"AVI animation frame rate control You can now set the AVI frame rate of exported animations, and the animation preview window now has thumb track control on a timeline."
View 3 RepliesI create animated gifs frequently using the Frame Animation pallet. The default frame rate starts out as 10 seconds, so I always have to change it to 4 seconds. Is there anyway to reset the default frame rate that I start out with to 4 seconds, so that I don't have to change it every time?
Preferences did not yield any promising menus
I know the standard default reset with many Adobe products is to change it without a document open, but in PS CS5.5 if you do not have a document open the frame rate option is greyed out
______________
CS5.5
MacPro Tower
Mac OS 10.8.2
how to change the frame rate of an imported video in the working animation timeline box.
It automatically imports them as like 33 frames a second.
This is in CS3.
I cannot find that feathering control bar.
When I go to windows, control bars, and check it, nothing comes into view. So I assume it's out of my view...how do I get it back?!
what does it depends that how many control points are on an object in Designer Pro as default?
For example in Shape Tool creating a horizontal line (click and somewhere beside CTRL - click), at me it creates control points at the end of the lines plus two ones on the line.
That is super anyway because immediately can be seen where is the 33% of the line length, but could be set somehow this that how many control point should be as default?
I've been trying to figure out if it's an object naming thing, or is there a way to not pause between loops?
View 3 Replies View Relatedhow to convert a frame into an empty text frame using a macro?
View 1 Replies View RelatedI use this software to extract some graphics and animations. But when i export an animation to .gif it slow down. So, i export each frame to .bmp. I open in photoshop all the .bmp, create an animation, but when i export it...yeah the same problem... the .gif is slower.
I record a video as an example. [URL] ..........
I don't know why this happens.
Note: This is an example. This happens with almost animated gifs i create with photoshop. I use Photoshop CS5.5)
Is it possible to set PAL as default Frame Rate?
I tried MaxStart.max way, but it doesn't work (I created a new file with PAL frame rate and saved it as MaxStart.max into 3ds Max folder root)
So every time I try to change my layer replace like this (200ms) (replace) in the name field, it makes no difference when i open the image up like in chrome or anything. I also change it when I export it to default value to use for all frames, and nothing comes out of it.
View 2 Replies View RelatedI need to do a frame rate conversion and interlace of 24P to 29.97 interlaced for inclusion into A 29.97 timeline.
I'm on Win 7 and CS6.
Is any plugin required with CS6?
Or, can After Effects do it alone?
If a plugin is required, what is the best one for quality?
Or what stand-alone utility is most highly recommended? I thought I'd read on a Google search that Twixtor or "Magic Bullet" by Red Giant. I just spoke to Red Giant and they said they have nothing that does this.
I have a Quicktime render of a project I made a few months ago that was originally created at 23.976 FPS.
I now need to prepare this Quicktime render for digital projection in a movie theater -- the file I need to give my client has to be 24 FPS progressive.
I'd like to try and convert my Quicktime and audio without going back to the project itself, as this is a complex project and would take a really long time to re-render at 24 FPS.
Best method to convert my 23.976 Quicktime movie? Are there specialty plug-ins I should look into?
I imported a video layer from file then set the frame rate to 12fps, when I play the video it keeps changing the frame rate to random times. How do I keep it at 12fps?
View 6 Replies View RelatedI am using VS ProX5. While capturing the video captures normally for a few seconds and then stucks and moves slowly with one or two frames per second and the audio is very choppy.
Other video clips in my PC plays OK in VS.
I am capturing from my Panasonic digital camera through firewire cable/port to my Windows XP PC.
It used to work properly and for the past few months it is giving problem and I left it from there.
how to change frame rate. I have a images 59.94 fps in the edit desk, i want to change to 23.976 fps
View 1 Replies View RelatedI tried using the frame rate tool and it does convert the frame rate to 25 fps but the length of the clip (in this case it should be :15) isn't changing. I'm not sure what the correct workflow would be in Smoke to do this conversion.
View 1 Replies View RelatedI need to slow down a clip of video from its original frame rate. The original video is a piece of CCTV footage and is timelapse with a frame rate of 3fps and a total duration of 22 secs. I need to slow this footage down to create a slomo clip. can this be done in CS5ext?
View 8 Replies View RelatedI shot some clips on my sony cyber shot camera (its about 2 years old so the content is not in HD). the clips are in .mpg format
i'm using the trial version for corel videopro x3 -. when i try to trim the clip, the output is not as good as the original clip. Why would this be ?
i selected the "same as project settings" option when creating the file. is there some other option i should choose ?
or is this because i'm using a trial version ?
i used to edit my clips in windows movie maker and it irrespective of whatever editing i would do, the clip quality would be exactly the same as that of the source clip.
