I was having trouble with my video being too slow (Nikon d5300 recording at 1920x1080 and 60i frame rate) and I changed it from 59.94 to 29.97 and it corrected my video but now my audio is too slow. What can I change now to fix audio so that the video stays corrected?
View 22 RepliesI am using VS ProX5. While capturing the video captures normally for a few seconds and then stucks and moves slowly with one or two frames per second and the audio is very choppy.
Other video clips in my PC plays OK in VS.
I am capturing from my Panasonic digital camera through firewire cable/port to my Windows XP PC.
It used to work properly and for the past few months it is giving problem and I left it from there.
I need to slow down a clip of video from its original frame rate. The original video is a piece of CCTV footage and is timelapse with a frame rate of 3fps and a total duration of 22 secs. I need to slow this footage down to create a slomo clip. can this be done in CS5ext?
View 8 Replies View RelatedI need to do a frame rate conversion and interlace of 24P to 29.97 interlaced for inclusion into A 29.97 timeline.
I'm on Win 7 and CS6.
Is any plugin required with CS6?
Or, can After Effects do it alone?
If a plugin is required, what is the best one for quality?
Or what stand-alone utility is most highly recommended? I thought I'd read on a Google search that Twixtor or "Magic Bullet" by Red Giant. I just spoke to Red Giant and they said they have nothing that does this.
It used to be that whenever i would move the cursor in adobe premier with either the left or right arrows or by simply clicking and dragging it, it would play the audio from that frame. But it is not doing it anymore, I think i must have accidently hit a shortcut key or something to change it in settings i dont know. But it would be good if I could get the setting to change it back. I know for a fact that my laptops speakers do work, so its not that.
View 1 Replies View RelatedI create animated gifs frequently using the Frame Animation pallet. The default frame rate starts out as 10 seconds, so I always have to change it to 4 seconds. Is there anyway to reset the default frame rate that I start out with to 4 seconds, so that I don't have to change it every time?
Preferences did not yield any promising menus
I know the standard default reset with many Adobe products is to change it without a document open, but in PS CS5.5 if you do not have a document open the frame rate option is greyed out
______________
CS5.5
MacPro Tower
Mac OS 10.8.2
I use this software to extract some graphics and animations. But when i export an animation to .gif it slow down. So, i export each frame to .bmp. I open in photoshop all the .bmp, create an animation, but when i export it...yeah the same problem... the .gif is slower.
I record a video as an example. [URL] ..........
I don't know why this happens.
Note: This is an example. This happens with almost animated gifs i create with photoshop. I use Photoshop CS5.5)
Is it possible to set PAL as default Frame Rate?
I tried MaxStart.max way, but it doesn't work (I created a new file with PAL frame rate and saved it as MaxStart.max into 3ds Max folder root)
I am trying to convince Smoke to import audio @48kHz. I have a new project within Smoke reading the input sample rate from my AJA card at 48K. The file that I am importing is 48K and it plays at 48K from the Mac desktop. When I import the file into smoke it sample rate converts it to 44.1 KHz.: Option_click on the file in the Smoke desktop confirms this. All hardware input and output sample rates are set to 48K. Is there a setting that I am missing in Smoke?
The default sound for my Mac is set to the AJA card and no other audio software is running.
I am having an issue with my audio sample rate. For some reason it is set at 8 khz by defualt when I am exporting. This was not an issue until the latest update (2 weeks ago). I'll try and give all the info I can up front. Also I tried customer support...
Ok the issue I am addressing is that the audio sample rate when exporting is at 8khz by default. Which to my knowledge has NO relevant use what so ever. Even when I set the file format to h.264 it insists on resetting to 8khz. Even if I manually set everything look at the render queue and click on output module again it changes the sample rate back to 8 khz automatically which I must adjust again. Why can it not just be set at 48000 like every other adobe product is and like it used to be two weeks ago.
how to change the frame rate of an imported video in the working animation timeline box.
It automatically imports them as like 33 frames a second.
This is in CS3.
So every time I try to change my layer replace like this (200ms) (replace) in the name field, it makes no difference when i open the image up like in chrome or anything. I also change it when I export it to default value to use for all frames, and nothing comes out of it.
View 2 Replies View RelatedI have a Quicktime render of a project I made a few months ago that was originally created at 23.976 FPS.
I now need to prepare this Quicktime render for digital projection in a movie theater -- the file I need to give my client has to be 24 FPS progressive.
I'd like to try and convert my Quicktime and audio without going back to the project itself, as this is a complex project and would take a really long time to re-render at 24 FPS.
Best method to convert my 23.976 Quicktime movie? Are there specialty plug-ins I should look into?
I imported a video layer from file then set the frame rate to 12fps, when I play the video it keeps changing the frame rate to random times. How do I keep it at 12fps?
