I've have saved a video/photo project that also has several audio tracks. These tracks all seem to be at different audio levels. Is there an easy way of adjusting them all so they will play at similar level ? Or do I have to go into each one and rely on my ears to get them to sound about the same?
View 8 RepliesI make family videos that have photos and video clips in the order taken. I then add a background music to the music track. I have always been able to lower background music inserted in the music track over the video clips, and then bringing the level back up after the video clip is over. With VS X6, this is not working any more. One hears the level of the music lower and the level comes back up but not at the places that I have done them. Most of the time I use the Smart Music, but I have seen this problem with other music.
View 9 Replies View RelatedI have VS4 and yesterday worked on a project with a music track and a voice-over. I created a track I liked using SmartSound, the automated music track creation app that comes with VS4 (and there's a version for VS2 & VS3 as well). A few seconds after the music track started, I wanted to dip the level so that I could insert a voice-over, but there was no way I could figure out to reduce the music level just during the voice-over. I had to reduce the level of the entire SmartSound track so that you can hear the voice-over above it.
I could have created multiple SmartSound tracks for this, using normal volume before and after the voice-over, and reducing the level during the voice-over. But that would create music that didn't flow as a continuous piece, and I like the continuous track.So... is there any way to change the level in the middle of a SmartSound track? I would normally click on the track in the timeline, split it into segments, and set the levels for each segment. However, the SmartSound track wouldn't let me do that.
Have just started working on VS and discovered a strange issue. I can put a piece of video in the clip window to mark in/out points and it plays fine. When I drag it to the timeline and play as a clip, there is no audio!
View 1 Replies View RelatedI am a long time Pinnacle Studio user trying out the demo for VS6 Pro. Is there a way to adjust the volume at a point in the project so that the audio to the right follows the volume setting, including all the clips to the right of the edit point? I like to bring down the audio for a good portion of the project then bring it back up etc. It would be very time consuming to have to do this for each clip.
View 5 Replies View RelatedWhat are best practices to perform audio normalization between clips in VideoStudio? Can VideoStudio ProX3 display a visual of wave form from a sound track in order to do audio normalization between clips?
View 3 Replies View RelatedI am currently trying out Corel VideoStudio Pro X4,when i insert different clips into the timeline, as the project plays the audio doesn't start instantly, and there's almost like a 1sec delay before the audio appears.
I seen that there was audio fade in/out options, which can be set to 1-999 (but no 0)
why my audio level in my clips diminishes when imported into X4? The level is fine when the un-edited clip is viewed in Windows Media Player but is significantly lower in X4 when viewed in "Clip Mode" and even lower in "Project Mode".
I've raised the audio level as high as 500% but it's just not the same level and quality as actually recorded.
I've attached the properties from a short clip.
I've been using WMM for all my productions and have had problems currently. With the importing of clips, audio and burning of DVD's. When I first started making home movies I dabbled in the VideoStudio Pro x3 and thought it was too complicated. Now I'm wanting something more and have decided to try and use it.
So here's the question. I notice that I do not have the Burn option on my menu. Again this program came on the computer when I purchased in 2011. I'm running an HP Laptop with Windows 7 premium vista if that sounds correct. Not too savy on computers but learn as I go. Wondering if this program is a scaled down version of the StudioVideo Pro x3 and have to add that feature somehow.
I have purchase VideoStudio Pro X4 and in the sound library there are only 2 sound clips to choose from!
View 4 Replies View RelatedI know this is an easy one, but how do you change audio levels (volume) inside a song track, including length of fade in and fade out?
View 2 Replies View RelatedI have several movie clips I want to turn the volume down to the same level. I don´t want to do it one clip at a time. When I select multiple clips, the sound level bar turns gray and I can´t change the level.
View 3 Replies View RelatedI am using VideoStudio v11. I have a long section of video which is of someone making a speech. I want to insert some cut-aways into the sequence, whilst obviously retaining the audio running sequence.
