CorelDRAW Graphics Suite X4 :: Graphics And Text Disappear After Zoom In Or Out Quickly

Sep 5, 2009

Often whatever I'm working on in X4 disappears off the document page when I zoom in or out. It's still there (I can see it in the print preview)and I can print it, but I can't see it no matter what view (e.g., normal, draft, etc.) I select. If I select the entire page I can see the graphic and text handles, but nothing else. The only way I can see my work again is to save it, close the program, and then re-open the file. My computer is a Dell Precision Work Station T3400 running Vista Ultimate with an Intel Core2 Quad CPU, 4GB RAM, and my graphics card is an NVIDIA Quadro FX 570 256MB. All my software and drivers are up to date. The problem occurs no matter what screen resolution or refresh rate I'm using.

View 6 Replies


ADVERTISEMENT

CorelDRAW Graphics Suite 12 :: Parts Of The Text Disappear When Copy / Paste From Excel?

Nov 28, 2011

For some time I was using CorelDraw 12 with Windows XP and Excel 2007.I normally make some tables in Excel which I copy and paste into Corel using "Paste special"/Picture/Enhanced Metafile. In Windows XP there was no problem. Since I switched to Windows 7, I have the following problems:

- The font Wingdings 3 comes out as Arial.

- The second problem is a very strange thing: Some characters, such as ,-"; , always at the END of the line, just dissapear. It happens sometimes, not always, and I can't see absolutely no logic in it: I copy the same thing, paste it several times, and sometimes the comma comes out, sometimes not. I remember that this happened to me ONCE, long time ago, when I was still using XP, but then I restarted Corel and it stopped making problems. But now, with Windows 7, it happens almost all the time. I tried it on a few different PCs and I even tried it with Corel X4. Always the same problem.

View 2 Replies View Related

CorelDRAW Graphics Suite X5 :: Converting RGB Values ​​to Pantone Quickly?

Nov 7, 2012

converting RGB values ​​to Pantone quickly.

View 15 Replies View Related

CorelDRAW Graphics Suite X5 :: Quickly Apply Uniform Transparency At Given Percentage?

Jun 19, 2013

Is there any way to quickly apply uniform transparency at a given percentage, without going through the properties bar?

View 5 Replies View Related

CorelDRAW Graphics Suite X3 :: Export Text Or Graphics As EPS Files - Vinyl Cutting?

Mar 18, 2012

why (sometimes) when I export text or graphics as .eps files to my cutter it cuts the same outline up to four to five times and ends up cutting right through the backing paper. I have been using postcut with various corel editions since 1997 with no problems until recently. It also cuts random lines through lines of text which is such an expensive pain in the ass.

I started to use the production manager in flexi sign to cut my designs and same thing happens, except for the random lines but it will make up to five cuts on some objects. All text and graphics are exported the same. Has something in corel newer versions changed in relation to this?

View 7 Replies View Related

CorelDRAW Graphics Suite X5 :: Dropping Lines Of Text Or Parts Of Graphics?

Dec 1, 2010

We are having a big problem with dropping lines of text or parts of graphics.  It is happening on 3 different laser systems and 2 different printers. 

View 14 Replies View Related

CorelDRAW Graphics Suite X5 :: Missing Text Or Graphics When Printing?

May 9, 2011

X5 Recently have begun missing parts of print out. Tried to duplicate but appears completely random.

Output to both Full colour laser and Wide Format printers will miss either text or part of objects. Today printed the text but not the text effects.   Initially closed and reopened, rebooted, However this has become a now daily feature so regardless tried reprint from the same screen so next print has everything included.

Very costly and time consuming - print preview shows all correct but output is not the same.

Running Win 7 64bit  8GB Ram

View 14 Replies View Related

CorelDRAW Graphics Suite X3 :: Blank Blocks Behind Text And Graphics?

Jan 2, 2013

02012013010.jpg

Blank Blocks behind text and graphics

View 4 Replies View Related

CorelDRAW Graphics Suite X5 :: Smooth Zoom With Z Down?

Jun 11, 2011

In PS, if you hold the Z key and move the mouse/stylus left/right, it smoothly zooms in by small increments, and the zooming is centered on where your mouse is.

I know some will say that Draw shouldn't try to be PS or Illustrator, but this type of functionality is really nice, and it would be great to have something similar.