View 6 Replies View Relatedhow to change frame rate. I have a images 59.94 fps in the edit desk, i want to change to 23.976 fps
View 1 Replies View RelatedI tried using the frame rate tool and it does convert the frame rate to 25 fps but the length of the clip (in this case it should be :15) isn't changing. I'm not sure what the correct workflow would be in Smoke to do this conversion.
View 1 Replies View RelatedWindows 7 64bit
i7 -3770 @ 3.40
GeForce GTX 550 Ti
16gigs ram
SSD Primary drive
**********************************
Since running x6 my system takes an unrealistic time to refresh graphics. I am working with a simple file and it takes 3 to four seconds to refresh after zooming in. My processor on CPU and Video card barely take a 20% hit.
Is Corel not setup to use the resources available? Is there some sort of Mad Hatter trick to fix it?
Here is a shot of the file I am working on after a fresh restart.
I shot some clips on my sony cyber shot camera (its about 2 years old so the content is not in HD). the clips are in .mpg format
i'm using the trial version for corel videopro x3 -. when i try to trim the clip, the output is not as good as the original clip. Why would this be ?
i selected the "same as project settings" option when creating the file. is there some other option i should choose ?
or is this because i'm using a trial version ?
i used to edit my clips in windows movie maker and it irrespective of whatever editing i would do, the clip quality would be exactly the same as that of the source clip.
I have VideoStudio SE, packaged with Sabrent USB-AVCPT cables. I was able to capture video for a while. Now when I try I get the following message. "Capture video bit rate is 300. Frame size is 640 X 480. When using this frame size the video bit rate should be between 1578 - 8838."
View 5 Replies View Related"AVI animation frame rate control You can now set the AVI frame rate of exported animations, and the animation preview window now has thumb track control on a timeline."
View 3 Replies View RelatedExporting 25fps QTs using H264 1080i (10mbit) settings produces quick times that jump at the start and have strange frame rates (20.7 and 25.17).
View 5 Replies View RelatedWhen I start a new project, it give me no frame rate option, beside what i see in the .cfg folder. How to i set a frame rate of 29 but with a custom resolution size ?
View 1 Replies View RelatedI have been unable to change the frame delay rate using Photoshop Elements 9 on Mac when trying to create animated gifs. Does it work on later editions of Elements?
View 5 Replies View RelatedI have some video in mpg format I'm trying to split into scenes, and then save off a separate videos. When I try to save one of the trimmed scenes using "Save trimmed video," I get the error: "Unable to compress video with the specific frame rate or frame size." It's all set in 16:9, and it's all set to 29fps, etc.
View 4 Replies View RelatedI'm trying to import some clips from Avid and the clips are playing back too fast.
In Avid, the clips originated as HDV 1440x1080i 59.94 fps. I transcoded them to DVCPro 1920x1080i 59.94fps. I exported the clips from Avid using "same as source."
In Smoke, I went through the library to select and import the clips. My Smoke Cfg settings are:
30i 1280x720@5994p, project settings 1280x720.
The clips playback as if they are running at 120% (best estimate).
in the Cfg template there are settings that are similar, such as 30i 1280x720@5994p and 1280x720@5994p. Is the "30i" for interlaced footage (ie HDV and uprezed SD)?
Smoke 2012 SAP SP1
Mac 10.6.7
Have reinstalled Premiere Pro 6.0.5 because I cannot drag Audio Transitions or Effects to any Timeline sequences in my Projects. Have tried modifier keys, but to no avail.
View 1 Replies View RelatedWhat is the point of Xrefs in 3ds Max if disabling the Xref does nothing to improve performance? Apparently everything in the disabled Xref is still calculated, because my viewport performance is crap. So I am reduced to deleting the Xref entry completely in order to get an acceptable interactive frame rate. This defeats the purpose of Xrefs. I might as well just Merge objects in and delete them when they're not needed.
This is 2013, I thought this sort of thing would have been dealt with properly by now. If the Xref is disabled, that means I don't want it to use ANY CPU time or ANY memory. As it stands, the value of Xrefs in 3ds Max is dubious at best.
I've have saved a video/photo project that also has several audio tracks. These tracks all seem to be at different audio levels. Is there an easy way of adjusting them all so they will play at similar level ? Or do I have to go into each one and rely on my ears to get them to sound about the same?
View 8 Replies View RelatedI'm using Preimer Pro CC and I have a clip which is 1min long - I want the first 30sec to play at normal speed and the last 30sec at 200%. I can work out how to speed the whole clip up but not a portion of it.
View 2 Replies View RelatedI've copied a segment of my video that I want to have run again at the end of my clip. In the duplicate part, I want to have the audio sound slower and, even more importantly, deeper (almost sinister) to acheive the effect I'm looking for.
I've seen a VS Pro X3-produced clip with this effect but I can't figure out how to do it. I've only been able to slow the overall clip. To get the deep sound I want it would have to be slowed WAY to much.
how I can slow down the audio fade in and out in VS X5? It seems to be a fixed function, am I wrong? I'd really like to slow down one particular audio clip so it fades in and out more slow but I don't know how!
View 1 Replies View Related