CorelDRAW Graphics Suite X5 :: Font Navigator
Oct 17, 2012
My font navigator used to install the font automatically if I have it on the system but it wasn't installed. It has quit doing that. It tells me I'm missing the font then I have to manually go to the navigator and install it then open the file again. I've had this happen on multiple systems and versions of corel. I'm currently running X5 on Vista-64.
Just to clarify. When I open a file that I don't have the font installed for it will bring up a dialog box that says missing fonts. See screen shot below. The part that says install from Font Navigator is Grey and I can't select it no matter what. I have to take note of what fonts are missing then open font navigator, load them in and then re open the file. It worked fine a couple of weeks ago and then just quit.
View 11 Replies
ADVERTISEMENT
Jan 31, 2012
I've always wondered, what does Bitstream Font Nav do, and why do I want to install it?
View 15 Replies
View Related
Oct 1, 2013
I removed Font Navigator before updating to version 16.4 because it didn't work well you know. But now I want to install it again.My system is 64 bit.
What if I install it from CD, because on CD there is the older not fixed version of FontNav and I don't know what to do next.How can I update it after installing it or I have to remove all Corel programs, reinstall them and update to 16.4?
View 2 Replies
View Related
May 10, 2012
I have a problem opening Font Navigator in Windows 7.
When I click the exe startup for Font Navigator Windows 7 asks if it's OK for this program to make changes to my computer. I answer yes, the screen flickers and Font Navigator fails to open.
This is a recent problem and I can't trace it to any changes on my PC. I have completely cleared Corel Suite from the computer and reloaded the applications.
View 7 Replies
View Related
Feb 19, 2013
What the little sun icon indicates on some of the installed fonts on Bitstream Font Navigator? I think they might be system fonts but I'm not sure.
I have too many fonts installed right now so I want to reduce that number but I don't want to cause a problem if those are required to stay in place.
View 3 Replies
View Related
Jun 19, 2013
Font Navigator stopped working correctly. Not showing any fonts. When will be update for this software?
View 4 Replies
View Related
Jan 5, 2013
I tried Nexus font (finally) and don't see why people have mentioned it. I don't like it and uninstalled it quickly.Which font manager do you think is better than Font Nav?
View 13 Replies
View Related
Oct 12, 2011
I want to use the font box, but all the font headings are dead - light gray. How can I turn them on and make them black / active?
View 5 Replies
View Related
Oct 9, 2012
I don't know what font navigator is for ? what excellently font navigator do?
View 6 Replies
View Related
Dec 14, 2012
I work with Corel X6 and Beatstream Navigator on regular basis. During start and save Corel & Beatstream make changes inside Windows system font (In my case Sagoe UI) and compromise it's usage for Adobe Photoshop CS6.
It's crash core menus and banners inside PS6.
Problem go away if you uninstall Bitstream Font Navigator.
Is there any other newer type manager or any other solution to solve this problem?
View 4 Replies
View Related
Oct 3, 2012
I put corel draw x3 on a new laptop with window 7 and the bitsteam font navigator will not work. Well actually it worked once, then when I went to add more fonts (find fonts) it just freezes up. I have uninstalled and re installed it and still have same problem. Never had this problem on windows xp.
View 2 Replies
View Related
Jan 26, 2012
The (X4) Font Navigator will not work in Windows 7. It is preventing files created on my office computer (windows XP) from opening on my home computer (windows 7)
View 5 Replies
View Related
Jul 28, 2011
So we have three computers hooked up here, all running off a main terabyte drive where all the fonts are stored. Bitstream, X3, and X5 are on all the computers. Bitstream works on 2 out of the 3, but on this one when I go to the drop down list in the Font Navigator I only get the option for the Local C and DVD drive. I can log on to the "Network" version of the terabyte drive, but once I get in it asks me for a password when the drive has not set up to be password protected. I have installed service pack 1 and 2 for X3 + the Bitstream patch. I'm running Windows 7.
View 3 Replies
View Related
Jun 24, 2011
When I click on the Font Navigator icon, the window opens, but there are no fonts anywhere.......it's empty !! When I click on View All Fonts, nothing happens . How do I get my installed fonts to show up in my Font Navigator?
View 13 Replies
View Related
Sep 8, 2011
It's concerning the font SF Movie Poster
Two machines, both with XP, Corel Draw X3 13.0.0.576 and SF Movie Poster installed - BUT two different outputs.
Both Corels open the file and the characters with SF Movie Poster (I checked it by clicking in the words)
e.g. figure 1:
The first machine shows the number one as The other machine shows it like 1
View 4 Replies
View Related
Apr 16, 2013
I am new to Corel Draw. How do I arc font? I have a customer that wants some writting arced above her logo and below her logo. The only way I know how is to creat a circle and "Fit Text To Path". But then I can't seem to delete the circle without erasing the writting as well.
