stabilizing throughout my project with the plug-in "Warp Stabilizer" that is standard inside of Adobe Premiere CC. BUT as soon as I drop the plug-in on my 4K footage that is inside of my 1080 timeline there is an error message that says "Warp Stabilizer requires clip dimensions to match sequence (fix by nesting)".
So I guess the "fix" is to nest my clips first then drop the plug-in on the nested clip. My question is this ... is the plug-in using the true resolution of my 4K clip that has been nested to stabilize my shot? Or is it basically using a 1080 proxy type file of my 4K source footage since it is "nested"?
Capturing: I have a continuous miniDV tape that I am capturing, but Premiere keeps interrupting the capturing and makes short multiple clips...I have tried it with both Scene Detect ON and OFF. I just want the miniDV tape to play and to have one continuous file. How do I prevent the capturing process from splitting up the clip?
View 4 Replies View RelatedI am having an issue with Premiere 6.0 that I can't seem to solve. Some audio clips are showing up in red in the timeline and they just don't work at all. Here is how this went down.
I had to format my computer due to Windows related troubles and so I reinstalled the OS, installed all of my Adobe software and dropped the files back into their original locations. When I fired up premiere and opened the project, everything was looking fine and dandy until certain clips showed up in red and just didn't work.The only clips that were affected were audio tracks from AVI files that I separated from the video. They are not missing , premiere knows where they are and if I drag one into the timeline it will work just fine.
I see that all but the first 7 seconds of the edited clips on the timeline are now cross-hatched. There's no video or sound when I scrub over the cross-hatched portion. I've tried removing all effects and transitions but no joy. There are several other sequences in this project which are all working normally.
View 9 Replies View RelatedI've never experienced this before, but perhaps that's beause I was never dependant on reading type in the videos I've previously produced.
how to keep the video quality of the source video when they insert it into the timeline?
i have cc 7.2.1, and every basic operation i do on the timeline , moving clips, trimiming, scrubing on the timeline everything lags, its not fluid. When i do a simple scrubring on the timeline, the CTI takes sometime to get to the position i selected to do the playback.
But the worst part is the trimming or moving clips, it takes ages before i get an image on the program monitor. If i move a clip into a middle of 2 clips it takes ages to see those two little privews images with timecode, to see where to put it. So is very hard to edit like this.
Another odd thing is when in redering mode i select to use sofware only i dont have drop frames, when i chose cuda i have drop frames!!
I´m editing h254 from a 5d and 7d on externa llaccie usb 3 , have the a macbookpro 16g i7, iris pro and nvidia 750m, and a external samsung, via DVI.
I've been working the last 6 months with 4 GH2s and ran into some strange troubles when initially importing them to the timeline. 2 hour shots are divided into 6 or 7 different files, and when brought into PP the first clips audio was assigned to all the other remaining clips. This was pretty strange, but I fixed it by using TSmuxer. It was added time in the workflow/set up, but in the end I could produce;
The latest update of PPCC now combines the entire 2 hours of footage into each of the 7 files being imported. So it is importing 2 hours of footage 7 times for each camera. The conforming is taking forever! For 4 cameras it's conforming 14 hours of footage each, when it should literally be a 7th of that.
It is taking up large amounts of time and disk space.
How can separate Multicam Monitor from Program Monitor? I would like to put Multicam monitor on one monitor and hte Program on another.
View 2 Replies View RelatedHow can I view a preview how all the video transition looks between 2 clips in Premiere Pro CS5 before I choose the one I want to use.
I always use Adobe Bridge CS5 when I need to see a fosmag on the effects in After Effects CS5, but can not get it to work and then I can also see the Video Transitions in Adobe Premiere CS5
Syncing in plural eyes is good with our pro res files, but when I try and sync with some mp3 files from a zoom h1 recorder it goes black at the bottom of the timeline and responds really buggy.
View 1 Replies View RelatedI have recently upgraded to Smoke 2012 sp2 and have a small issue regarding the reordering of my clips in the source area.
On 2011 when you placed clips in the source area in a specific order and saved it to the library and when you recalled it from the library it would put the clips back in exactly the same place you left them. Now in 2012 when you do that it re-orders them in some sort of chronological order.
Is there a setting that I'm not aware of that will stop doing that as I place them in a specific structure which makes sense to me and is easy to find and understand on large builds, now I'm having to sift through the clips and waste time finding what I did last and checking through versions to find the latest one.
I can't seem to get source clips to Gang with the timeline in the record area, did we lose this? I always gang up my reference with my conform so I really hope we havn't lost this!
View 1 Replies View RelatedIn 2012 it was very easy to select a gap segment and click color source in the soft effects. In 2013 it appears to be much more difficult, you need to create it in a folder then edit it into a sequence. Am I missing something? I wish there was a color source option in the effects ribbon.
View 2 Replies View RelatedWhere colour source on the timeline is. I am always droping black or coloured frames into the timeline either as a background for some softFX text or even as a fill for the softFX text so I can then track that text to the background.
View 9 Replies View RelatedI'm importing a 878,367KB .mov file into Premiere Pro - and while the full audio is there, the video screen is just green.When I put it into a sequence, the preview pane is black - and when I try to render it, it says "Error compiling movie. Unknown error."
View 4 Replies View RelatedI might be being really thick but my old method of managing clips and handles in a master was to perhaps conform from rushes with 75fr handles, save that conform but then in my wip master I would consolidate all sees down to 10fr. This way if I was sharing shots around the facility you could match a shot out (using the old match to segment preference rather than match to source) and it would respect the handles you had set in your master.
I can't seem to replicate that old behavior in 2013 smoke. It will either match to source or to just the segment without handles. How can I get it to match out with the handles I have consolidated?
When matching a source clip from the new sequence area it appears that you now have to have the widget on the clip you wish to match rather than just select the clip. Is this a change in the way 'match' works or is it a bug?
It was always nice to just tap the clip and press match rather than now having to scrub your widget to the right layer and clip before pressing match.
Just upgraded to X6 last week to start to edit a short movie that I am working with my students. Since is our first short with a lot of takes (about 74 takes in 7 scenes) and we had a lot of problems shooting because take more time them we thought! Well, now I am editing it but I need to export the edited clips (takes) in the time line to add special effects in HitFilm, so theres a way to export all those clips as MP4 or any format in a batch?
View 5 Replies View RelatedI've just watched an Adobe TV video by Julianne Kost about video features in PS CS6.At one point she converts a video clip into a Smart Object in order to apply a PS filter, but when I do this, the entire Filters menu is grayed out.
The mp4 clip plays normally in the Timeline otherwise.
What does this icon indicate? See the attachment.
View 2 Replies View Related