CorelDRAW Graphics Suite X6 :: Screen Redraw Rate Real Slow?
Sep 11, 2013
Windows 7 64bit
i7 -3770 @ 3.40
GeForce GTX 550 Ti
16gigs ram
SSD Primary drive
**********************************
Since running x6 my system takes an unrealistic time to refresh graphics. I am working with a simple file and it takes 3 to four seconds to refresh after zooming in. My processor on CPU and Video card barely take a 20% hit.
Is Corel not setup to use the resources available? Is there some sort of Mad Hatter trick to fix it?
Here is a shot of the file I am working on after a fresh restart.
I used X3 on a very low grade business computer at my last job and it worked flawlessly, now I have a stacked HP system with X4 and it runs doggie. I notice it most when cropping bitmaps with the node edit tool. I will get an hour glass (blue ring) when I do this.
When I open a file it takes about 3 to 10 min, even more. I make rubber stamps so my files contain circles with text fitted on it and no more than 10 rubber stamps models.
I reinstalled Corel Suite but no hope.
If I create a new file, draw a rectangle (or a rubber stamp) and save it, the next time this file opens instantly. If I open an old file, after finally opens, I delete everything in it and save it, the next time it will take several minutes to open. Also, the empty file is about 700 KB long, comparing to a new empty file which is about 12 KB long.
The Corel stuff no longer supports Corel 12 (even if I've seen the same problem on other forums, reported for higher versions, with no real solution).
NB: Old files are the files created before reinstalling Corel Suite; and they are a lot
I upgraded my Corel Draw to X6 version about 3 months ago. It worked perfect until a few days ago, since in started to freeze when doing simple operations as copying a vector image or a text or exporting a document (for example a vector image to .png or .pdf)
The funny part is that we have two computers in our office with Corel installed, and both of them have the same problem. We checked with our IT department, did all the upgrades to Corel and Windows, did a repair to Corel, and still, same problem.
We purcased X6 and installed on 3 PC. two are Windows XP and one has Windows 8 operating system.
X6 work fine and fast on Windows 8 system.
But both X6 on both Windows XP are nightmare. Just creating new document can take up to 10 sec. Printing is also very slow, but exporting simple JPG file knock-me down. It take half minute or more...
Previous we worked many year's with X4 on same PC's, now we format PC's, Install Windows XP with all service pack's and updates, reboot machine and install X6.
It is not possible to install Windows 8 on those two PC's, because they drive two machines, that only support Windows XP...
So since we installed CorelDraw x6 the one file we have been working on is a long text file and it slowes every thing down drasticly.We did think updating would work so we did that and it still lags.
the speed of cutting and pasting, as well as saving a drawing in CorelDraw X5 has drastically slowed down.Could it be a Windows issue and not a Corel issue? I have plenty of RAM and I've defragged.
CorelDRAW X6 has been lovely and fast for me these last few months but the reason I quit Corel for a number of years was that, after a while it seemed to slow down. Now, suddenly, when I save a file of exit the program freezes for approx 35 seconds before finally closing. It makes no difference where I save the file (on my SSD C Drive or elsewhere). I have a 6 core, 32gb RAM etc and, as I was saying, it worked until today but suddenly this.
I have just upgraded from X3 to X5. In X3 when I would type some text I would then scroll through the different fonts and see which one I wanted to use. This was really quick. I simply cursored down through the list. X5 is very slow in changing from one font to the next. I'm having to match and select fonts in X3 and then paste them into X5 and continue my artwork.
Have recently upgraded to corel 11, from 9, but at the same time upgraded my computer.
When I try to plot a simple circle shape on my Roland CM24 the image cuts twice and is extremely slow (juddering).
I believe the double cut is caused by the hairline & fill but messing around have only gone from double cutting each shape individually to do double cutting the whole image.
I have recently installed Corel X6 and have found it to be painfully slow when opening files. At first I had thought it might be a network issue so I copied the file to a local drive and experienced the same problem.
The file is only 819Kb but it takes about 3 minutes to open the file. When I first select the file in the File Open dialogue window Corel just hangs for about 1 minute. It finally responds then takes a further 2 minutes to process and open the file.
I have turned off my antivirus software as I thought this might be a file scanning issue but still the same result.
I am using corel X6 64 on a Dell optiplex 9010 intel(R) Core(TM) i7-3770 @ 3.40GHz 3.40 GHz. 8.00GB of RAM. Its taking about 1-2 minutes to copy/cut/open a file/save a file or even publish to PDF. On the same machine Same circumstances but different User i have no problem. I have to use my user because its connected to my email and at this company i cant change that. I have researched many forums and its not color styles or object styles. It does it on a new file with only one object created. I got a new computer signed on to my user account and the problem persists.
