CorelDRAW Graphics Suite X6 :: Working Slow On Windows XP?
Nov 11, 2013
We purcased X6 and installed on 3 PC. two are Windows XP and one has Windows 8 operating system.
X6 work fine and fast on Windows 8 system.
But both X6 on both Windows XP are nightmare. Just creating new document can take up to 10 sec. Printing is also very slow, but exporting simple JPG file knock-me down. It take half minute or more...
Previous we worked many year's with X4 on same PC's, now we format PC's, Install Windows XP with all service pack's and updates, reboot machine and install X6.
It is not possible to install Windows 8 on those two PC's, because they drive two machines, that only support Windows XP...
I upgraded my Corel Draw to X6 version about 3 months ago. It worked perfect until a few days ago, since in started to freeze when doing simple operations as copying a vector image or a text or exporting a document (for example a vector image to .png or .pdf)
The funny part is that we have two computers in our office with Corel installed, and both of them have the same problem. We checked with our IT department, did all the upgrades to Corel and Windows, did a repair to Corel, and still, same problem.
There were some patches available at one time but I'm not able to find them anymore. I have recently installed X3 on a W7 machine and have so far found everything to work fine except for an issue of half of my fonts being blank when trying to choose one from the drop down menu. Existing files with these blank fonts also come up with the fonts completely missing as if the entire set of words was deleted. Here is the list of patches that I've heard is necessary for X3 to be compatible with W7...
Below is a message from an older post:
I too have CorelDraw X3 on a Windows 7 machine, in order to get the best from it you will need to visit Corel's website [URL] and install the following patches Service Packs and patches in this order, re-start after each:1. CGSX3 Hot Patch1.exe2. CGSX3SP1.msp3. CGSX3SP2.msp4. Font Nav Fix.msp .. which will fix the problem with the Fontsand then run the program in Compatibility Mode with Windows XP+SP2
I used X3 on a very low grade business computer at my last job and it worked flawlessly, now I have a stacked HP system with X4 and it runs doggie. I notice it most when cropping bitmaps with the node edit tool. I will get an hour glass (blue ring) when I do this.
When I open a file it takes about 3 to 10 min, even more. I make rubber stamps so my files contain circles with text fitted on it and no more than 10 rubber stamps models.
I reinstalled Corel Suite but no hope.
If I create a new file, draw a rectangle (or a rubber stamp) and save it, the next time this file opens instantly. If I open an old file, after finally opens, I delete everything in it and save it, the next time it will take several minutes to open. Also, the empty file is about 700 KB long, comparing to a new empty file which is about 12 KB long.
The Corel stuff no longer supports Corel 12 (even if I've seen the same problem on other forums, reported for higher versions, with no real solution).
NB: Old files are the files created before reinstalling Corel Suite; and they are a lot
So since we installed CorelDraw x6 the one file we have been working on is a long text file and it slowes every thing down drasticly.We did think updating would work so we did that and it still lags.
the speed of cutting and pasting, as well as saving a drawing in CorelDraw X5 has drastically slowed down.Could it be a Windows issue and not a Corel issue? I have plenty of RAM and I've defragged.
CorelDRAW X6 has been lovely and fast for me these last few months but the reason I quit Corel for a number of years was that, after a while it seemed to slow down. Now, suddenly, when I save a file of exit the program freezes for approx 35 seconds before finally closing. It makes no difference where I save the file (on my SSD C Drive or elsewhere). I have a 6 core, 32gb RAM etc and, as I was saying, it worked until today but suddenly this.
I have just upgraded from X3 to X5. In X3 when I would type some text I would then scroll through the different fonts and see which one I wanted to use. This was really quick. I simply cursored down through the list. X5 is very slow in changing from one font to the next. I'm having to match and select fonts in X3 and then paste them into X5 and continue my artwork.
Have recently upgraded to corel 11, from 9, but at the same time upgraded my computer.
When I try to plot a simple circle shape on my Roland CM24 the image cuts twice and is extremely slow (juddering).
I believe the double cut is caused by the hairline & fill but messing around have only gone from double cutting each shape individually to do double cutting the whole image.
I have recently installed Corel X6 and have found it to be painfully slow when opening files. At first I had thought it might be a network issue so I copied the file to a local drive and experienced the same problem.
The file is only 819Kb but it takes about 3 minutes to open the file. When I first select the file in the File Open dialogue window Corel just hangs for about 1 minute. It finally responds then takes a further 2 minutes to process and open the file.
I have turned off my antivirus software as I thought this might be a file scanning issue but still the same result.
Windows 7 64bit i7 -3770 @ 3.40 GeForce GTX 550 Ti 16gigs ram SSD Primary drive **********************************
Since running x6 my system takes an unrealistic time to refresh graphics. I am working with a simple file and it takes 3 to four seconds to refresh after zooming in. My processor on CPU and Video card barely take a 20% hit.
Is Corel not setup to use the resources available? Is there some sort of Mad Hatter trick to fix it?
Here is a shot of the file I am working on after a fresh restart.
I am using corel X6 64 on a Dell optiplex 9010 intel(R) Core(TM) i7-3770 @ 3.40GHz 3.40 GHz. 8.00GB of RAM. Its taking about 1-2 minutes to copy/cut/open a file/save a file or even publish to PDF. On the same machine Same circumstances but different User i have no problem. I have to use my user because its connected to my email and at this company i cant change that. I have researched many forums and its not color styles or object styles. It does it on a new file with only one object created. I got a new computer signed on to my user account and the problem persists.
