the speed of cutting and pasting, as well as saving a drawing in CorelDraw X5 has drastically slowed down.Could it be a Windows issue and not a Corel issue? I have plenty of RAM and I've defragged.
View 2 Replies
I am using corel X6 64 on a Dell optiplex 9010 intel(R) Core(TM) i7-3770 @ 3.40GHz 3.40 GHz. 8.00GB of RAM. Its taking about 1-2 minutes to copy/cut/open a file/save a file or even publish to PDF. On the same machine Same circumstances but different User i have no problem. I have to use my user because its connected to my email and at this company i cant change that. I have researched many forums and its not color styles or object styles. It does it on a new file with only one object created. I got a new computer signed on to my user account and the problem persists.
View 14 Replies View RelatedFor some reason i can no longer copy and paste text from one page to another properly.
I write the text out as normal (not using a text box) but when i copy and then try to past to another page it then does several other things.
It changes the font and cap height, puts it onto a text box and centres it on the page?
If i copy and paste text along with an object (say a simple box) everything copies and pastes perfectly, just not text on its own
I have a problem in trying to copy text from an existing multi column text box and pasting it into another existing text box. It just doesn't work. If I copy text from a single column text box into another text box, single or multi column, it does work.
The only was to copy text from a multi column text box is to use paste special which then creates a completely new single column text box and pastes the text there. I loose all the formatting.
I can then copy the text from the text box created by that paste special process and then copy that to where I want it to go, but of course I then have to reset all the formatting.
I'm using the latest version of Corel Draw X6 -this probem however seems to have been introduced in X6 as I've just open X5 on my system and the copy/paste functon works as it shoud.
For some time I was using CorelDraw 12 with Windows XP and Excel 2007.I normally make some tables in Excel which I copy and paste into Corel using "Paste special"/Picture/Enhanced Metafile. In Windows XP there was no problem. Since I switched to Windows 7, I have the following problems:
- The font Wingdings 3 comes out as Arial.
- The second problem is a very strange thing: Some characters, such as ,-"; , always at the END of the line, just dissapear. It happens sometimes, not always, and I can't see absolutely no logic in it: I copy the same thing, paste it several times, and sometimes the comma comes out, sometimes not. I remember that this happened to me ONCE, long time ago, when I was still using XP, but then I restarted Corel and it stopped making problems. But now, with Windows 7, it happens almost all the time. I tried it on a few different PCs and I even tried it with Corel X4. Always the same problem.
In my one file I am unable to do copy and past command in paragraph text mode in one particular paragraph text handle. Can't find the reason. But in same file with new artistic or paragraph text handle I can do copy and past.
View 3 Replies View Related1, the commands DO work if the text is confined to just ONE page, even if there are multiple linked text frames.
2, it's only the Copy command that doesn't work. Once copied, text does paste irrespective of the amount of text or linked pages.
And do I have to wait for 6.3 to get a resolution ? On Win 7, 64 bit
slow copy to clipboard? I have pinned it down to my virus protection. I use McAfee and I notice that my CPU goes up considerably when I do a copy to clipboard under mcshield.exe. When I turn off the McAfee, copy to clipboard in X6 works fast and perfectly.
View 3 Replies View Relatedwhen i write 8,45 it writes 8. i can't use decimals suddenly
View 9 Replies View RelatedCorelDRAW X5 suddenly does not launch. I click to launch it, but when the splash screen comes up, it stays stuck on "Loading User Settings". Doesn't go further than that.
View 7 Replies View RelatedSuddenly, CorelDraw X4 is not reading all my fonts properly. I can select them from the list in a document, but all I get is a box and no text in it. I am running XP on this machine.
View 13 Replies View RelatedI was working on a document and suddenly was unable to move selected objects! This was true on all 3 pages. I had not changed any settings. I could select objects but not move them.....In the Object Manager, all layers are visible and editable. Even Edit through layers is checked. And the working layer was red.
View 4 Replies View RelatedI am using CorelDraw Suite X5 on a Windows 7, 64-bit operating system. I always used x,y coordinates for positioning objects. Last week that option suddenly stopped working. Now when an object is highlighted the x,y coordinates always registers 0,0. If I try to re-position an object by putting in new coordinates, objects are placed way off the page. My inputs are not held and the coordinates are back to 0,0.
View 4 Replies View RelatedMy X4 cdr file starts to load and suddenly X4 shuts down instantaneously. Same with the backup. Can it be repaired?
View 14 Replies View RelatedIs there an updated copy of the macro Paste from AI anywhere to be found?
The one at Oberon is only for X4 but seemed to work in X5 but not X6.
CorelDraw X4 seems to run slow on my new system.
I used X3 on a very low grade business computer at my last job and it worked flawlessly, now I have a stacked HP system with X4 and it runs doggie. I notice it most when cropping bitmaps with the node edit tool. I will get an hour glass (blue ring) when I do this.
I have my memory allocation at 75%
When I open a file it takes about 3 to 10 min, even more. I make rubber stamps so my files contain circles with text fitted on it and no more than 10 rubber stamps models.
I reinstalled Corel Suite but no hope.
If I create a new file, draw a rectangle (or a rubber stamp) and save it, the next time this file opens instantly. If I open an old file, after finally opens, I delete everything in it and save it, the next time it will take several minutes to open. Also, the empty file is about 700 KB long, comparing to a new empty file which is about 12 KB long.