I have split the audio from the video track, but I can't seem to figure out how to remove a section of the video and replace it exactly with a cut-away section of video. I need to keep the video and audio in sync. Maybe I am going about it wrong and don't need to split the audio off - but then how would I insert just a clip of video without disturbing the audio.
I have a project with dozens of clips. Is there any way to mute or split audio for all or multiple clips rather than doing it for one clip at a time?
View 2 Replies View RelatedWhen I go to render a video that is composed of video clips and an .mp3 music file, I'd like to get the finished file into as big of a file as I can. In order to do that, I select the MPEG-4 option. The good news is it typically will result in an approx file size of 250MB for a 2 1/2 minute video, versus 170MB for any other file extension. The bad news is the audio is full of pops and noise. The audio remains fine with any other option other than MPEG-4.
I've tried numerous ways to 'reconstruct' the file...using different audio file extensions (it seems to prefer .wma files but there is a noticeable drop in clarity), rendering the video only then adding the audio file and rendering again...nothing works. I've also tried to modify the rendering options in each video selection that Corel offers (this is in the window that pops up asking for the file name just before you render it), but the audio never gets better.
How can I reduce the audio volume for all the clips in the project? The original sound from the video clips is just ambient noise. I want to reduce it all by the same amount throughout the project, so that the music I put on the music track will be easier to hear, with the ambient noise being only a soft background. I can't find any control that lets me change the volume for all clips at once, and the documentation isn't very clear.
View 8 Replies View RelatedI've been working the last 6 months with 4 GH2s and ran into some strange troubles when initially importing them to the timeline. 2 hour shots are divided into 6 or 7 different files, and when brought into PP the first clips audio was assigned to all the other remaining clips. This was pretty strange, but I fixed it by using TSmuxer. It was added time in the workflow/set up, but in the end I could produce;
The latest update of PPCC now combines the entire 2 hours of footage into each of the 7 files being imported. So it is importing 2 hours of footage 7 times for each camera. The conforming is taking forever! For 4 cameras it's conforming 14 hours of footage each, when it should literally be a 7th of that.
It is taking up large amounts of time and disk space.
I have a 3d render that has some semi transparent areas (shadows on matte objects) I want to get rid off. In AE a can simple adjust the alpha levels and set everything under 25 to be 0 for example.
In PS the entire alpha channel seems to be out of reach.. it's not in the Channels tab? I can add one but PS fills it with an B&W version of my RGB image.. What trick I'm a missing here?
Using Photoshop CS3. I am trying to adjust the levels on a very simple bitonal scan from PDF. When I adjust them by going to, Image, adjustments, levels, the preview of it works and it shows what I want, but when I hit OK, it dissapears. If I go to Layers, New Adjustment Layer, Levels, it shows up fine until I save it.. I am trying to save it as a PDF file, and I am saving it with Adobe 6 (1.5) because of compatibility issues (so I've read), it should save layers. But its not saving. Or maybe it's not opening in my Adobe Acrobat? is there an update I need or something? Is there a step I am missing? is anyone else having this problem? Even so, the Level adjust should work regularly while in PS CS3.
View 1 Replies View RelatedI have an image I want to edit. It is a png tileset for a game, with opaque icons with semi-transparent background (yep the result in game is just as annoying as it sounds).
I'm not satisfied with background and want to make it more transparent (or maybe completely transparent). How do I do that?
There are adjustment tools in PDN that can modify separate channels; AFAIK alpha is technically identical to color channels but these tools only let me edit RGB.
how to specify a layer as alpha mask either.
I take a lot of underwater pictures usually quite badly . I am looking for adjusting the color levels.
I am guessing I have to create layers to adjust them properly as just fiddling with the Red on the main image isn't really giving me great results.
I found out that there is a way to show clipping areas in Photoshop when adjusting levels via an adjustment layer. While moving the slider, you hold down the ALT key.