After fairly smooth sailing for using X6 I ran into a problem that's caused me to switch back to X5 for the time being :(
I work in files that have thousands of individual characters in them. In X5 if I wanted to change the color of about 10,000 individual characters it would take about 3 seconds to do so. If I do the same thing in X6 I takes at least 30 minutes (or longer, I just killed it by that time).
Working with large amount of texts is incredibly slow X6, not just 5 or 10% or slower, doing somethings takes up to 10x times as long.....
I know there is a lot of features for text in X6 but this decrease in speed puts a complete block in my workflow. Maybe Corel could have a feature that individual text characters have minimal properties associated with them or something?
Here are my specs:
windows 7 64bit with office 2010 installed Intel(R) Core(TM) i7-2600K CPU @ 3.40GHz NVIDIA Quadro 4000 16.0 GB ram
I have three MAC's using Parallels with Windows 7 X64 on a domain. I cannot get Corel Draw x5 to launch on one. It just simply crashes and records Failed to Release Mutex Error ID = Returned Error 288 & 1 in the event log. I have tried removing Corel Draw from the workstation 3x in combination with manual and automatic. I have spent over 8 hours on this and cannot find a solution on line. I have removed user settings as well. I have the original media. I have tried downloading another copy from CNET but the key will not work.
I have been having problems updating my Corel Draw 11 Graphics Suite for use on a computer running Windows 7 Pro, 64 bit. It worked fine on the previous computer I was using, which was running Windows XP Pro, 64 bit. I have been to the download site for all applicable patches and service packs for Corel 11, namely, SP1, SP2, Draw11SVGUpdate, and CGS11savefix.exe. When I run the SP1, I get an error message: "the file C:/Programfiles(x86)CorelCorelGraphics11FiltersCRLPDFImport110.dll is not a valid previous version and could not be upgraded" The only response choice I was offered was "OK" and this exits the setup.
When I try to open either Corel Draw 11 or Corel Photo Paint 11, I get the following message: "Corel PHOTO-PAINT(R) [or DRAW] has stopped working. A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available." The only "option" I'm given is to push the "Close program" toggle and exit. Windows has never contacted me via email to tell me of any solutions.
I have been using the Corel Draw Graphics Suite for many years - first buying the Full Version of CD5, then upgrading to 8, then upgrading to 11. I have the original "upgrade" discs for 11 which have installed just fine up to now, and I really do not need the extensive features of CGS X5 (which, by the way, works perfectly in the "trial download" form I put onto the computer in question!). I was SO hoping to get the updates on 11 installed so it will work on Win 7 Pro, rather than have to pay $200 for the upgrade to X5 "just" to gain the ability to run Corel DRAW and Corel PHOTO PAINT on this new computer. (By the way, that "just" is a relative term - if it's the only way to get a functioning program, I will have to upgrade - Corel DRAW and Corel PHOTO PAINT are the bedrock of our private printing press work!) Is there any way I can proceed with Corel 11?
CorelDRAW 12 successfully installed on a new machine running Windows 7 Professional 64-bit; however, when attempting to run the SP1 patch (CGS12SP1EN.msp), I get the following message:
"The wizard was interrupted before CorelDRAW Graphics Suite 12 could be completely installed."
I have tried "Corel Draw 12 and vista" which attempted to run the Microsoft installer through the command prompt running under Administrator, but it doesn't work.
am using windows 7 without aero windows. Twice when using Corel draw and saving the program has crashed. I have then had to ctrl alt delete and shut the program down.
I'm having 2 seperate import problems in Coreldraw X5 in Windows 7. The first one, and the one I need to fix immediatly is, every time I try to import a dfx file, the program crashes. The other which is less important right now is, a lot of times when I try to import PDF's I get an error message that says the file is corrupt.
im using coreldraw x5 since last year but recently when ive tried to open uniform fill tool (***+f11) the separate window isnt showing up. is as if it is invisible because i would have to press esc to continue back to my work. the only pop up window that does work is fountain fill (f11) the rest such as option (ctrl+j) doesnt pop up
When using Windows 7 (32 bit) and Coreldraw X5, when I zoom up the page, with grid on, and start moving TIFFs around, the grid disappears in that local area. The only option is to refresh the page. So just recently upgraded to Windows 7 64 bit, but no change.
Not to sound entirely ignorant ... but, where is the Corel program folder in Window 7 x64? I went to drive C (no other drives) and then programs folder ... no Corel folder?
I'm trying to get to the GMS folder to install macros...
I want to install ColorDRAW graphics X6 on an Windows 64 BIT computer.
We know that is officially not supported. But is there a workarround available ?If already tried to run in it in compatibility mode on an account with admin rights.That doesn't work.I get an error during the installation:Microsoft Visual Basic for applications 7.1 is not supported.
I have used Corel X3 on a XP & Vista machine with the Draw stitch Embroidery Effect plug-in. However, when I install it on Windows 7, the Embroidery Effect is not showing up in Corel, even thought both programs seemed to install successfully.
I must have tried installing CorelDRAW X5 a dozen times on Windows ultimate X64; but it wouldn't. I always get an "incomplete installation". At 58% and 62%, I get an "error 1721" message saying that there is a problem with the Windows installer package and it couldn't "register" or "unregister".