Premiere Pro :: GH2 Video File - Clips Audio Was Assigned To All The Other Remaining Clips?
Mar 5, 2014
I've been working the last 6 months with 4 GH2s and ran into some strange troubles when initially importing them to the timeline. 2 hour shots are divided into 6 or 7 different files, and when brought into PP the first clips audio was assigned to all the other remaining clips. This was pretty strange, but I fixed it by using TSmuxer. It was added time in the workflow/set up, but in the end I could produce;
The latest update of PPCC now combines the entire 2 hours of footage into each of the 7 files being imported. So it is importing 2 hours of footage 7 times for each camera. The conforming is taking forever! For 4 cameras it's conforming 14 hours of footage each, when it should literally be a 7th of that.
It is taking up large amounts of time and disk space.
View 6 Replies
ADVERTISEMENT
Sep 15, 2012
When I go to render a video that is composed of video clips and an .mp3 music file, I'd like to get the finished file into as big of a file as I can. In order to do that, I select the MPEG-4 option. The good news is it typically will result in an approx file size of 250MB for a 2 1/2 minute video, versus 170MB for any other file extension. The bad news is the audio is full of pops and noise. The audio remains fine with any other option other than MPEG-4.
I've tried numerous ways to 'reconstruct' the file...using different audio file extensions (it seems to prefer .wma files but there is a noticeable drop in clarity), rendering the video only then adding the audio file and rendering again...nothing works. I've also tried to modify the rendering options in each video selection that Corel offers (this is in the window that pops up asking for the file name just before you render it), but the audio never gets better.
View 2 Replies
View Related
Dec 3, 2013
audio clips, usually less than 20 seconds, are now being cut off at the last few seconds of the clip. Can't figure out wny it is happening or how to correct it. If I select Edit, Play Original, I can hear the full clip.
View 1 Replies
View Related
Mar 24, 2014
I have a synced three camera project that I have almost finished editing. I want to select the last video clip in my sequence and roll it back, while keeping the audio in place. The idea is to fade the picture to black while the synced audio continues as credits roll over black. However, I cannot find a way to select video only on the clips at the beginning and end of the sequence. I can select and separate any video clip in the middle of the sequence, but not the clips at the ends. I must be missing some keystroke. How do I do it?
I am noe to Premiere Pro and am using version CC.
View 1 Replies
View Related
Dec 1, 2013
I am having an issue with Premiere 6.0 that I can't seem to solve. Some audio clips are showing up in red in the timeline and they just don't work at all. Here is how this went down.
I had to format my computer due to Windows related troubles and so I reinstalled the OS, installed all of my Adobe software and dropped the files back into their original locations. When I fired up premiere and opened the project, everything was looking fine and dandy until certain clips showed up in red and just didn't work.The only clips that were affected were audio tracks from AVI files that I separated from the video. They are not missing , premiere knows where they are and if I drag one into the timeline it will work just fine.
View 6 Replies
View Related
Sep 26, 2013
On Adobe Premiere Pro CC (up to date, running OSX 10.8.5), when I select an audio clip and a .mov clip and attempt to use the audio sync seen in several tutorials, that option is not available. I only see in points, out points, time code and clip marker for syncronize points. Are there only certain file types that can be synced this way or is there a setting I'm missing?
View 2 Replies
View Related
Feb 17, 2014
How can I view a preview how all the video transition looks between 2 clips in Premiere Pro CS5 before I choose the one I want to use.
I always use Adobe Bridge CS5 when I need to see a fosmag on the effects in After Effects CS5, but can not get it to work and then I can also see the Video Transitions in Adobe Premiere CS5
View 1 Replies
View Related
Jul 9, 2013
It seams that when editing in After Effects (CS6) despite doing everything i've been told to do i get no audio when editing video clips imported from my digital camcorder. The only audio it seams i can hear in it is an actual song or audio file (MP3) and the worst part is when i render out the video after adding my effect even when i check the audio output box in the Output Module, i keep most render settings the way they are? but i have tried everything that i have seen suggested but nothing seams to work and no matter what i do i cannon manage to get any audio from my finished products unless there is an actual song in it.I must also add that in the Output Module i have tried many formats such as MPEG4, H.26, AVI, WAV, Windows Media and many others, none of them make a difference to the audio, only the quality of the video.
View 4 Replies
View Related
Mar 17, 2014
I am exporting dailes clips.We record dual system and there are two different audio levels - on the two different channels.However, when I export a clip from Premiere and set the audio option tol the uncompressed codec it defaults to a "single track" audio layout with no option to change. However, if i change the codec to AAC or any other I am allowed to chose whether I want a single mono track or a stereo track.
