I saved a book a friend of mine worked on using coreldraw 12 on a cd and tried to open it in X6 but it won't open. I think My sys. Os is a 32 bit, I have a trial version of x6 on this comp. and full version 12 on another. When I ok convert to bitmap Error message says invalid file format.
View 1 Replies
I use Corel X5 and I don't have any problem.One of my suppliers use version X3.When I save files for this supplier, I saved them in version X3 format. But when he open the file, some graphics are missing.
I can't see where the problem come from. When I re-open the version X3 file with Corel X5, the file look fine and everything is there.The supplier keep saying that the problem is on my side. I asked him to upgrade to X5 as I think it should solve the problem.
I have a logo that was done for me but I would like to open it in Corel to do some tweaking but it won't open the ai or eps version of the file. I tried to post the file but its too big, If you can look at it send me a email at Hornnumb2 at Comcast dot Net and I will send it to you.
View 7 Replies View RelatedGot the "Cannot open a blank document" ERROR Message when I went to open a recently created Corel Draw X5 file. Using Windows 7 Professional.First time I've gotten this message.
View 1 Replies View RelatedSo, I've had CorelDraw X4 for maybe two years now. Everything has always worked fine.
Now, I can't get it to open new documents, and when it says it's "processing" to open old documents.. It doesn't really make any progress, and nothing every opens.
Then it will say that corel is not responding ...
I've really tried to figure this out on my own – you'd think it would be simple. At some early point, before I was at all familiar with CorelDRAW, I closed the document palette, and ever since then it does not open automatically when I start the program or open a document. I have had to open it manually, and I can't seem to find a way to make it open by default.
View 10 Replies View RelatedI have a file that was created in the online trial version of Corel Draw. How can I open it in my full version of X5? I'm getting an "invalid format" error message.
View 8 Replies View RelatedFor some reason a Document Color Palette doesn't appear by default when I create a new document. It did at one time, but now I have to manually activate it. Not sure what I did to cause this change in behavior, but I'd like to get it back as a default.
View 4 Replies View RelatedI downloaded and paid for the upgrade version of CorelDraw X6 because I have X3,X4 and X5. I have installed it already but I went to reinstall on my desktop PC as I wiped my hard drive back to factory state, CorelDRAW no longer gives the upgrade option.
On start up it gives the following message ( see below ) as a 30 day trial.
I am attempting to hyperlink from my CorelDraw file to a separate PDF. I want the link to work when I export my CorelDraw page to pdf, and I would like to be able to hyperlink to a different pdf file. A quick google search turned up a file:\ syntax to lead with in the hyperlink but I'm having trouble getting it to work.
View 4 Replies View RelatedIs there any way to lock or protect the image and text in a corel draw when you export as cdr, ai or pds. I need to give a document to a photoshop users but I don't want the person to be able to remove or export the image or copyright text line.
View 7 Replies View RelatedAt the bottom of Create a New Document is a box that says Do not show this dialog again. I checked it and now I don't know how to get it back.
View 7 Replies View RelatedI am using Corel X5 and need to save back to version 10 or 12. Even though I change the settings when I "save as" the file remains an X5. Unfortunately the engraving company I use cannot open the X5.
View 3 Replies View RelatedI'm trying to import into Coreldraw X3 files which were emailed to me by an Adobe CS4 user:
[URL]
(they are attached via a wetransfer link because as I found out the file size limit here is 256k and I cannot compress the files down to that size.) After reading several of the threads here, I'm not any smarter. I've tried various settings to import the .pdf, and regardless of which option I choose, I get a file corrupted error - it looks like the pdf version output to from Illustrator is flat out not supported by coreldraw. it opens fine in foxit reader, which tells me it's pdf 1.5 version.the .eps imports as a group of 542 objects but I cannot see any of these objects in the Object Manager docker.
I work at a design company and we just updated my system with version 6. I was previously working on 5 but when I pull items off of our server that were saved from my computer in version 5 it pops up a quick preview and then "Corel draw has stopped unexpectedly" However I can't just work from 5 because that's the reason why we upgraded my system to begin with. It was crashing out every 10 minutes (literally)
There's obviously a glitch here and it's starting to overwhelm me. We're on deadlines and I can't have my system crashing out. I need to be productive!
So in document color settings in color management, should the primary color mode be RGB or CMYK? I only print inkets and never send stuff out to a regular printer.
should all color settings be at RGB if the option is offered?
Yesterday, suddently when editing text in a document, clicking outside of the text edit, CDR crashes:
Runtime error!
Program: c:Program Fi...
This application has requested the Runtime to terminate it in an
unusual way.
Please contact the application's support team for more information.
I have tried to do the tricks, I googled, like resetting to factory, editing the xml file and running as administrator. Nothing works. It is when I edit any font, and in a new document also. AND update of CDR X4 with service pack 2 did not work.
I have a senior project within CorelDRAW X6 (Student) that spans around 1200 pages spread across about 25 different .CDRs. I need to export all of those pages as .JPEGs so I can manipulate them in another program.
I know that you can batch export using a macro. But I only need exactly what's on the page at the page size. My solution was to crop each page (yes, one by one) and then later do a batch export on all of them. However, when batch exporting to .JPEG, I noticed that I was getting different results than when I had exported pages individually in the past. At first I thought this was a macro issue. But when I was trying various things I realized that anytime I closed a document after cropping it, upon reopen my drop shadows would be gone. And of course, I didn't realize this until I had already cropped all 1200 pages and was doing my batch export. I've tested it and if I crop a document and then batch export the pages before closing the document I can get the results I need. But that would require me to crop all 1200 pages again and my time is running short.
