CorelDRAW Graphics Suite 12 :: Parts Of The Text Disappear When Copy / Paste From Excel?
Nov 28, 2011
For some time I was using CorelDraw 12 with Windows XP and Excel 2007.I normally make some tables in Excel which I copy and paste into Corel using "Paste special"/Picture/Enhanced Metafile. In Windows XP there was no problem. Since I switched to Windows 7, I have the following problems:
- The font Wingdings 3 comes out as Arial.
- The second problem is a very strange thing: Some characters, such as ,-"; , always at the END of the line, just dissapear. It happens sometimes, not always, and I can't see absolutely no logic in it: I copy the same thing, paste it several times, and sometimes the comma comes out, sometimes not. I remember that this happened to me ONCE, long time ago, when I was still using XP, but then I restarted Corel and it stopped making problems. But now, with Windows 7, it happens almost all the time. I tried it on a few different PCs and I even tried it with Corel X4. Always the same problem.
View 2 Replies
ADVERTISEMENT
Mar 30, 2012
For some reason i can no longer copy and paste text from one page to another properly.
I write the text out as normal (not using a text box) but when i copy and then try to past to another page it then does several other things.
It changes the font and cap height, puts it onto a text box and centres it on the page?
If i copy and paste text along with an object (say a simple box) everything copies and pastes perfectly, just not text on its own
View 9 Replies
View Related
Apr 5, 2013
I have a problem in trying to copy text from an existing multi column text box and pasting it into another existing text box. It just doesn't work. If I copy text from a single column text box into another text box, single or multi column, it does work.
The only was to copy text from a multi column text box is to use paste special which then creates a completely new single column text box and pastes the text there. I loose all the formatting.
I can then copy the text from the text box created by that paste special process and then copy that to where I want it to go, but of course I then have to reset all the formatting.
I'm using the latest version of Corel Draw X6 -this probem however seems to have been introduced in X6 as I've just open X5 on my system and the copy/paste functon works as it shoud.
View 4 Replies
View Related
Apr 5, 2013
In my one file I am unable to do copy and past command in paragraph text mode in one particular paragraph text handle. Can't find the reason. But in same file with new artistic or paragraph text handle I can do copy and past.
View 3 Replies
View Related
Oct 26, 2012
the speed of cutting and pasting, as well as saving a drawing in CorelDraw X5 has drastically slowed down.Could it be a Windows issue and not a Corel issue? I have plenty of RAM and I've defragged.
View 2 Replies
View Related
Sep 5, 2009
Often whatever I'm working on in X4 disappears off the document page when I zoom in or out. It's still there (I can see it in the print preview)and I can print it, but I can't see it no matter what view (e.g., normal, draft, etc.) I select. If I select the entire page I can see the graphic and text handles, but nothing else. The only way I can see my work again is to save it, close the program, and then re-open the file. My computer is a Dell Precision Work Station T3400 running Vista Ultimate with an Intel Core2 Quad CPU, 4GB RAM, and my graphics card is an NVIDIA Quadro FX 570 256MB. All my software and drivers are up to date. The problem occurs no matter what screen resolution or refresh rate I'm using.
View 6 Replies
View Related
Aug 28, 2013
I am using corel X6 64 on a Dell optiplex 9010 intel(R) Core(TM) i7-3770 @ 3.40GHz 3.40 GHz. 8.00GB of RAM. Its taking about 1-2 minutes to copy/cut/open a file/save a file or even publish to PDF. On the same machine Same circumstances but different User i have no problem. I have to use my user because its connected to my email and at this company i cant change that. I have researched many forums and its not color styles or object styles. It does it on a new file with only one object created. I got a new computer signed on to my user account and the problem persists.
View 14 Replies
View Related
Dec 4, 2012
1, the commands DO work if the text is confined to just ONE page, even if there are multiple linked text frames.
2, it's only the Copy command that doesn't work. Once copied, text does paste irrespective of the amount of text or linked pages.
And do I have to wait for 6.3 to get a resolution ? On Win 7, 64 bit
View 12 Replies
View Related
Dec 1, 2010
We are having a big problem with dropping lines of text or parts of graphics. It is happening on 3 different laser systems and 2 different printers.
View 14 Replies
View Related
Jun 21, 2011
I am building a big catalog for hundreds of products, and it would be a life savior if i could connect dynamically the (customized) text (fields) in the .cdr file to an external excel file data. For example smth like the text field "Title" to be taking its values from the column "Description" of the excel file, incrementally as each line of the excel file could represent a record. This way also when the excel file changes, (because it will be probably like 10 more versions before it gets final), the content inside the corel draw file will change automatically as well.
Download sample corel file here :
[URL]....
and sample excel file here :
[URL]....
How to accomplish smth like that or even faster / simpler ......
View 2 Replies
View Related
Jul 19, 2013
I want to copy a value/text in cells from excel and paste it in specific mtxt that has been made in existing .DWG file.
I have done it by copy and paste, but it doesn't work effectively since there's too many cells to be pasted.
One of my cells entry which should be copy is in D5 and the coordinate of mtxt in autocad is (17,46 15,03 0,000) both of those file is located in same folder
View 1 Replies
View Related
Jun 4, 2012
In the last 2 days Corel has decided to start changing Artistic Text to Paragraph Text when I copy & paste it across documents, completely changing the font, size & colour of what I am copying.
I've just done a factory reset & it's still doing it.
I don't recall doing anything that would change a setting.
The text I am copy & pasting are disclaimers that are all set on 1 document & I copy & paste them to a proof as needed.
