CorelDRAW Graphics Suite X4 :: Font Flyout Are Blank
Jun 13, 2013
I have been using X3 for years, then decided to upgrade to 4 which I did, however I stopped using X4 as I could not see the Fonts display in the fly out box as they show blank so you can not see what the text would look like say in 'Bold' or 'Italic' or in a different font. I keep trying to sort it then I just go back to X3 but I really want to use X4 (I have X5 which does exactly the same thing.) I have looked at the 'Font settings' in X3 & compared to X4 checked and unchecked boxes, still no different. I did have X4 loaded on another old computer, which I uninstalled, thinking this may be the problem. Didn't change anything, so I have just uninstalled and reinstalled on the computer I am using now but still no good.
My operating system is still windows XP not sure if this is the cause?
View 14 Replies
ADVERTISEMENT
Jul 17, 2011
Font Flux Architect characters in normal and bold formats are displayed as blank squares, though italic and bold-italic format display them correctly. Print preview shows all formats correctly.
CorelDRAW X5 on Windows XP
View 13 Replies
View Related
Nov 12, 2013
Is there any way of modifying the Curve Flyout menu such that the Bézier tool becomes the default? (rather than the Freehand tool which I seldom use? I can't see where to do this in the Customize dialog.
View 10 Replies
View Related
Nov 29, 2012
menu.jpg
Is there any way to sort the Flyout Menus in alphabetical order?
View 15 Replies
View Related
Jan 5, 2013
I tried Nexus font (finally) and don't see why people have mentioned it. I don't like it and uninstalled it quickly.Which font manager do you think is better than Font Nav?
View 13 Replies
View Related
Jan 2, 2013
02012013010.jpg
Blank Blocks behind text and graphics
View 4 Replies
View Related
Oct 25, 2012
Just upgraded my X5 to X6. So far so good, except pop up menus are blank. See image below. Am I missing a setting somewhere, or is this a Windows XP Pro problem? I have my screen resolution set to the Corel recommended 1024x768.
View 7 Replies
View Related
Oct 12, 2011
I want to use the font box, but all the font headings are dead - light gray. How can I turn them on and make them black / active?
View 5 Replies
View Related
Jun 30, 2011
i have been working on this project in corel draw12 for several weeks now, as it is or/was coming to its final stages a few days ago it now only opens a blank page, it is 2.14 gb and it will get bigger as it reaches its final stages.i can still see it in preview. when it was opening it took a very long time to open i realise the reason for this is the size im using very high resolution images and designing and editing, or maybe there is another program that you may recommend that will support the size so i can complete my work.
i found a backup copy but it will not import the size is 1.70 gb seems its still too large to open ,
i don't think it has anything to do with memory , i have a full drive laptop is new. my thoughts are that corel draw will not open a file that size, and you are right about breaking it up i should have worked in several sheets but saved them desperately.
View 9 Replies
View Related
Apr 30, 2012
When I try to open an X5 template in X6, nothing happens in X6. I don't receive any error messages. It looks like the template is opening, but I just end up with a blank grey (no file opened) slate. I am using the 32-bit build. Everything else seems fine.
View 1 Replies
View Related
Jun 15, 2012
Got the "Cannot open a blank document" ERROR Message when I went to open a recently created Corel Draw X5 file. Using Windows 7 Professional.First time I've gotten this message.
View 1 Replies
View Related
Jun 9, 2011
I tried to open file's that I created recently in X3 and they will not open. when i try to open them they appears as blank page and they show nothing
all of my Cdr files be corrupted . they show their real size (eg 23mb ) but when i open them it show white page. Even the tumbnail pic shows only corel draw pencil and when i want open them on corel or import in it This error message appears : D: 01.cdr" is not importable using the selected filter, or this format is not supported
View 5 Replies
View Related
Sep 11, 2013
I am using Corel X3...I am trying to create a PDF in Corel X3 but the pdf is coming out blank? On smaller files they work out OK. I have re-sampled the images to make them smaller but it is not working? The file size is 31mb.I have made PDF's before and it is easy, but this is frustrating now. I have even uninstalled Corel and re-installed. Changed PDF generating programs too. I am now using Nitro Reader.
View 4 Replies
View Related
Apr 21, 2012
How do I get X5 to open with a new blank page as default?
If I enable the welcome screen it asks me what I want to open but if I disable it all I get is a grey area and I have to go to the drop down file menu ans select 'new page'.
View 3 Replies
View Related
Jun 27, 2013
Have some pics in X4 on Windows 7 but same are not opening in X 12/ Windows 8.
When copied from X4/Windows7 and pasted in X12/Windows 8, icon showing blank and on opening a blank document opens.
View 1 Replies
View Related
Jan 30, 2013
I have a custom palette set on two machines. If I save a file on one and then open it on the other, the second machine does not recognize the custom colors and leaves the object blank. I can click on the palette and correct this but can I set it so that the colors will load correctly when I open the files.
