It's concerning the font SF Movie Poster
Two machines, both with XP, Corel Draw X3 13.0.0.576 and SF Movie Poster installed - BUT two different outputs.
Both Corels open the file and the characters with SF Movie Poster (I checked it by clicking in the words)
e.g. figure 1:
The first machine shows the number one as The other machine shows it like 1
I tried Nexus font (finally) and don't see why people have mentioned it. I don't like it and uninstalled it quickly.Which font manager do you think is better than Font Nav?
View 13 Replies View RelatedI want to use the font box, but all the font headings are dead - light gray. How can I turn them on and make them black / active?
View 5 Replies View RelatedI am new to Corel Draw. How do I arc font? I have a customer that wants some writting arced above her logo and below her logo. The only way I know how is to creat a circle and "Fit Text To Path". But then I can't seem to delete the circle without erasing the writting as well.
View 7 Replies View RelatedIf I create some text and change it from the default size (24 pt) to 14 pt and then rotate it, the size changes to the default point size (24 pt, I have even seen it do ~17.54)
Appears to have manifested with v16.4
It also squishes the text...
I have more than 1000 installed on an xp system. I know I don't need this many. I'm sure I could get by with 400 or less. How do you thin down your fonts? How many do you try to keep on your system?
What are you using for font management? Bit stream? Something else?
Current System: i3 3.07ghz, 3gb ram, Windows 7 32 bit with all updates and X6
I am trying to set the cut lines around a font that is an outline font and I can't get it to work - the outline just turns into the cut line and doesn't cut the font that I need.
View 14 Replies View RelatedI have had this problem since I loaded CorelDRAW X6 (64-bit) in June, 2012 but was busy learning all that was new since the ancient version running on my equally ancient Windows98 machine. Up until this point, I have tried all of the directions in the manual, this forum and on the website which includes, "Save Settings As Default". (These instructions do not differ from those I use in the old CD package only where I make them.)
These are the steps taken:
Open CorelDRAW X6 starting a new file.
Go to "Text Properties" Docker & choose the font, size, etc.
Under Tools, select "Save Settings As Default", close CDX6.
Technically, these steps should have saved the new font with associated choices for all future files until I change them again, but it does not. When I open a new or existing file, my new font changes do appear on the Text docker so I choose the outlined A on the toolbox bar, my choices are still showing on the Text docker and now, also on the Property bar. As soon as I click on the workspace where the flashing cursor awaits input, the text properties change to Arial, 24 pt, which has appeared since I first loaded the package. Should I redownload and reinstall the software? If so, where are the preference files so I can save them?
Scanned from a cap:
Let not the one who says it can't be done interrupt the one who is doing it.
My font navigator used to install the font automatically if I have it on the system but it wasn't installed. It has quit doing that. It tells me I'm missing the font then I have to manually go to the navigator and install it then open the file again. I've had this happen on multiple systems and versions of corel. I'm currently running X5 on Vista-64.
Just to clarify. When I open a file that I don't have the font installed for it will bring up a dialog box that says missing fonts. See screen shot below. The part that says install from Font Navigator is Grey and I can't select it no matter what. I have to take note of what fonts are missing then open font navigator, load them in and then re open the file. It worked fine a couple of weeks ago and then just quit.
I want to use Arabic font in corel draw x12.
View 1 Replies View RelatedIn Coreldrawx6 64bit when i resize the font, change the font in another type. How is possible this? This problem is typing measure in top toolbar, not if i resize manually. I post a sequence about this problem.
Figure 1) The text CdC is a Courier10 BT and Laboratory i Clarendon BT
Figure 2) I change measure in top and fonts change all graphic.
I want to import a font file to Corel X15.
View 2 Replies View RelatedI'm been trying to change this font to have three colors. The stars, the fill and the outline.
View 11 Replies View RelatedI've designed a simple graphic in X6 and printed directly to Roland ecosol printer. My black text doesn't show up on the print. I've spent a few hours and a lot of paper trying to figure this out.
