I cannot find that feathering control bar.
When I go to windows, control bars, and check it, nothing comes into view. So I assume it's out of my view...how do I get it back?!
what does it depends that how many control points are on an object in Designer Pro as default?
For example in Shape Tool creating a horizontal line (click and somewhere beside CTRL - click), at me it creates control points at the end of the lines plus two ones on the line.
That is super anyway because immediately can be seen where is the 33% of the line length, but could be set somehow this that how many control point should be as default?
"AVI animation frame rate control You can now set the AVI frame rate of exported animations, and the animation preview window now has thumb track control on a timeline."
View 3 Replies View RelatedWhen we export a DES to WMF with embedded bitmaps in the source document and using the VB macro call ExportEx(), the bitmaps are saved as .BMP files. We would prefer to have the embedded bitmaps saved as JPG files.
And I am not a VB programmer so a few sample code lines would say a lot.
I just bought Designer Pro 7 and I was wondering if the following plugins will work with it and how do I get them into the program:
Alien Skin Xenofex 2
Eye Candy 4000
I'm just learning the program (upgraded from Xtreme 5 Pro).
My 59-year old eyes mutinied on the dark skin of Designer Pro 6. how to change the settings back to the original light-gray theme.
If I upgrade to 7 is the same option available? How would I do it?
What is the easiest way to open/import SVG files in Xara Designer Pro?
It's funny you can export as SVG but I cannot find SVG format when importing graphics.
My current workaround is to open SVG files in Illustrator, select, copy, jump over to Xara and paste as enhanced metafile. But what if I don't have Illustrator?
When ever I export to PDF from Designer Pro 7 a graphic ends up in the PDF file that isn't any where in the Xara doc. It happens on most files exported from Xara but not all. It also happens on both my laptop and my desktop PC. I'm pretty sure it used to happen in WD6 so it may stem from there.
I've attached a PDF exportd from Xara, you shouild hopefully see two black.. um.. cartoonish feet / foot prints. God knows where they came from, I must have imported them at somepoint. You should also notice they only appear on the first page of a document.
I've tried searching for just outlines in Designer pro but nothing.
Is there an .INI file or cache file I can clear?
I haven't tried a re-install yet as it happens on two PC's so can't see it being that.
does the new xarapro have a linked feature for placing 300 dpi images into a 50-60 pages? If not, is it even possible to have that many pages with those numbers of large size pictures? Just wanted to know if others have done such a thing. Also if possible, can a large document be divided into number of xara files and then exported as pdf and put together in adobe acrobat to make a large output for printers?
View 6 Replies View RelatedI noticed that when exporting a trifold to PDF, that a transparent PNG file contained in the design, actually has an opaque background, not transparent. I have used Commercial Printing as the export mode and played a little with custom settings.
View 7 Replies View RelatedIn first place, I wanted to know if there's a way to import dxf in Xara Designer pro 7 ?
View 3 Replies View RelatedIf I type some text, then select the 'Selector Tool', then use the middle 'bounds handles' to resize.I would expect the text to be stretched.But, what I get is resizing in both horizontal and vertical directions. As if I was using the corner 'bounds handles'.
It works as I would expect in Designer Pro X.Is there a setting I've missed somewhere?
When I make a brush how can I save it for other projects. I have tried saving it with a template but it is gone next time I open the template.
View 5 Replies View Relatedi am just testing Designer Pro X 9 (have Pro X) and when trying to locate PS Plugin folder, i get the window "currently no 64Bit (8bf) support" "choose the 32Bit Version". I have Av. Bros. plugins, which are also available in 64 Bit.
View 9 Replies View RelatedIf you want the blue look on your Designer Pro X9 icons!
EDIT: In case it's not clear. Both icons are in the zip file.
how do you change the tool bar buttons to small buttons? The options are all greyed out! I am old but not that blind yet. This is a work stoppage, and abandon software problem for me.
View 9 Replies View Relatedi am getting new operating system and unregister Xara from old Windows, and reinstall it in new Windows 7.
View 3 Replies View RelatedI noticed that animated gif that I put into other web builders load fine, show cleanly.Yet when put into XDP6, the same graphics get a ghosting effect.In other words, after letters have cleared the screen, a remaining unintended outline remains. The graphics are clean in previews, viewing directly, using other web builders, or on other sites built with other software.