I tried this in PSP X3 and it does not work. Any feature for seeing the clipping preview is available in Paint Shop Pro? It's a nice feature.
I was having trouble with my video being too slow (Nikon d5300 recording at 1920x1080 and 60i frame rate) and I changed it from 59.94 to 29.97 and it corrected my video but now my audio is too slow. What can I change now to fix audio so that the video stays corrected?
View 22 Replies View RelatedI have a strange issue with PP CC which did not occur on CS6. The audio levels are slightly altered. This issue is clear if I compare them through Audition or Vegas Pro, when they are not altered.
For example, if I have a video with a soundtrack, and I enter another audio clip in another track for vocals, the vocals are lower then they actually are (like -12 instead of -6). It becomes evident when I open the sequence in Audition, where the levels are fine. What's happening? I really need to work with precise levels.
audio clips, usually less than 20 seconds, are now being cut off at the last few seconds of the clip. Can't figure out wny it is happening or how to correct it. If I select Edit, Play Original, I can hear the full clip.
View 1 Replies View RelatedI have a synced three camera project that I have almost finished editing. I want to select the last video clip in my sequence and roll it back, while keeping the audio in place. The idea is to fade the picture to black while the synced audio continues as credits roll over black. However, I cannot find a way to select video only on the clips at the beginning and end of the sequence. I can select and separate any video clip in the middle of the sequence, but not the clips at the ends. I must be missing some keystroke. How do I do it?
I am noe to Premiere Pro and am using version CC.
How is the best way to keep sync with clips that have audio. In Premiere for example, when a clip contains audio it handles both video and audio as a single thing until I explicitly unlink them. But in Smoke, even with the option Select linked, which as far as I can tell it only works for selecting and activate that little arrow (do not remember the name of the function) in the tracks table, keeps all ok but only on that track.
This is the normal operation of Smoke? He really will always treat the audio and video of same clip as separate things? Am I missing something? Because at least for me, that's came from Premiere, always be remembering to set all the tracks and always go to the menu and select Enable linked is what most complicates the editorial work in Smoke.
It seams that when editing in After Effects (CS6) despite doing everything i've been told to do i get no audio when editing video clips imported from my digital camcorder. The only audio it seams i can hear in it is an actual song or audio file (MP3) and the worst part is when i render out the video after adding my effect even when i check the audio output box in the Output Module, i keep most render settings the way they are? but i have tried everything that i have seen suggested but nothing seams to work and no matter what i do i cannon manage to get any audio from my finished products unless there is an actual song in it.I must also add that in the Output Module i have tried many formats such as MPEG4, H.26, AVI, WAV, Windows Media and many others, none of them make a difference to the audio, only the quality of the video.
View 4 Replies View RelatedWhen using an HDMI link (from my Acer laptop) to an A/V receiver, no audio is sent over the HDMI when using Lightroom5 to play video clips, but it works OK when playing the same clips directly from the files). Playing YouTube videos, and tutorials, also work correctly (audio on the HDMI).(The audio is output from the laptop speaker, and the 3.5mm jack.)
View 5 Replies View RelatedI am having an issue with Premiere 6.0 that I can't seem to solve. Some audio clips are showing up in red in the timeline and they just don't work at all. Here is how this went down.
I had to format my computer due to Windows related troubles and so I reinstalled the OS, installed all of my Adobe software and dropped the files back into their original locations. When I fired up premiere and opened the project, everything was looking fine and dandy until certain clips showed up in red and just didn't work.The only clips that were affected were audio tracks from AVI files that I separated from the video. They are not missing , premiere knows where they are and if I drag one into the timeline it will work just fine.
On Adobe Premiere Pro CC (up to date, running OSX 10.8.5), when I select an audio clip and a .mov clip and attempt to use the audio sync seen in several tutorials, that option is not available. I only see in points, out points, time code and clip marker for syncronize points. Are there only certain file types that can be synced this way or is there a setting I'm missing?
View 2 Replies View Related