Additionally - if that single uncompressed track is an amalgamation of my original two tracks - or if it has just defaulted to one or the other.
View 7 Replies
View Related
Feb 14, 2011
I have several movie clips I want to turn the volume down to the same level. I don´t want to do it one clip at a time. When I select multiple clips, the sound level bar turns gray and I can´t change the level.
View 3 Replies
View Related
Sep 22, 2011
I am using VideoStudio v11. I have a long section of video which is of someone making a speech. I want to insert some cut-aways into the sequence, whilst obviously retaining the audio running sequence.
I have split the audio from the video track, but I can't seem to figure out how to remove a section of the video and replace it exactly with a cut-away section of video. I need to keep the video and audio in sync. Maybe I am going about it wrong and don't need to split the audio off - but then how would I insert just a clip of video without disturbing the audio.
View 1 Replies
View Related
Feb 2, 2014
When using an HDMI link (from my Acer laptop) to an A/V receiver, no audio is sent over the HDMI when using Lightroom5 to play video clips, but it works OK when playing the same clips directly from the files). Playing YouTube videos, and tutorials, also work correctly (audio on the HDMI).(The audio is output from the laptop speaker, and the 3.5mm jack.)
View 5 Replies
View Related
Feb 10, 2014
I'm attempting to create a dynamic link from PR to AE (both CC) by right clicking on the desired clip in my PR sequnce and selecting "Replace with AE Comp". Doing so properly launches AE, asks me to save the AE project, and creates a comp with the correct parameters (duration, frame rate, size, etc) with the desired comp name. The sequence in PR shows the linked comp with the correct comp name. However, in both AE and PR the video clip is simply black. In my understanding of Dynamic Link, the original files (clips) should be sent over to the AE project. In my case, I only see the project with no associated files. Is there a trick (or a known reason) why the files would not be transpored to the AE project?
View 7 Replies
View Related
Dec 17, 2013
We have an iMac workstation here running Premiere that will not open projects or import clips. Here's the sequence of events that led to this:
1. Premiere was locking up on the splash screen whenever it got to "ImporterQuicktime.bundle". I tried trashing preferences and launching with plug-ins disabled and received the same freeze. Based on forum recommendations I removed "ImporterQuicktime.bundle" and "ExporterQuickTimeHost.bundle" from the plug-ins folder inside the package. The software launched fine - but none of the Quicktime files in the project were working. So I then took copies of the above 2 files from the iMac next to this one, with the exact same configuration, and pasted them into the plug-ins folder. Since then - launching the software has generated the below errors.
2. Attempting to open any project gives a long error that starts as: The preset used by one or more sequences in this project requires third-party components that could not be located.
3. Starting a new project and attempting to drag any Quicktime ProRes media into the project gives the error: File Format not supported.
I have trashed the preferences, re-installed the Pro Apps Quicktime Codecs, de-authorized the computer and re-authorized it, and upgraded Adobe Premiere from 7.0 to 7.2. None of which fixed the issue.
I'm thinking about trying a complete re-install of Premiere next.
Here's the details:
Premiere Pro CC 7.2
Mac OS 10.8.5
iMac late 2012 model, 32Gb RAM, 2Gb video card
View 1 Replies
View Related
Feb 25, 2013
How do you select Multiple clips in a long sequence with many clips? I am cutting a short documentary and I need to move around a large quantity of clips. How do I quickly select a bunch of clips?
View 2 Replies
View Related
Oct 5, 2011
Have just started working on VS and discovered a strange issue. I can put a piece of video in the clip window to mark in/out points and it plays fine. When I drag it to the timeline and play as a clip, there is no audio!
View 1 Replies
View Related
Aug 27, 2013
I am a long time Pinnacle Studio user trying out the demo for VS6 Pro. Is there a way to adjust the volume at a point in the project so that the audio to the right follows the volume setting, including all the clips to the right of the edit point? I like to bring down the audio for a good portion of the project then bring it back up etc. It would be very time consuming to have to do this for each clip.
View 5 Replies
View Related
Jun 5, 2011
What are best practices to perform audio normalization between clips in VideoStudio? Can VideoStudio ProX3 display a visual of wave form from a sound track in order to do audio normalization between clips?
View 3 Replies
View Related
Jun 26, 2011
I've have saved a video/photo project that also has several audio tracks. These tracks all seem to be at different audio levels. Is there an easy way of adjusting them all so they will play at similar level ? Or do I have to go into each one and rely on my ears to get them to sound about the same?