I have A and D mapped to zoom in/out but it seems like big zoom jumps and it's a little finicky to get the stuff on the screen you want to see at a high enough zoom level without having to use zoom tool and draw a box.  To get, the positioning, I have pan once on S key, but getting a good zoom level is still a bit finicky.

View 6 Replies View Related

CorelDRAW Graphics Suite X5 :: Zoom And Center

Oct 29, 2011

In some previous versions, when I zoom In/Out with mouse-scroll it will zoom to mouse pointer and centre to the screen itself, but in Corel draw X5, the zoom function works properly but not center to screen the mouse-pointer and document. 

View 4 Replies View Related

CorelDRAW Graphics Suite X4 :: Error Working With Texture Fills - They Disappear When Outputting To PDF

Nov 4, 2011

11-0761 R3 C PATTERNS.cdr

These are from the Samples 9 solar flairs and made a few sample options (customizing the tiling and width) from there.

why some of these texture fills disappear when outputting to PDF or even converting to Bitmap?

View 8 Replies View Related

CorelDRAW Graphics Suite X6 :: Unable To Zoom With Wheel

Mar 25, 2013

Using CorelDraw X6 on Windows 8 x64, and a Kensington Expert Mouse (that's a type of trackball).

For some reason, I can't use the wheel to zoom in or out. Just doesn't work. The drivers are installed, and the wheel works fine in all other applications, but absolutely refuses to cooperate in CorelDraw X6.2 (had this issue since CorelDraw 6).

View 11 Replies View Related

CorelDRAW Graphics Suite X6 :: Wheel Zoom Function

Jun 5, 2012

I do not know why this function does not come by default in CoreDraw: "Center mouse when zooming with mouse wheel" From my point of view is much more accurate. The default option in recent versions is a mess when zooming with wheel.Is there a reason?There are some other features that you think have no reason to be?

View 2 Replies View Related

CorelDRAW Graphics Suite X3 :: Scroll Wheel On Mouse Changes Zoom

Mar 27, 2011

If I use the scroll wheel on my mouse in X3 it changes the zoom and does not scroll.

Using the same in X5 works OK and scrolls.

How I can change a setting somewhere so that it scrolls in X3

View 5 Replies View Related

CorelDRAW Graphics Suite X5 :: Finding A Way To Alternate Between Zoom Levels?

Jun 23, 2013

way to alternate between zoom levels? I have wOxxOm's ZoomOutBack, which is supposed to "go to last used zoom when being invoked after zooming in" but it doesn't seem to be working for me.

View 13 Replies View Related

CorelDRAW Graphics Suite X5 :: Any Way To Set Zoom Tool To Smaller Increments

Feb 6, 2013

I'm used to working with a zoom that increases by 10% per click below 100%, and 20% above that. Is there a way to duplicate this? Using a drop-down menu is just too slow.

View 14 Replies View Related

CorelDRAW Graphics Suite X6 :: Text Over Artwork?

Feb 25, 2013

I really don't know the best way to do this or maybe there is a standard, but here is what I am wanting.

When you put text over a simple vector graphic, the graphics makes it hard to read the Text.

I normally delete the graphic lines touching the text and this works but was wondering if there was another way.

Example: if this is a one color design "White" and it is just an outline of lets say  a human, and I want to display text which is "White" also across the human image sometimes the image will interfere with being able to read the text clearly.

View 12 Replies View Related

CorelDRAW Graphics Suite X5 :: Text Editing Box

Feb 28, 2013

Recently when completing a project, instead of being able to just click and write text or click on and edit existing text, a 'edit text' pop up box appears. i have looked at the setting and i cant seem to work out what i have done and how to correct this?

View 3 Replies View Related

CorelDRAW Graphics Suite X6 :: New Text Defaults To RGB?

Sep 5, 2013

Whenever I create new text in a document, it defaults to RGB.  When I start a new page, all of my settings are set to CMYK.  I rarely use RGB.  Where is the setting so that I can default new text to CMYK?  I cannot locate this setting an any of my options.

View 2 Replies View Related

CorelDRAW Graphics Suite X6 :: How To Add Anchor To Any Text

Jun 27, 2012

I created a presentation in corel, the final output will be display in .pdf format,

Problem is I unable to create anchor to a specific text ?