View 2 Replies
View Related
Apr 10, 2012
So I'm working on a website layout this morning with parts and pieces all over my artboard. I zoom out to 25% and everything on my artboard disappears. It's still there, just not visible. I did a little tinkering and it turns out the 27% and below has this effect.
I'm using CorelDaw X6 64-bit on Windows 7.
View 3 Replies
View Related
May 26, 2011
Error_CorelDrawa.jpg
when I create a new blank document, it size always become multiply of 10 (example Page size A4 = 2100mm x 2970mm) and in the document, when I draw a new object, it will automatical multiply with 10, too. I'm using Windows 7, and I never seen this problem before, when I using Windows XP!
View 8 Replies
View Related
Oct 20, 2011
When I try and publish a image or document to PDF it produces a blank PDF document.
I have tried using Bullzip PDF printer but that also produced a blank PDF.
View 4 Replies
View Related
Sep 8, 2011
It's concerning the font SF Movie Poster
Two machines, both with XP, Corel Draw X3 13.0.0.576 and SF Movie Poster installed - BUT two different outputs.
Both Corels open the file and the characters with SF Movie Poster (I checked it by clicking in the words)
e.g. figure 1:
The first machine shows the number one as The other machine shows it like 1
View 4 Replies
View Related
Apr 16, 2013
I am new to Corel Draw. How do I arc font? I have a customer that wants some writting arced above her logo and below her logo. The only way I know how is to creat a circle and "Fit Text To Path". But then I can't seem to delete the circle without erasing the writting as well.
View 7 Replies
View Related
Sep 10, 2013
If I create some text and change it from the default size (24 pt) to 14 pt and then rotate it, the size changes to the default point size (24 pt, I have even seen it do ~17.54)
Appears to have manifested with v16.4
It also squishes the text...
View 14 Replies
View Related
Nov 11, 2011
I have more than 1000 installed on an xp system. I know I don't need this many. I'm sure I could get by with 400 or less. How do you thin down your fonts? How many do you try to keep on your system?
What are you using for font management? Bit stream? Something else?
Current System: i3 3.07ghz, 3gb ram, Windows 7 32 bit with all updates and X6
View 8 Replies
View Related
Oct 5, 2011
I am trying to set the cut lines around a font that is an outline font and I can't get it to work - the outline just turns into the cut line and doesn't cut the font that I need.
View 14 Replies
View Related
Mar 30, 2013
I have had this problem since I loaded CorelDRAW X6 (64-bit) in June, 2012 but was busy learning all that was new since the ancient version running on my equally ancient Windows98 machine. Up until this point, I have tried all of the directions in the manual, this forum and on the website which includes, "Save Settings As Default". (These instructions do not differ from those I use in the old CD package only where I make them.)
These are the steps taken:
Open CorelDRAW X6 starting a new file.
Go to "Text Properties" Docker & choose the font, size, etc.
Under Tools, select "Save Settings As Default", close CDX6.
Technically, these steps should have saved the new font with associated choices for all future files until I change them again, but it does not. When I open a new or existing file, my new font changes do appear on the Text docker so I choose the outlined A on the toolbox bar, my choices are still showing on the Text docker and now, also on the Property bar. As soon as I click on the workspace where the flashing cursor awaits input, the text properties change to Arial, 24 pt, which has appeared since I first loaded the package. Should I redownload and reinstall the software? If so, where are the preference files so I can save them?
View 5 Replies
View Related
Apr 27, 2012
Scanned from a cap:
Let not the one who says it can't be done interrupt the one who is doing it.
View 5 Replies
View Related
Oct 17, 2012
My font navigator used to install the font automatically if I have it on the system but it wasn't installed. It has quit doing that. It tells me I'm missing the font then I have to manually go to the navigator and install it then open the file again. I've had this happen on multiple systems and versions of corel. I'm currently running X5 on Vista-64.
Just to clarify. When I open a file that I don't have the font installed for it will bring up a dialog box that says missing fonts. See screen shot below. The part that says install from Font Navigator is Grey and I can't select it no matter what. I have to take note of what fonts are missing then open font navigator, load them in and then re open the file. It worked fine a couple of weeks ago and then just quit.
View 11 Replies
View Related
Jun 9, 2013
I want to use Arabic font in corel draw x12.
View 1 Replies
View Related
Dec 20, 2013
In Coreldrawx6 64bit when i resize the font, change the font in another type. How is possible this? This problem is typing measure in top toolbar, not if i resize manually. I post a sequence about this problem.
Figure 1) The text CdC is a Courier10 BT and Laboratory i Clarendon BT
Figure 2) I change measure in top and fonts change all graphic.
View 3 Replies
View Related
Sep 7, 2011
I want to import a font file to Corel X15.
View 2 Replies
View Related
Oct 5, 2011
I'm been trying to change this font to have three colors. The stars, the fill and the outline.
View 11 Replies
View Related