After fairly smooth sailing for using X6 I ran into a problem that's caused me to switch back to X5 for the time being :(
I work in files that have thousands of individual characters in them. In X5 if I wanted to change the color of about 10,000 individual characters it would take about 3 seconds to do so. If I do the same thing in X6 I takes at least 30 minutes (or longer, I just killed it by that time).
Working with large amount of texts is incredibly slow X6, not just 5 or 10% or slower, doing somethings takes up to 10x times as long.....
I know there is a lot of features for text in X6 but this decrease in speed puts a complete block in my workflow. Maybe Corel could have a feature that individual text characters have minimal properties associated with them or something?
Here are my specs:
windows 7 64bit with office 2010 installed Intel(R) Core(TM) i7-2600K CPU @ 3.40GHz NVIDIA Quadro 4000 16.0 GB ram
slow copy to clipboard? I have pinned it down to my virus protection. I use McAfee and I notice that my CPU goes up considerably when I do a copy to clipboard under mcshield.exe. When I turn off the McAfee, copy to clipboard in X6 works fast and perfectly.
I installed Corel Draw 12 on a new machine with Vista HP, and I cannot git rid of the registration nag screen. I lost my registration info a long time ago, and have tried the "never register" option, but the nag screen keeps coming up.
I'm trying to uninstall X5 to install it again. Because when I try and any of the programs connected to it I get blank screens. I'm completely dumbfounded.. When I click on it to "UNINSTALL" I also get the green bar for about 2 seconds, but the box is completely blank. No buttons or anything.
I opened my CorelDRAW X3 to find that the colours on screen look corrupted.
I use the "Optimised for professional output setting" in Colour Management which I never change.
Now, rather than looking fairly close to printed colours, they look very bright... too bright! (see screen shot)
I think that i have had this problem before and i ended up uninstalling and reinstalling. I would like to avoid this if i can as have have a lot of custom settings that i would have to re-do.
I’d like to copy an object a distance that I specify on screen. I can see how to copy a specified number of inches, but that is very awkward. You have to measure the distance (horizontal and vertical) and then input the numbers, then click “apply”. Is there a simpler way to do it?
Or is there a way to paste at a specified location? If I do an Edit>Copy then Edit>Paste, it pastes the new object on top of the old one.
I suspect that there is no way to do this, but it seemed so logical....How can I rotate the actual view of a page in DRAW? I have these box designs that I get handed, done somewhere else on the planet, with changes to various panels that are shown as upside down or at 90 degrees to the original page. I have to squint and cough backwards to read them.
Of course, for text, I can do an edit, but usually the text has been converted to curves many revisions ago. I looked, but could find no option for simply rotating the view, which would solve the problem.Surely there is a view "object" that gets filtered through the various existing View options, meaning that a simple set of transforms should also be able to rotate the entire pageview.
I do know how to kludge it, by selecting ALL and then rotating everything around a center point, but it requires than everything be selectable, and I use layers a LOT, for keeping the background frozen, for example. So, to get to a simple view of a small section on some sideways box tab, I have to unlock everything, select everything, rotate, edit, and then rotate back again and relock all the locked layers. It would make life simpler to have rotation as an option in View. Unless there's a better way???(And, no, the monitor is even harder to twist around.)
after installing the update to 6.2 on my spare system coreldraw just starts with it's welcome screen in any browser (standard-browser: ie, firefox or chrome) instead of corel itself. therefore i can't work with coreldraw anymore - even cannot close it. have to kill process in task-manager.
no uninstalling possible because of the same failure: uninstall opens a browser. so no uninstall possible.
no new installation from dvd possible, because the installer also opens an browser-window instead of an installer.
When you open the welcome screen and you choose "New from Template" the welcome screen in the background is missing the left side of the welcome screen.
And when you close the "new from template" window, it stays missing and you cannot choose any of your recent "open documents".
Well as much as I do design work for customers for tee shirts,I never had to do color separation, for the screens.I’m wondering how do you do this? ( how do you separate colors in corel, for screen printing) .
how to work cereldraw x3 i was going fine with all my work then it just went white when i tried to do something not sure what and now i dont know how to get it back to normal i cans elect my work but cant see any of it
I've been using these two programs for some time with no problem. I recently upgraded some of my adobe software and now when I try to open CorelDRAW of Photopaint, there is no welcome screen anymore and I can't click on anything.
Is there something conflicting with the welcome screen (flash or something that the welcome screen uses) that perhaps was installed with one of the adobe products, maybe? Not sure if it matters but I updated adobe dreamweaver and fireworks.Both programs are unusable now with this loading problem.
I am interested to know why with Corel Draw the quality of many of my images and text looks very poor on the screen, but when I publish to PDF they are how they should be. Is there any way of changing this so I see on the screen what the real quality looks like?
