I've been trying to edit a certain Corel Draw document. At first it told me I was missing a font. So I closed the Corel Draw and installed the missing font.
But now its not showing the new font in the document. I see the new font in the control panel. And i can type a new text box. But I have 60 pages or so and I dont want to retype all these text boxes.
Yesterday, suddently when editing text in a document, clicking outside of the text edit, CDR crashes:
Runtime error!
Program: c:Program Fi...
This application has requested the Runtime to terminate it in an
unusual way.
Please contact the application's support team for more information.
I have tried to do the tricks, I googled, like resetting to factory, editing the xml file and running as administrator. Nothing works. It is when I edit any font, and in a new document also. AND update of CDR X4 with service pack 2 did not work.
I have an existing font I I want to chop and change about eight characters of the font. The changes I need to make are very small slight change to the stand of the A.
I'm very new to corel draw - I have tried reading the tut's on creating your own font but I think it is a little overkill for me needs.
Can I convert an existing font to curves do the slight changes then export it as a TTF ?
I've designed a simple graphic in X6 and printed directly to Roland ecosol printer. My black text doesn't show up on the print. I've spent a few hours and a lot of paper trying to figure this out.
The black text that isn't showing up is designed to be on top of a yellow box. When I print as intended, the text doesn't show. However, when I move the text off the box, it is printed and visible. Is it a document setup, color management, or print settings issue? Or none of the above?
I just got myself a new laptop with windows 7 on it. When I open a file that is missing fonts on my system the Font Substitution for Missing Fonts does not display on opening that file. Corel doesn't replace the missing font with an other font text it just shows up on my screen as a blank page. I need to know what fonts I'm missing in my system so that I can install them and continue working on my projects.
View 10 Replies View RelatedI just tried to open a CorelDRAW document on my other computer where I'm obviously missing one of the document's fonts.
Problem:
The CorelDRAW font substitution dialog does not list the missing fonts:
Thus, it's impossible to install them to get the document working as expected.x.
CorelDRAW Graphic Suite X6.4 @ Windows 7/Windows 8 - 64 Bit, Windows Server 2008 R2, Windows Server 2012
I tried Nexus font (finally) and don't see why people have mentioned it. I don't like it and uninstalled it quickly.Which font manager do you think is better than Font Nav?
View 13 Replies View RelatedI want to use the font box, but all the font headings are dead - light gray. How can I turn them on and make them black / active?
View 5 Replies View RelatedI am attempting to hyperlink from my CorelDraw file to a separate PDF. I want the link to work when I export my CorelDraw page to pdf, and I would like to be able to hyperlink to a different pdf file. A quick google search turned up a file:\ syntax to lead with in the hyperlink but I'm having trouble getting it to work.
View 4 Replies View RelatedIs there any way to lock or protect the image and text in a corel draw when you export as cdr, ai or pds. I need to give a document to a photoshop users but I don't want the person to be able to remove or export the image or copyright text line.
View 7 Replies View RelatedAt the bottom of Create a New Document is a box that says Do not show this dialog again. I checked it and now I don't know how to get it back.
View 7 Replies View RelatedX5 Recently have begun missing parts of print out. Tried to duplicate but appears completely random.
Output to both Full colour laser and Wide Format printers will miss either text or part of objects. Today printed the text but not the text effects. Initially closed and reopened, rebooted, However this has become a now daily feature so regardless tried reprint from the same screen so next print has everything included.
Very costly and time consuming - print preview shows all correct but output is not the same.
Running Win 7 64bit 8GB Ram
It's concerning the font SF Movie Poster
Two machines, both with XP, Corel Draw X3 13.0.0.576 and SF Movie Poster installed - BUT two different outputs.
Both Corels open the file and the characters with SF Movie Poster (I checked it by clicking in the words)
e.g. figure 1:
The first machine shows the number one as The other machine shows it like 1
I am new to Corel Draw. How do I arc font? I have a customer that wants some writting arced above her logo and below her logo. The only way I know how is to creat a circle and "Fit Text To Path". But then I can't seem to delete the circle without erasing the writting as well.
View 7 Replies View RelatedSo in document color settings in color management, should the primary color mode be RGB or CMYK? I only print inkets and never send stuff out to a regular printer.
should all color settings be at RGB if the option is offered?
Got the "Cannot open a blank document" ERROR Message when I went to open a recently created Corel Draw X5 file. Using Windows 7 Professional.First time I've gotten this message.
View 1 Replies View RelatedI have a senior project within CorelDRAW X6 (Student) that spans around 1200 pages spread across about 25 different .CDRs. I need to export all of those pages as .JPEGs so I can manipulate them in another program.
I know that you can batch export using a macro. But I only need exactly what's on the page at the page size. My solution was to crop each page (yes, one by one) and then later do a batch export on all of them. However, when batch exporting to .JPEG, I noticed that I was getting different results than when I had exported pages individually in the past. At first I thought this was a macro issue. But when I was trying various things I realized that anytime I closed a document after cropping it, upon reopen my drop shadows would be gone. And of course, I didn't realize this until I had already cropped all 1200 pages and was doing my batch export. I've tested it and if I crop a document and then batch export the pages before closing the document I can get the results I need. But that would require me to crop all 1200 pages again and my time is running short.
(Ignore the color differences here...I'm fairly certain it's because I didn't pay attention to my color settings on export here) Export before closing via file converter macro:
Export after closing file and then batch exporting via macro:
Any macro for cropping to page size and then exporting to jpeg (or other format) all in one fell swoop? This would hopefully bypass this issue and save me the huge problem of having to crop them all again. I could just open each document and run the macro. In theory, that would be quick.