I have VideoStudio SE, packaged with Sabrent USB-AVCPT cables. I was able to capture video for a while. Now when I try I get the following message. "Capture video bit rate is 300. Frame size is 640 X 480. When using this frame size the video bit rate should be between 1578 - 8838."
View 5 Replies View RelatedI was having trouble with my video being too slow (Nikon d5300 recording at 1920x1080 and 60i frame rate) and I changed it from 59.94 to 29.97 and it corrected my video but now my audio is too slow. What can I change now to fix audio so that the video stays corrected?
View 22 Replies View RelatedExporting 25fps QTs using H264 1080i (10mbit) settings produces quick times that jump at the start and have strange frame rates (20.7 and 25.17).
View 5 Replies View RelatedWhen I start a new project, it give me no frame rate option, beside what i see in the .cfg folder. How to i set a frame rate of 29 but with a custom resolution size ?
View 1 Replies View RelatedI have been unable to change the frame delay rate using Photoshop Elements 9 on Mac when trying to create animated gifs. Does it work on later editions of Elements?
View 5 Replies View RelatedI have some video in mpg format I'm trying to split into scenes, and then save off a separate videos. When I try to save one of the trimmed scenes using "Save trimmed video," I get the error: "Unable to compress video with the specific frame rate or frame size." It's all set in 16:9, and it's all set to 29fps, etc.
View 4 Replies View RelatedI'm trying to import some clips from Avid and the clips are playing back too fast.
In Avid, the clips originated as HDV 1440x1080i 59.94 fps. I transcoded them to DVCPro 1920x1080i 59.94fps. I exported the clips from Avid using "same as source."
In Smoke, I went through the library to select and import the clips. My Smoke Cfg settings are:
30i 1280x720@5994p, project settings 1280x720.
The clips playback as if they are running at 120% (best estimate).
in the Cfg template there are settings that are similar, such as 30i 1280x720@5994p and 1280x720@5994p. Is the "30i" for interlaced footage (ie HDV and uprezed SD)?
Smoke 2012 SAP SP1
Mac 10.6.7
What is the point of Xrefs in 3ds Max if disabling the Xref does nothing to improve performance? Apparently everything in the disabled Xref is still calculated, because my viewport performance is crap. So I am reduced to deleting the Xref entry completely in order to get an acceptable interactive frame rate. This defeats the purpose of Xrefs. I might as well just Merge objects in and delete them when they're not needed.
This is 2013, I thought this sort of thing would have been dealt with properly by now. If the Xref is disabled, that means I don't want it to use ANY CPU time or ANY memory. As it stands, the value of Xrefs in 3ds Max is dubious at best.
I'm trying to animate a moving rope based on simulation data. I know how to import my motion data for individual objects.I've seen lots of tutorials where one uses simulations or soft bodies with IK in order to create a rope. how to use all these features and I want the rope to follow my coordinates exactly. I was hoping I could do something like the following:
1. create points in Maya which correspond to my data points
2. connect the points with a curve
3. loft a circle using the curve as a path in order to make a rope
4. move the points. due to History, the rope position is updated
Is there a way to do something like this in Maya? I've tried, and it looks like ep points do not have key-able channel data, so I can't create animations for them separately. I'm using .mov data file imports to generate x, y, and z motion keys for the points.
When we export a DES to WMF with embedded bitmaps in the source document and using the VB macro call ExportEx(), the bitmaps are saved as .BMP files. We would prefer to have the embedded bitmaps saved as JPG files.
And I am not a VB programmer so a few sample code lines would say a lot.
I just bought Designer Pro 7 and I was wondering if the following plugins will work with it and how do I get them into the program:
Alien Skin Xenofex 2
Eye Candy 4000
I'm just learning the program (upgraded from Xtreme 5 Pro).
My 59-year old eyes mutinied on the dark skin of Designer Pro 6. how to change the settings back to the original light-gray theme.
If I upgrade to 7 is the same option available? How would I do it?
What is the easiest way to open/import SVG files in Xara Designer Pro?
It's funny you can export as SVG but I cannot find SVG format when importing graphics.
My current workaround is to open SVG files in Illustrator, select, copy, jump over to Xara and paste as enhanced metafile. But what if I don't have Illustrator?