View 8 Replies View Related

CorelDRAW Graphics Suite X6 :: Contouring Text

Oct 9, 2013

I am having great difficulty getting my text to contour around a bitmap file.  I know I am doing it correctly but it is not working.  It worked in a portion of the file but will not work at all for the bottom portion. 

View 4 Replies View Related

CorelDRAW Graphics Suite X5 :: Vertical Text

Jun 5, 2012

I have an issue with my text tool. This is on a different computer than the one that was having the Corel corruption I posted on earlier.

When I have the text tool selected and click to to start typing, it always types vertical instead of horizontal. How can I change the setting of this? I can't find any options for this in the customization.

View 4 Replies View Related

CorelDRAW Graphics Suite X5 :: Text Above And Below Path

Jul 22, 2011

how to get text above and below a path. The path is a circle, and I want to achieve 2 words above the circle and 2 words below. I can get the words below, and to read the correct way round etc, or I can get the words above, but I cant achieve both at the same time

View 5 Replies View Related

CorelDRAW Graphics Suite X6 :: Odd Edit Text Box

Apr 3, 2013

I am running CorelDraw X6 and I am having a strange issue.  I have it installed on a PC with windows 7 64 bit, and CorelDraw is also 64 bit.  The issue is that when I have a string of text and I try to edit it via the "edit text" box, it wants to shift the text down a row after closing the box.  so if I open and close the edit text box lets say 5 times, the text will be dropped down 5 spaces.  This problem does not occur if I use the text tool on the left side toolbox, only if I use the edit text box.  Also, I have another PC with almost identical hardware, and it does not have any issues.  I have tried installing .NET, C++, and many other tricks to try to fix it.  I have reinstalled CorelDraw, and I have up to date drivers for my graphics.

View 2 Replies View Related

CorelDRAW Graphics Suite X4 :: Text Styles

May 30, 2012

Problem with text styles: I have a big body of text, with several styles applied. The problem is, editing one of the styles does not affect the text that has this style applied to it. Changing the style or creating a new style does not work - it's like these particular parts of text are immune to editing the style. It works only when I select the text and manually apply the style. Further editing the style does not affect this text, I have to manually select it and apply the style again.

View 6 Replies View Related

CorelDRAW Graphics Suite X4 :: How To Put Text On A Path

Jun 21, 2011

URl....I have never used a text box. Somehow when I copied my list of names from another page, I ended up with rows of them. I really really don't want to retype 132 names.  I plan to put them on circles.  When I try to do fit to path it says its invalid. I deal with text everyday and always know what I am doing. I know how to put text on a path. I just don't know how to do anything with these text boxes. If i break them apart, it first breaks them into individual names, and next into individual letters.

View 1 Replies View Related

CorelDRAW Graphics Suite X6 :: X6.4 Artistic Text

Oct 27, 2013

Draw X6.4..if I make a line break in Artistic Text (Enter) I get a forced line break (as with Shift+Enter).In the X5 is still alright

View 13 Replies View Related

CorelDRAW Graphics Suite X6 :: Text Mode Crashes While Typing Text Window Box?

Jul 14, 2013

I had several CorelDraw documents that crashes on me, and the auto-backup did not work.

In all these documents, if I open the text paragraph window and typed on it, the entire program will crash if I exit that window after finishing.

I discovered that if I typed directly on the text paragraph, it will not crash. That means do not open the text paragraph window to do editing. But this makes editing very slow since it seems to be more memory intensive.

Strange the auto-backup directory/folder always do not have my backup files too.

View 6 Replies View Related

CorelDRAW Graphics Suite X6 :: Fitting Text To Path / Where Text Had Already Been Converted To Curves

Nov 20, 2013

A client sent me their logo where the name is straight across. They would now like to wrap it around the circle in their logo... They do not know the name of the font, what the font couldn't id it,  not much response on their forum...

Is there a way to fit text to path, where the text has already been converted to curves?

View 6 Replies View Related

CorelDRAW Graphics Suite X5 :: Message - Click Here With Text Tool To Add Paragraph Text Here?

Jul 29, 2011

I removed text from a rectangle and that message keep displaying in that rectangle.

CorelDraw X5 v. 15.2.0.686 Hot Fix 4 - Windows 7-64

View 4 Replies View Related

CorelDRAW Graphics Suite X5 :: Unlinking Text Frames To Move Text Independently From Others?

Apr 5, 2011

Is there a way of unlinking the text frames so that you can move the text independently from the others?

View 5 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved