Recently when completing a project, instead of being able to just click and write text or click on and edit existing text, a 'edit text' pop up box appears. i have looked at the setting and i cant seem to work out what i have done and how to correct this?
View 3 RepliesThis just started - after editing artistic text it drops down a space or two and has to be repositioned.
Is there a way to stop this?
Yesterday, suddently when editing text in a document, clicking outside of the text edit, CDR crashes:
Runtime error!
Program: c:Program Fi...
This application has requested the Runtime to terminate it in an
unusual way.
Please contact the application's support team for more information.
I have tried to do the tricks, I googled, like resetting to factory, editing the xml file and running as administrator. Nothing works. It is when I edit any font, and in a new document also. AND update of CDR X4 with service pack 2 did not work.
In X5, I was able to edit the position of the line for underline text : Thickness and position, up or down in %
The last command for Characters Effect | Underline was « Modified... »
Cannot find it in X6 ! It's not available in the same menu !
I really got used to the short cut of editing text pressing ctrl+left SHIFT + t , this brings me right into the
text box where I am able to quickly access all the text features, now since last update every time I make a text change in that window my text drops one line down and even though I will hit the cursor to front and back space it bringing it right to top when I hit OK it still drops my text one line down, this has become very annoying...
I love this feature but I am unable to bring it back to its original functional way. I did reinstalled corel , and yes I did reset the application still the same thing is happening.
Whenever I edit text in the pop-up dialog, there is usually an extra line inserted at the top of the text (a blank first line). I can't get rid of this extra line through the pop-up edit window, I can only delete it using the text tool directly on the page. This only started with the latest update.
View 2 Replies View RelatedIn coreldraw x6 selecting text for editing show light blue background. How can I change it to gray as it is in coreldraw x5.
View 7 Replies View Relatedin earlier versions of draw you could move one end of line with the pick tool by moving the cursor over the end node grabbing it and moving it where ever you wanted. With x5 it seems that you must go to the node editing tool to select the node. Is there a setting I'm missing that will allow the pick tool to select node?
View 5 Replies View RelatedI have a problem with editing img raster in Corel Draw X3.
I cant open Photo-Paint... If i use the button to editing a raster, opens Windows Paint.This problem started today. Yesterday everything worked normally.
I am new to Coral Draw x5, and we have just purchased a Roland VersaCamm vs-420, I have an eps file, once i am ready to create a cutline i click shaping > Boundary thats all good, then i can get my cut contour line which is around the image, how can i increase the cut line so i have a 1/2mm white gap around the file im cutting?
View 1 Replies View RelatedI have an existing font I I want to chop and change about eight characters of the font. The changes I need to make are very small slight change to the stand of the A.
I'm very new to corel draw - I have tried reading the tut's on creating your own font but I think it is a little overkill for me needs.
Can I convert an existing font to curves do the slight changes then export it as a TTF ?
All editing I make on a page changes all the pages.
I must have changed a setting unknowingly.
So I will jump right to the issue. I like to make my edits occasionally in wireframe, and as I began to manipulate or move nodes around, the minute I finish editing the first node or a group of nodes, all of the nodes vanish. The only thing that is present in wireframe after they disappear is the object (or line that I am editing) no nodes.
Now, I have learned that if I zoom in or out, they appear again, I would have to continuously do this in order to make edits in wireframe. I do not have this problem in Enhanced View.
Windows 8 / ATI Radeon HD 5700 Series / AMD Phenom II X4 965
My graphic card is up to date; however, I dont believe this is a graphic issue due to the fact that I can edit in Enhanced view without issues.
I wanted to edit these Japanese characters.
They were combined, so I had to separate them first. I picked them and used the Break Curve Apart feature. And here's what I got.
All inner contours were GONE! Here's the file.
I found the page number option in the prepress menu. that is coreldraw adds page number in the bottom centre to all the pages. Is it possible to edit the font and location of page number?
Till now i have been using page numbering macro that's built inside coreldraw by default. but its not dynamic. i have to do page number all by start if i delete a page in my document.
Windows 7 [64-bit], Core i3 - 3.02 GHz, 4GB DDR 3 RAM
If I open a 4-page PDF in CorelDraw, I can edit anything in it. But if I save my changes, it saves as a 4-page cdr file. But I want to save the changes to the PDF. Is the only way to save the changes to the pdf file to re-publish the whole 4 pages to PDF again and have it replace the old one when asked? Wouldn't this further compress any jpgs?