When I export or publish to pdf from CorelDraw X6 the document size changes.If lets say i export an A4 page and then inport it again the size of the page has changed from 210x297 to 209,903 x 296,686 !
View 4 Replies View RelatedWindows Vista 64, corel crashes on creating new document or opening existing one. It crashes twice actually. First crash spews out this:
Nazwa zdarzenia problemu: APPCRASH Nazwa aplikacji: CorelDRW.exe Wersja aplikacji: 16.0.0.707 Sygnatura czasowa aplikacji: 4f4c60a4 Nazwa modułu z błędem: MSVCR100.dll Wersja modułu z błędem: 10.0.40219.1 Sygnatura czasowa modułu z błędem: 4d5f034a Kod wyjątku: 40000015 Przesunięcie wyjątku: 00000000000761c9 Wersja systemu operacyjnego: 6.0.6002.2.2.0.256.6 Identyfikator ustawień regionalnych: 1045 Dodatkowe informacje 1: e139 Dodatkowe informacje 2: ed2429a1e405cd1a6fea3328235a733b Dodatkowe informacje 3: 08d2 Dodatkowe informacje 4: 7206fe9a4464dcae865f27c5d1766c68
second with this:
Nazwa zdarzenia problemu: APPCRASH Nazwa aplikacji: CorelDRW.exe Wersja aplikacji: 16.0.0.707 Sygnatura czasowa aplikacji: 4f4c60a4 Nazwa modułu z błędem: mfc100u.dll Wersja modułu z błędem: 10.0.40219.1 Sygnatura czasowa modułu z błędem: 4d5f1436 Kod wyjątku: c0000005 Przesunięcie wyjątku: 0000000000001b33 Wersja systemu operacyjnego: 6.0.6002.2.2.0.256.6 Identyfikator ustawień regionalnych: 1045 Dodatkowe informacje 1: 433d Dodatkowe informacje 2: c4f485ce7f6b39f48369e75a4a5c6af7 Dodatkowe informacje 3: f657 Dodatkowe informacje 4: bc294d6383f97effacd7dcb23980b3fe
Both are Visual C++ related as far as I can see. I have all the Visual C++ redistributables installed and up to date.
I saved a book a friend of mine worked on using coreldraw 12 on a cd and tried to open it in X6 but it won't open. I think My sys. Os is a 32 bit, I have a trial version of x6 on this comp. and full version 12 on another. When I ok convert to bitmap Error message says invalid file format.
View 1 Replies View RelatedI got problems with pdf files in corel x3. When I want to save a large document pdf, it become a blank document when I open it with Adobe Reader.
View 3 Replies View RelatedRecently when completing a project, instead of being able to just click and write text or click on and edit existing text, a 'edit text' pop up box appears. i have looked at the setting and i cant seem to work out what i have done and how to correct this?
View 3 Replies View RelatedIf I create some text and change it from the default size (24 pt) to 14 pt and then rotate it, the size changes to the default point size (24 pt, I have even seen it do ~17.54)
Appears to have manifested with v16.4
It also squishes the text...
I have more than 1000 installed on an xp system. I know I don't need this many. I'm sure I could get by with 400 or less. How do you thin down your fonts? How many do you try to keep on your system?
What are you using for font management? Bit stream? Something else?
Current System: i3 3.07ghz, 3gb ram, Windows 7 32 bit with all updates and X6
I am trying to set the cut lines around a font that is an outline font and I can't get it to work - the outline just turns into the cut line and doesn't cut the font that I need.
View 14 Replies View RelatedI have had this problem since I loaded CorelDRAW X6 (64-bit) in June, 2012 but was busy learning all that was new since the ancient version running on my equally ancient Windows98 machine. Up until this point, I have tried all of the directions in the manual, this forum and on the website which includes, "Save Settings As Default". (These instructions do not differ from those I use in the old CD package only where I make them.)
These are the steps taken:
Open CorelDRAW X6 starting a new file.
Go to "Text Properties" Docker & choose the font, size, etc.
Under Tools, select "Save Settings As Default", close CDX6.
Technically, these steps should have saved the new font with associated choices for all future files until I change them again, but it does not. When I open a new or existing file, my new font changes do appear on the Text docker so I choose the outlined A on the toolbox bar, my choices are still showing on the Text docker and now, also on the Property bar. As soon as I click on the workspace where the flashing cursor awaits input, the text properties change to Arial, 24 pt, which has appeared since I first loaded the package. Should I redownload and reinstall the software? If so, where are the preference files so I can save them?
Scanned from a cap:
Let not the one who says it can't be done interrupt the one who is doing it.
My font navigator used to install the font automatically if I have it on the system but it wasn't installed. It has quit doing that. It tells me I'm missing the font then I have to manually go to the navigator and install it then open the file again. I've had this happen on multiple systems and versions of corel. I'm currently running X5 on Vista-64.
Just to clarify. When I open a file that I don't have the font installed for it will bring up a dialog box that says missing fonts. See screen shot below. The part that says install from Font Navigator is Grey and I can't select it no matter what. I have to take note of what fonts are missing then open font navigator, load them in and then re open the file. It worked fine a couple of weeks ago and then just quit.
I want to use Arabic font in corel draw x12.
View 1 Replies View RelatedI've been trying to insert new barcodes into a label document on Coral Draw and it comes up with an error message saying “Failed to create object. Make sure the object is entered in system registry”.
View 3 Replies View RelatedI've got a Draw document in RGB.
I added some paragraph text - just dragged a text frame and typed some in. Why is it CMYK?
I made a contour, one step, of a rectangle. Broke it apart. Why is this new rectangle's outline CMYK?