The Corel stuff no longer supports Corel 12 (even if I've seen the same problem on other forums, reported for higher versions, with no real solution).
NB: Old files are the files created before reinstalling Corel Suite; and they are a lot
I upgraded my Corel Draw to X6 version about 3 months ago. It worked perfect until a few days ago, since in started to freeze when doing simple operations as copying a vector image or a text or exporting a document (for example a vector image to .png or .pdf)
The funny part is that we have two computers in our office with Corel installed, and both of them have the same problem. We checked with our IT department, did all the upgrades to Corel and Windows, did a repair to Corel, and still, same problem.
We purcased X6 and installed on 3 PC. two are Windows XP and one has Windows 8 operating system.
X6 work fine and fast on Windows 8 system.
But both X6 on both Windows XP are nightmare. Just creating new document can take up to 10 sec. Printing is also very slow, but exporting simple JPG file knock-me down. It take half minute or more...
Previous we worked many year's with X4 on same PC's, now we format PC's, Install Windows XP with all service pack's and updates, reboot machine and install X6.
It is not possible to install Windows 8 on those two PC's, because they drive two machines, that only support Windows XP...
Windows XP are 32 bit, Windows 8 is 64 bit
So since we installed CorelDraw x6 the one file we have been working on is a long text file and it slowes every thing down drasticly.We did think updating would work so we did that and it still lags.
View 4 Replies View RelatedCorelDRAW X6 has been lovely and fast for me these last few months but the reason I quit Corel for a number of years was that, after a while it seemed to slow down. Now, suddenly, when I save a file of exit the program freezes for approx 35 seconds before finally closing. It makes no difference where I save the file (on my SSD C Drive or elsewhere). I have a 6 core, 32gb RAM etc and, as I was saying, it worked until today but suddenly this.
View 8 Replies View RelatedI have just upgraded from X3 to X5. In X3 when I would type some text I would then scroll through the different fonts and see which one I wanted to use. This was really quick. I simply cursored down through the list. X5 is very slow in changing from one font to the next. I'm having to match and select fonts in X3 and then paste them into X5 and continue my artwork.
View 4 Replies View RelatedHave recently upgraded to corel 11, from 9, but at the same time upgraded my computer.
When I try to plot a simple circle shape on my Roland CM24 the image cuts twice and is extremely slow (juddering).
I believe the double cut is caused by the hairline & fill but messing around have only gone from double cutting each shape individually to do double cutting the whole image.
I've just installed CorelDraw X6 onto a W7 PC. Pasting bitmaps from clipboard is not working. Nor is bitmap editing when a bitmap has been imported into a document. I've loaded X6 onto two other computers with the same result (or lack of).
View 9 Replies View RelatedOne of our AC08LT workstations is very slow on Copy / Paste command... Not bound to one dwg... Happens with any dwg.
View 4 Replies View RelatedI have recently installed Corel X6 and have found it to be painfully slow when opening files. At first I had thought it might be a network issue so I copied the file to a local drive and experienced the same problem.
The file is only 819Kb but it takes about 3 minutes to open the file. When I first select the file in the File Open dialogue window Corel just hangs for about 1 minute. It finally responds then takes a further 2 minutes to process and open the file.
I have turned off my antivirus software as I thought this might be a file scanning issue but still the same result.
Windows 7 64bit
i7 -3770 @ 3.40
GeForce GTX 550 Ti
16gigs ram
SSD Primary drive
**********************************
Since running x6 my system takes an unrealistic time to refresh graphics. I am working with a simple file and it takes 3 to four seconds to refresh after zooming in. My processor on CPU and Video card barely take a 20% hit.
Is Corel not setup to use the resources available? Is there some sort of Mad Hatter trick to fix it?
Here is a shot of the file I am working on after a fresh restart.
I have drawings created in X5 taht i need to put into word documents, i have in the past done this many times with no issues, i now have a drawing that will paste in, but some objects are missing, and some text is missing.
I have tried all of the Paste special options, the only one that will put all objects in is bitmap, with all others objects are missing.
If i print as PDF all objects are there, if i Export the graphic for Office, using compatibility mode places all objects, but if i choose editable mode the same objects disappear
I think I've got lots of existing files coming with this problem, the file is really slow and I try to use below method but it didn't work, since there's thousands of script "%AI8_BeginPluginObject" in that AI file.. Any other methods I can use so as to fix it.... and I'm using CS5 version, [UR] .....
View 8 Replies View RelatedI set up for a client of mine a new file server using samba.
Everything is working OK except the browsing/opening of files directly from the network drive, using both X4 amd X5 versions on windows XP and 7.
After fairly smooth sailing for using X6 I ran into a problem that's caused me to switch back to X5 for the time being :(
I work in files that have thousands of individual characters in them. In X5 if I wanted to change the color of about 10,000 individual characters it would take about 3 seconds to do so. If I do the same thing in X6 I takes at least 30 minutes (or longer, I just killed it by that time).
Working with large amount of texts is incredibly slow X6, not just 5 or 10% or slower, doing somethings takes up to 10x times as long.....
I know there is a lot of features for text in X6 but this decrease in speed puts a complete block in my workflow. Maybe Corel could have a feature that individual text characters have minimal properties associated with them or something?
Here are my specs:
windows 7 64bit with office 2010 installed
Intel(R) Core(TM) i7-2600K CPU @ 3.40GHz
NVIDIA Quadro 4000
16.0 GB ram