(Ignore the color differences here...I'm fairly certain it's because I didn't pay attention to my color settings on export here) Export before closing via file converter macro:
Export after closing file and then batch exporting via macro:
Any macro for cropping to page size and then exporting to jpeg (or other format) all in one fell swoop? This would hopefully bypass this issue and save me the huge problem of having to crop them all again. I could just open each document and run the macro. In theory, that would be quick.
When I export or publish to pdf from CorelDraw X6 the document size changes.If lets say i export an A4 page and then inport it again the size of the page has changed from 210x297 to 209,903 x 296,686 !
View 4 Replies View RelatedWindows Vista 64, corel crashes on creating new document or opening existing one. It crashes twice actually. First crash spews out this:
Nazwa zdarzenia problemu: APPCRASH Nazwa aplikacji: CorelDRW.exe Wersja aplikacji: 16.0.0.707 Sygnatura czasowa aplikacji: 4f4c60a4 Nazwa modułu z błędem: MSVCR100.dll Wersja modułu z błędem: 10.0.40219.1 Sygnatura czasowa modułu z błędem: 4d5f034a Kod wyjątku: 40000015 Przesunięcie wyjątku: 00000000000761c9 Wersja systemu operacyjnego: 6.0.6002.2.2.0.256.6 Identyfikator ustawień regionalnych: 1045 Dodatkowe informacje 1: e139 Dodatkowe informacje 2: ed2429a1e405cd1a6fea3328235a733b Dodatkowe informacje 3: 08d2 Dodatkowe informacje 4: 7206fe9a4464dcae865f27c5d1766c68
second with this:
Nazwa zdarzenia problemu: APPCRASH Nazwa aplikacji: CorelDRW.exe Wersja aplikacji: 16.0.0.707 Sygnatura czasowa aplikacji: 4f4c60a4 Nazwa modułu z błędem: mfc100u.dll Wersja modułu z błędem: 10.0.40219.1 Sygnatura czasowa modułu z błędem: 4d5f1436 Kod wyjątku: c0000005 Przesunięcie wyjątku: 0000000000001b33 Wersja systemu operacyjnego: 6.0.6002.2.2.0.256.6 Identyfikator ustawień regionalnych: 1045 Dodatkowe informacje 1: 433d Dodatkowe informacje 2: c4f485ce7f6b39f48369e75a4a5c6af7 Dodatkowe informacje 3: f657 Dodatkowe informacje 4: bc294d6383f97effacd7dcb23980b3fe
Both are Visual C++ related as far as I can see. I have all the Visual C++ redistributables installed and up to date.
I got problems with pdf files in corel x3. When I want to save a large document pdf, it become a blank document when I open it with Adobe Reader.
View 3 Replies View RelatedHow do I save a file in X5 so it can be opened in X3?
View 9 Replies View RelatedI have a a ton of images I need down saved from Version X5 to X3. Is there any way to batch save CDR's and CSL's to a lower version besides opening up every one and saving?
View 9 Replies View Relatedi'm running on WIndows XP X64 SP3 AMD ATHLON II 64 - Mem 4Gb), i had install .net framework 4 and i've tried to install Corel Draw X6 64 bit on my system but the screen always shown the warning message "your system has been not modified, the processor in your computer does not meet the minimum system requirement". Is it because of Windows XP x64 or the processor?
View 7 Replies View RelatedWe have a vendor that is still using X3 or later. I currently have X4. Is there a way to default your save selection to save down a version?
View 4 Replies View RelatedIs there a way to set CGX6 to automatically save to a lower version (X5 X4 etc) without having to select the version manually each time I save a file?
View 2 Replies View RelatedI've been trying to insert new barcodes into a label document on Coral Draw and it comes up with an error message saying “Failed to create object. Make sure the object is entered in system registry”.
View 3 Replies View RelatedI've got a Draw document in RGB.
I added some paragraph text - just dragged a text frame and typed some in. Why is it CMYK?
I made a contour, one step, of a rectangle. Broke it apart. Why is this new rectangle's outline CMYK?
if I create a new document, say A4, and then import a TIFF photo to that document, the photo appears much larger than my background A4 document. So, do I edit my photo and then export it as a TIFF again, or should I resize my background document from A4 to match the size of my photo before exporting? What I'm asking is that I don't want to lose the original size of my TIFF image, so when I export my image will CD save the TIFF image in it's original size or resize it to that of my created A4 document?
View 1 Replies View RelatedI need to make a bunch of barcode tags for a client. I know CorelDraw isn't the best tool for this, but it's what I have and this is a one-time job.
To partially automate the process, I'm trying to use print merge to make the parts of the tags that aren't barcode, but I include the text that belongs in the barcode on the page. The print merge works correctly, I get what I expect. The next step would be to cut the barcode text, choose Insert Barcode, and then paste the barcode text into the barcode dialog.
Except, when trying to paste the text intended for the barcode I discovered that I was actually copying the <var1> field--not the text. I verified this by copying the "text" from the print merge document and then pasting back into the same document--what I got from the paste was not the expected text, but <var1>.
Since the barcode type I was using does not support the "<" character, it gave me an "invalid character" error.
My attempted solution was to publish to a PDF file and then import into a new document. This worked except for some reason CorelDraw makes a new layer named, inexplicably, "Layer 1" (there's a "Layer 1" by default, why make a second layer with the same name?) BUT when the import is done the new layer is NOT chosen in Object Manager, the original "Layer 1" is. Which means, when I go to copy the text and insert the barcode it ends up UNDER the other parts of the barcode tag which are on the NEW "Layer 1".
How can I get good faxed result after the graphic had been created and pasted to Words and Excel document? Even normal text in black would comes out faded not sharp.
View 4 Replies View Related