The black text that isn't showing up is designed to be on top of a yellow box. When I print as intended, the text doesn't show. However, when I move the text off the box, it is printed and visible. Is it a document setup, color management, or print settings issue? Or none of the above?
I am looking into using CD X5 for my laser engraver, but I am running into a bit of a issue. I have to open PDFs into corel but when I do I lose all the spacing between each word. The font is not subsituted, there is no issue with opening it, and I can rip the file to the output device. I can edit the text by adding a space, I have double hit the space bar to make one space.
View 12 Replies View RelatedI have an existing font I I want to chop and change about eight characters of the font. The changes I need to make are very small slight change to the stand of the A.
I'm very new to corel draw - I have tried reading the tut's on creating your own font but I think it is a little overkill for me needs.
Can I convert an existing font to curves do the slight changes then export it as a TTF ?
Any way to change the font "codes" in suite 4 to the names used in the book we recieved when we purched the suite?
View 7 Replies View RelatedI would like to know the default font height setting in coreldraw 12. I want font size in millimeter rather than pt.
View 1 Replies View RelatedFor instance...I want to view all the fonts in wingdings without having to type every key on my keyboard.
View 4 Replies View RelatedI get this message when trying to use "What the Font" to identify a font.
The Hot Key is already being used by this System, please choose another one.
I have been using X3 for years, then decided to upgrade to 4 which I did, however I stopped using X4 as I could not see the Fonts display in the fly out box as they show blank so you can not see what the text would look like say in 'Bold' or 'Italic' or in a different font. I keep trying to sort it then I just go back to X3 but I really want to use X4 (I have X5 which does exactly the same thing.) I have looked at the 'Font settings' in X3 & compared to X4 checked and unchecked boxes, still no different. I did have X4 loaded on another old computer, which I uninstalled, thinking this may be the problem. Didn't change anything, so I have just uninstalled and reinstalled on the computer I am using now but still no good.
My operating system is still windows XP not sure if this is the cause?
where I can download a copy of Lorem ipsum font? or a good way to use it in corel draw?
View 2 Replies View RelatedAny font similar to "Cachet"?
Let not the one who says it can't be done interrupt the one who is doing it.
I do not have the option available to "use font navigator catalog on opening". All the buttons are grayed out CD X4 with SP1 and SP2 installed.
View 14 Replies View RelatedAny way to make a custom font menu in coreldraw. By that I mean a shorter font menu that doesnt have all the fonts available on the computer. Ny work PC probably has 2000 or so fonts on it. I really only use 10 or so on a regular basis. It would be awesome if I could have my own custom font list that I could load, and still be able to get to the complete list somehow if I need it. Maybe something like a folder in the font menu?
View 8 Replies View RelatedI have a problem getting my 'What the Font' tool to work - we got a couple of new computers in our art dept a few months ago and ever since then when trying to use this tool I get a message saying 'this hotkey is being used already by this system Please choose another one' , we do have other hotkeys set up for our system but on our older computers we never got this conflict running the same hotkeys.
View 12 Replies View RelatedI'm running on a fairly new Dell Studio laptop computer with Windows 7 Pro as the OS.The font was installed using the normal install font directions.
As stated above the font works fine in Adobe Illustrator and Microsoft Word.It shows as installed in Corel Draw font menu but will not print when trying to type, the curser just blinks.
I also have 2 desktop computers running Windows XP Pro OS where the font works perfectly in all programs.
I can't get the box to pop up where I can set the default size because I think I checked the box to not show it again. How to get it back?
View 4 Replies View RelatedAs I understand, sites like What The Font or What Font is are not effective in identifying script fonts.
I wonder if there is any alternative way to identify script fonts?
I have a customer trying to send a attachment with a particular font -- GlastonburyD -- and I am trying to explain the process on how to make such an attachment, I thought to ask the font gurus here if there is an alternate font that matches.
I can open the font in OpenOffice3 with the attached .docx she sent and it will display the font in the dropdown list, I, for the life of me, can not find a font folder anywhere in the program's file.