View 7 Replies
View Related
Sep 10, 2013
If I create some text and change it from the default size (24 pt) to 14 pt and then rotate it, the size changes to the default point size (24 pt, I have even seen it do ~17.54)
Appears to have manifested with v16.4
It also squishes the text...
View 14 Replies
View Related
Nov 11, 2011
I have more than 1000 installed on an xp system. I know I don't need this many. I'm sure I could get by with 400 or less. How do you thin down your fonts? How many do you try to keep on your system?
What are you using for font management? Bit stream? Something else?
Current System: i3 3.07ghz, 3gb ram, Windows 7 32 bit with all updates and X6
View 8 Replies
View Related
Oct 5, 2011
I am trying to set the cut lines around a font that is an outline font and I can't get it to work - the outline just turns into the cut line and doesn't cut the font that I need.
View 14 Replies
View Related
Mar 30, 2013
I have had this problem since I loaded CorelDRAW X6 (64-bit) in June, 2012 but was busy learning all that was new since the ancient version running on my equally ancient Windows98 machine. Up until this point, I have tried all of the directions in the manual, this forum and on the website which includes, "Save Settings As Default". (These instructions do not differ from those I use in the old CD package only where I make them.)
These are the steps taken:
Open CorelDRAW X6 starting a new file.
Go to "Text Properties" Docker & choose the font, size, etc.
Under Tools, select "Save Settings As Default", close CDX6.
Technically, these steps should have saved the new font with associated choices for all future files until I change them again, but it does not. When I open a new or existing file, my new font changes do appear on the Text docker so I choose the outlined A on the toolbox bar, my choices are still showing on the Text docker and now, also on the Property bar. As soon as I click on the workspace where the flashing cursor awaits input, the text properties change to Arial, 24 pt, which has appeared since I first loaded the package. Should I redownload and reinstall the software? If so, where are the preference files so I can save them?
View 5 Replies
View Related
Apr 27, 2012
Scanned from a cap:
Let not the one who says it can't be done interrupt the one who is doing it.
View 5 Replies
View Related
Jun 9, 2013
I want to use Arabic font in corel draw x12.
View 1 Replies
View Related
Jul 31, 2011
It seems to work. How un-Corel-like.
CGSX5 on i3 PC, Win 7, 6G RAM.
The version that came with X4 worked in XP, but when I upgraded to Windows 7 it wouldn't install Type 1 fonts, and it wouldn't install any missing fonts when a file loaded. I buy Font Expert, though I never got it to work as well as the old FN.
But my new (trial) version of X5 has a version of the utility (v. 6.0.0, build 108) that seems to work just fine both ways. Thats a wonderful. When did this happen? There's a noticeable difference in the versions, according to xplorer2. X4's version:
and X5's:
I can no longer load X4's version; only v. 6.0.0 comes up, so I can't compare. But FN now works properly in X4, too, so Corel must have done something to address this. Cool.
View 1 Replies
View Related
Dec 20, 2013
In Coreldrawx6 64bit when i resize the font, change the font in another type. How is possible this? This problem is typing measure in top toolbar, not if i resize manually. I post a sequence about this problem.
Figure 1) The text CdC is a Courier10 BT and Laboratory i Clarendon BT
Figure 2) I change measure in top and fonts change all graphic.
View 3 Replies
View Related
Sep 7, 2011
I want to import a font file to Corel X15.
View 2 Replies
View Related
Oct 5, 2011
I'm been trying to change this font to have three colors. The stars, the fill and the outline.
View 11 Replies
View Related
Oct 24, 2013
I've designed a simple graphic in X6 and printed directly to Roland ecosol printer. My black text doesn't show up on the print. I've spent a few hours and a lot of paper trying to figure this out.
The black text that isn't showing up is designed to be on top of a yellow box. When I print as intended, the text doesn't show. However, when I move the text off the box, it is printed and visible. Is it a document setup, color management, or print settings issue? Or none of the above?
View 8 Replies
View Related
Oct 26, 2011
I am looking into using CD X5 for my laser engraver, but I am running into a bit of a issue. I have to open PDFs into corel but when I do I lose all the spacing between each word. The font is not subsituted, there is no issue with opening it, and I can rip the file to the output device. I can edit the text by adding a space, I have double hit the space bar to make one space.
View 12 Replies
View Related
Aug 24, 2011
I have an existing font I I want to chop and change about eight characters of the font. The changes I need to make are very small slight change to the stand of the A.
I'm very new to corel draw - I have tried reading the tut's on creating your own font but I think it is a little overkill for me needs.
Can I convert an existing font to curves do the slight changes then export it as a TTF ?
View 12 Replies
View Related
Jul 28, 2011
Any way to change the font "codes" in suite 4 to the names used in the book we recieved when we purched the suite?
View 7 Replies
View Related
Sep 26, 2013
I would like to know the default font height setting in coreldraw 12. I want font size in millimeter rather than pt.
View 1 Replies
View Related