Today I visited the New Features page for X3D7 and had the same issue with the gif on that page too. (attached screenshot for reference)I am using win7/64bit, 8gb ram, hi-speed internet connection, don't have anything set in the browser and no browser "helper" that is adjusting image quality. This problem is only seen in Internet Explorer, not Firefox.Is there a setting in XDP that needs to be adjusted so this doesn't happen?
I still want the web stuff ripped out.Easy, delete the HTMLfilter.dll and remove the web related buttons from the tool bars.
View 9 Replies View RelatedI am wanting to use XDP as a desktop publisher and can't see any hints on table creation. There are lots of other useful word processing functions but not tables AFAICS.
View 9 Replies View RelatedI've created 3 separate files in Designer Pro 6; haven't been able to figure out how to merge them.
View 4 Replies View RelatedWhen I try to run Xara Designer Pro 7 I get a window popup that tell me "The program could not be started. It's possible that the installation folder is damaged." with the error code: -6
No matter what I try I get that error. I tried with a new doawnloaded file, with the file from the CD, after to have removed files on the Intel SSD or hard drives, and keys in the registry (but maybe i missed some!). I also tried with or without system protections/firewall/antivirus as well with or without administrator rights.
My system is Windows 7 64 bits with Xara designer pro 7.1.1.
I exported a swf file to my computer, which i made with Xara designer 10. I would like to re-edit the file but don't know how to open it again in Xara.How do I do that?
View 7 Replies View RelatedIf I create a logo in Xara Designer Pro 6.0, is that vector? Can I scale it up as large as I want?
View 3 Replies View RelatedI have just upgraded to P&G Designer7 from Xara Xtreme 3.I had problems ungrouping layers.Maybe others have experienced the same difficulty.
Grouping layers is easy, of course. Shortcut CTRL+G, moves all parts to just one layer.
Ungrouping is not so easy.CTRL+U does NOT revert things to your previous multiple layers.If you've saved saved your file, next time you have to tediously re-create all your previous layers from scratch.CTRL+Z does revert to multiple layers, just as long as you haven't already saved the document.
Designer Pro is an excellent program for digital scrapbooking, with it's all in one abilities everything a digital scrapbooker needs is right here! Even the web design features are very useful for creating complete albums that you can share online or privately with friends or family.
XDP comes with a few nice scrapbook sets, and adding stuff you may already have or stuff you find from some of the many scrapbooking sites around the web is as simple as adding folders to your designs gallery for papers, embellishments alphabets, and word art.
I'm thinking of doing a regular scrap booking posting (I'm not sure yet how often, it will depend on my schedule and interest in the topic) some of the things that I may post will be tips, short tutorials, and Freebies!
For today I have a quick and simple layout template for you. Simply select the photo object in the center and drag and drop your photo file right into the layout. The background "paper" is simply a rectangle with a seamless tile that I created in just a couple of mins. The heading is a simple layered effect that is soft grouped so you can easily change the text and even the font. The embellishments are just a few photo clipart objects from one of the sets that comes with Designer Pro.
Can Xara Designer open eps or ai files?
View 6 Replies View RelatedHow do I add those CD fills to the gallery? I noticed they are all stored in a cab file with their file extensions a bit changed, so I guess I could mass rename them and add manually, but I was wondering if there is any clean way of doing it? I don't want to reinstall, because I want to keep my toolbars and other settings...
...which brings me to my second question... how do I save the layout I created? I know new version is about to be released, and I would like to be able to back the layout up somehow and import, so I don't have to go through it all manually again. Anything I can do about it? I already tried backing up the entire xara registry, but didn't work...
how to use Photo and Graphics Designer 2013.
View 6 Replies View RelatedI'm putting the finishing touches on a painting I've been working on using PSE4 and Xara Pro 7, and I've run into a problem: Xara won't open the image. The image is in TIFF. The error code I get is this: 0ee3d87d-4061-4c60-ad08-89d82ea87ffc. I've been able to open previous versions of the image in Xara. This image has a lot more detail, so I wonder if file size is this issue?
View 5 Replies View RelatedLanguage selection The menu shown when you click on the Spell Checker icon on the infobar lists all the languages for which you have dictionaries installed. By default the language corresponding to the current locale setting is selected
i have win 7 french with everything in french, yet xara only offers me english (uk) and english (us) as spellchecker language options
How i can add french? is there a registry key i can edit?