Re-publishing the whole thing and changing the settings to no compression (and remembering to reset them back again later!) seems very inefficient......The question, of course applies to single page pdf's as well, but I'm thinking of deleting or adding a page or changing page order.
Why this message? Why do I have to "draw inside the lines"? I don't even have the boundries of a paper on my surface, so I don't know where the border is. How can I fix this?
What I tried to do here was rotating a small object 90°.
When I create my merge document, regardless of how many pages, I will need to make edits to some of the text. Corel will randomly crash when I try to edit the text. Every time. I have lots of work to do and have not the time to deal with this.
Using Corel Draw X4 v14.0.0.701
I've been trying to edit a certain Corel Draw document. At first it told me I was missing a font. So I closed the Corel Draw and installed the missing font.
But now its not showing the new font in the document. I see the new font in the control panel. And i can type a new text box. But I have 60 pages or so and I dont want to retype all these text boxes.
Is it possible that I can open a bitmap present in a coreldraw file in photoshop, edit it there and it gets back to its original position. that is the thing for which corel photo paint gets opened, i can set Adobe Photoshop for editing images?
View 14 Replies View RelatedHow come I can't choose 48-bit color palette and color picker when editing a 48-bit RGB image?
View 11 Replies View RelatedIf it´s possible to import vector graphic with fountain fills from AI (adobe illustrator) to CorelDraw x6 for further editing.
if i export from AI to eps or ai, and import to x6 the graphic with fountain fills becomes raster, if i export to pdf, the graphic is almost okay, but not as i wish to.
why (sometimes) when I export text or graphics as .eps files to my cutter it cuts the same outline up to four to five times and ends up cutting right through the backing paper. I have been using postcut with various corel editions since 1997 with no problems until recently. It also cuts random lines through lines of text which is such an expensive pain in the ass.
I started to use the production manager in flexi sign to cut my designs and same thing happens, except for the random lines but it will make up to five cuts on some objects. All text and graphics are exported the same. Has something in corel newer versions changed in relation to this?
We are having a big problem with dropping lines of text or parts of graphics. It is happening on 3 different laser systems and 2 different printers.
View 14 Replies View RelatedOften whatever I'm working on in X4 disappears off the document page when I zoom in or out. It's still there (I can see it in the print preview)and I can print it, but I can't see it no matter what view (e.g., normal, draft, etc.) I select. If I select the entire page I can see the graphic and text handles, but nothing else. The only way I can see my work again is to save it, close the program, and then re-open the file. My computer is a Dell Precision Work Station T3400 running Vista Ultimate with an Intel Core2 Quad CPU, 4GB RAM, and my graphics card is an NVIDIA Quadro FX 570 256MB. All my software and drivers are up to date. The problem occurs no matter what screen resolution or refresh rate I'm using.
View 6 Replies View RelatedX5 Recently have begun missing parts of print out. Tried to duplicate but appears completely random.
Output to both Full colour laser and Wide Format printers will miss either text or part of objects. Today printed the text but not the text effects. Initially closed and reopened, rebooted, However this has become a now daily feature so regardless tried reprint from the same screen so next print has everything included.
Very costly and time consuming - print preview shows all correct but output is not the same.
Running Win 7 64bit 8GB Ram
02012013010.jpg
Blank Blocks behind text and graphics
I had several CorelDraw documents that crashes on me, and the auto-backup did not work.
In all these documents, if I open the text paragraph window and typed on it, the entire program will crash if I exit that window after finishing.
I discovered that if I typed directly on the text paragraph, it will not crash. That means do not open the text paragraph window to do editing. But this makes editing very slow since it seems to be more memory intensive.
Strange the auto-backup directory/folder always do not have my backup files too.
A client sent me their logo where the name is straight across. They would now like to wrap it around the circle in their logo... They do not know the name of the font, what the font couldn't id it, not much response on their forum...
Is there a way to fit text to path, where the text has already been converted to curves?
I removed text from a rectangle and that message keep displaying in that rectangle.
CorelDraw X5 v. 15.2.0.686 Hot Fix 4 - Windows 7-64
Is there a way of unlinking the text frames so that you can move the text independently from the others?
View 5 Replies View Related