View 8 Replies
View Related
Mar 1, 2011
I am currently trying out Corel VideoStudio Pro X4,when i insert different clips into the timeline, as the project plays the audio doesn't start instantly, and there's almost like a 1sec delay before the audio appears.
I seen that there was audio fade in/out options, which can be set to 1-999 (but no 0)
View 4 Replies
View Related
Jan 24, 2012
why my audio level in my clips diminishes when imported into X4? The level is fine when the un-edited clip is viewed in Windows Media Player but is significantly lower in X4 when viewed in "Clip Mode" and even lower in "Project Mode".
I've raised the audio level as high as 500% but it's just not the same level and quality as actually recorded.
I've attached the properties from a short clip.
View 1 Replies
View Related
Mar 14, 2013
I've been using WMM for all my productions and have had problems currently. With the importing of clips, audio and burning of DVD's. When I first started making home movies I dabbled in the VideoStudio Pro x3 and thought it was too complicated. Now I'm wanting something more and have decided to try and use it.
So here's the question. I notice that I do not have the Burn option on my menu. Again this program came on the computer when I purchased in 2011. I'm running an HP Laptop with Windows 7 premium vista if that sounds correct. Not too savy on computers but learn as I go. Wondering if this program is a scaled down version of the StudioVideo Pro x3 and have to add that feature somehow.
View 4 Replies
View Related
Feb 24, 2011
I have purchase VideoStudio Pro X4 and in the sound library there are only 2 sound clips to choose from!
View 4 Replies
View Related
Apr 30, 2013
How is the best way to keep sync with clips that have audio. In Premiere for example, when a clip contains audio it handles both video and audio as a single thing until I explicitly unlink them. But in Smoke, even with the option Select linked, which as far as I can tell it only works for selecting and activate that little arrow (do not remember the name of the function) in the tracks table, keeps all ok but only on that track.
This is the normal operation of Smoke? He really will always treat the audio and video of same clip as separate things? Am I missing something? Because at least for me, that's came from Premiere, always be remembering to set all the tracks and always go to the menu and select Enable linked is what most complicates the editorial work in Smoke.
View 6 Replies
View Related
Sep 5, 2013
I really want to be able to use the new Synchronize feature of PP (Clip > Synchronize), but I tried selecting two video clips (a video clip, and two audio tracks), and right-clicking, but the option to Synchronize is greyed out. If I select certain clips, then it appears, but I don't see what the pattern is. It seemingly picks random clips to not sync.
View 1 Replies
View Related
Mar 27, 2014
I've been working on a project that involves 45 separate clips. I have cut the unwanted stuff out of each clip - was a lot easier than I thought - just dragged the start and end point icons. So now I have 45 clips which just need joining together. When I shot all the footage and uploaded it to my computer the file I saved as Clip 1 may not be what I want to start the movie with. How do I go about shuffling the order of the clips and combining them all into one to form my movie - and when I join two clips together does Premiere Pro automatically join the sound.
View 1 Replies
View Related
Aug 21, 2011
I have a project with dozens of clips. Is there any way to mute or split audio for all or multiple clips rather than doing it for one clip at a time?
View 2 Replies
View Related
Jan 13, 2014
I am completing a 52-minute program, with 20 short sequences shot in ProRes 422 (50 Mbps) and saved to MXF OP1a files. The package looks good when output to Blu-Ray, but I will need to output for broadcast, and the broadcaster prefers MXF deliberables. My Question: Is there any significant loss of quality by saving 20 MXF files (with dozens of ProRes clips) to a final MXF container?
View 7 Replies
View Related
Feb 13, 2014
It's listed as a feature numerous times in the forums but I haven't been able to export cut down stock footage as individual clips.
View 3 Replies
View Related
Apr 12, 2014
I have multiple sequences that use clips from an interview that show diagonal lines through them in the timeline. Not all files from the interview have these diagonal lines. These problematic clips do not contain audio or video when the playhead is on them. They don't even have a thumbnail pic in the sequence while other shots from the interview do. How I can get these to work in the timeline again?
View 8 Replies
View Related
Dec 9, 2013
I'm working on a Premiere Pro CC project with another editor. On his latest version, some of the clips on the timeline have a "+/-" or "+2" or "-2" on them. He's not sure how that happened, and I've not seen it before. What do those mean, and how do I get rid of them? I've tried Googling, but search engines don't respond well to "+/-".
View 1 Replies
View Related