View 4 Replies
View Related
Jun 1, 2011
With X4 I can right click a piece of text - with pick tool - and drag the selected text to an open area and the text is duplicated. With X5 this does not work - text is locked. The only way to duplicate is to copy / paste. Is there a setting that needs to be reset.
View 2 Replies
View Related
Nov 4, 2011
11-0761 R3 C PATTERNS.cdr
These are from the Samples 9 solar flairs and made a few sample options (customizing the tiling and width) from there.
why some of these texture fills disappear when outputting to PDF or even converting to Bitmap?
View 8 Replies
View Related
Jun 1, 2011
We are using Coral Draw 11 and have to get a lot of our data from Excel. Currently we are copying and pasting the information in, but this is very time consuming. Is there a faster and simplier method?
View 4 Replies
View Related
Jun 19, 2012
i have a 2 artistic text blocks (both with different fonts) in same corel document and when i ctrl+c/ctrl+v from one to other it copy/paste not only the text but also font type/size and color.
I want just the text copied not all the properties.
View 3 Replies
View Related
Jun 28, 2012
Is there an updated copy of the macro Paste from AI anywhere to be found?
The one at Oberon is only for X4 but seemed to work in X5 but not X6.
View 9 Replies
View Related
Apr 26, 2011
I have done it in a lot of steps. There must be a simple way to do it.
View 3 Replies
View Related
Sep 5, 2013
I've created a personalized invoice form in which I integrated a Microsoft Excel from to it. Ever since the version I integrated my Excel forms it has always been an issue.
When I integrate a Microsoft Excel form in CorelDRAW and apply changes to it, the form doesn't retain its size and emplacement. The change VERY slightly, but still ALWAYS change.
View 1 Replies
View Related
Nov 26, 2011
I'm having some trouble setting my workflow and I need linking data to corel draw from excel. Basically, what I want to do is to have excel data automatically copy from Excel to Draw and "Paste Special / Paste Link Objects/MS Excel Worksheet is almost what I need.
It would be perfect if only it would copy CONTENT of the Excel file or cells, not their formating (font, size, border etc.) which I want to do in Corel, since separation of the content (excel) and form (draw) would be just natural and functional - don't want my number crunchers to affect design of the Draw document, just as I don't want to have my designer to do the math
So - is there way to link objects (cells from Excel) but to transfer content (text) only or should I revert to VBA?
View 1 Replies
View Related
Dec 20, 2012
I've just installed CorelDraw X6 onto a W7 PC. Pasting bitmaps from clipboard is not working. Nor is bitmap editing when a bitmap has been imported into a document. I've loaded X6 onto two other computers with the same result (or lack of).
View 9 Replies
View Related
Jul 25, 2011
I have drawings created in X5 taht i need to put into word documents, i have in the past done this many times with no issues, i now have a drawing that will paste in, but some objects are missing, and some text is missing.
I have tried all of the Paste special options, the only one that will put all objects in is bitmap, with all others objects are missing.
If i print as PDF all objects are there, if i Export the graphic for Office, using compatibility mode places all objects, but if i choose editable mode the same objects disappear
View 7 Replies
View Related
Nov 16, 2012
Is it possible to do such a thing? Everyday I have to change the production number in the label artwork. Can I link this production number in the artwork to an external file such as an Excel datasheet?
View 3 Replies
View Related
Aug 9, 2011
I am somewhat new to CDX5 and on a VERY steep learning curve.
Anyway, I have an image of a girl and I was able to powerclip the outline away from the background, however I want to remove the infill, which is a dark colour between her arms and her body. Her arms are by her side.
Also the dark colour between her legs. I need to do this to superimpose the image across another background.
View 6 Replies
View Related
Oct 9, 2013
How do you paste a website domain name without causing the underline for hyperlink?
When I copy and paste text which includes a website link [URL] how do I stop or prevent the underline? I have tried changing the options in the page setup for text for automatic Hyperlinks but that does not stop the underline when pasting text
View 13 Replies
View Related
Jun 1, 2012
I am having an issue with X6's print merge not recognizing a properly formatted numeric filed from my Excel spreadsheet. My first issue was that Corel was adding a decimal point after my numbers. This was when they were still formatted as text fields. (which i still don't understand why, since they were just TEXT fileds)
I know that the fields need to be "numeric" fields.
FYI i have ALREADY COMPLETED MY TASK by using an "added" numeric filed that i added IN CorelDraw and then used the "Numeric Field Options" at the bottom of the page to get my number sequence.
However, that is not my question.... my question is: How do i get corel to RECOGNIZE a numeric field AS a numeric field in the first place.
View 2 Replies
View Related
Aug 31, 2012
I am attempting to copy and paste a part of a drawing from AutoCAD 2011 into ms, Excel or Word. I am able to copy within a vport so my whole screen is not copied. My problem is only 2D objects show up when I paste. I tried different visual styles and colors but still cant get my solid objects to appear.
View 7 Replies
View Related
May 7, 2013
I want to colour just parts of an old black and white photo and add very subtle pink cheeks to the subject.......how can I do this in photo paint.....
View 7 Replies
View Related
Oct 29, 2013
Is there a way to copy a portion of a drawing in X6 for instance to replicate the portion inside the red square only.
View 9 Replies
View Related
Mar 2, 2012
I have a problem with each time I move a image, it makes a copy for the last position.
What setting would cause this?
View 5 Replies
View Related
May 24, 2013
What is happening with objects that are extruded on page 1 being copied to page 2
and the extrude flies out of rage, is that some sort of special effect ?? I wish I could animate it.
View 13 Replies
View Related
