CorelDRAW Graphics Suite X5 :: Import TIFF Photo To Document
Feb 20, 2012
if I create a new document, say A4, and then import a TIFF photo to that document, the photo appears much larger than my background A4 document. So, do I edit my photo and then export it as a TIFF again, or should I resize my background document from A4 to match the size of my photo before exporting? What I'm asking is that I don't want to lose the original size of my TIFF image, so when I export my image will CD save the TIFF image in it's original size or resize it to that of my created A4 document?
View 1 Replies
ADVERTISEMENT
Feb 10, 2012
In CD X5 is there a "PLACE" feature similar to what Illustrator has to import a PDF into a document without opening or checking for fonts. I've used the import feature in CD but that always scan the pdf for fonts and compatibility.
View 10 Replies
View Related
May 18, 2012
if I have a page of pics in a cdr, how can I export each one as its own stand alone tif? seems like I could do that at one time but now when I select an image and export it, it shows a weird dimensions size not like the image.
for example if I select a 5x7 image and export as a tif the dialog box shows it as 5.93 X 10.4 when the image is in fact 5x7.
View 1 Replies
View Related
Aug 25, 2011
we have just upgraded to x5 and now i have a big problem exporting tiff:
I work for print,not web. lets say i have a 50x50 cm layout. default dpi of document is set at 300. if i want to export that as a tif, it defaults at 300dpi in the export dialogue. until now, in x4, if i checked the maintain aspect ratio and just changed the dpi to lets say, 150dpi, it would only change the % of the size, not the actual size of the tif! now it changes somehow to double the size! but i want the same size to remain! also cm is selected, so no reason for it to keep the number of pixels!. i have to uncheck the maintain aspect and recheck it again to put the correct value in the size.
Also, i work with big documents, is there a way to stop previewing the jpegs in the export as jpg dialogue?
View 2 Replies
View Related
May 19, 2008
How to save as coreldraw file in .tiff format
View 6 Replies
View Related
Dec 19, 2011
I create a new black document with rendering resolution set to 150dpi.
If I export the artwork as JPEG, and check "Maintain Size", I'll get the artwork in correct dimension and resolution. However, if I export as TIFF, the resolution by default is 72dpi, and if I increase the resolution to 150dpi, the dimension reduces accordingly, ending up with a smaller bitmap exported.
View 5 Replies
View Related
Sep 22, 2011
One page of my drawing just will not export as any type of raster/tiff/bitmap. All the subsequent pages will happily export, but one page just will not. The export option defaults to 2% and 240cm height and width.
View 1 Replies
View Related
Aug 27, 2013
How to export multiple selections as each selection to export to tiff despite of single tiff.
View 2 Replies
View Related
May 1, 2012
1. How to fit properly A4 size Rectangle in the document? because after finish work when I converted the the cdr file to TIFF, it shows the image is not fit in the document and also the print does not comes out properly.
2. An other problem I have is, when I converted cdr file to TIFF and even JPEG, color of drop shadows which was black, is appears as a white color....what should I do? how to change the color setting?
View 16 Replies
View Related
Jun 17, 2012
I am having issues with the batch process function with X6 photopaint.
that is a simple conversion of 20 or more images from TIF to CPT. i get the message
"Images failed to load. Some formats are not supported for batch processing". I have never encountered this problem before.
View 4 Replies
View Related
May 28, 2012
This was exported to tif and sent to the printer, the glow is a white outer glow.
As I usually do I exported the whole thing to a TIF and low and behold black lines in the print.
This was the bullet proof way of getting what you saw on the screen to hadcopy but sadly no more.
Can this be addressed in SP1, as it puts a serious hole in all the signies bag of tricks for that matter any body who wants to output special EFX from Corel.
View 7 Replies
View Related
Nov 16, 2011
I'm using Coral Draw Graphics suite X5 built 15.2.0.686 SP4 (all available updates installed) This is a bug I have detected.
Start a new CorelDrawFile and import a .jpg,after putting e.q. some arrows on it I choose "export" and exports a .tif - file to a folder.
For further manipulations I also save the .cdr - file to another Folder. Insofar everything works well.But if I reopen the .cdr-file and do my manipulations at my picture and then I try to export the .tif - file to the folder, where the before exported .tif is situated, corel well notice that the old file exists and asks for replacement,BUT instead of exporting the .tif - file the .cdr file will be saved. Got this failure reproducible by doing it the same way.
not till I exported a other file type .jpg or any other and switches back to .tif, exporting the .tif file works and the old .tif - file will be replaced by the new one.
View 14 Replies
View Related
Aug 16, 2013
I came across an interesting problem. I was using PaintShop Pro to import a RAW image from my camera, then export as a TIF for use in CDGS X6. When I tried to import the file into CorelDRAW or PhotoPaint, I got an error message:
(X) Invalid compress data
I could see a thumbnail image in WIndows, and I could open the file in IrfanView. Re-saving the TIF from IrfanView allowed me to open it in CDGS.
I thought the problem was with PSP, and reported the issue to the product team, but then I tried exporting the same TIF from PhotoPaint (from the same RAW image file), and when I tried to re-open the TIF, I got the same error. So PhotoPaint could not read the TIF exported from... PhotoPaint!
Smaller files don't seem to be an issue, but my camera files are in the neighborhood of 5000x3000 pixels, and the TIF files weigh in at around 50MB.
View 7 Replies
View Related
Nov 13, 2013
I am attempting to hyperlink from my CorelDraw file to a separate PDF. I want the link to work when I export my CorelDraw page to pdf, and I would like to be able to hyperlink to a different pdf file. A quick google search turned up a file:\ syntax to lead with in the hyperlink but I'm having trouble getting it to work.
View 4 Replies
View Related
Jul 21, 2011
Is there any way to lock or protect the image and text in a corel draw when you export as cdr, ai or pds. I need to give a document to a photoshop users but I don't want the person to be able to remove or export the image or copyright text line.
View 7 Replies
View Related
Jan 6, 2012
At the bottom of Create a New Document is a box that says Do not show this dialog again. I checked it and now I don't know how to get it back.
View 7 Replies
View Related
Apr 4, 2013
So in document color settings in color management, should the primary color mode be RGB or CMYK? I only print inkets and never send stuff out to a regular printer.
should all color settings be at RGB if the option is offered?
View 2 Replies
View Related
Aug 15, 2012
Yesterday, suddently when editing text in a document, clicking outside of the text edit, CDR crashes:
Runtime error!
Program: c:Program Fi...
This application has requested the Runtime to terminate it in an
unusual way.
Please contact the application's support team for more information.
I have tried to do the tricks, I googled, like resetting to factory, editing the xml file and running as administrator. Nothing works. It is when I edit any font, and in a new document also. AND update of CDR X4 with service pack 2 did not work.
View 13 Replies
View Related
Jun 15, 2012
Got the "Cannot open a blank document" ERROR Message when I went to open a recently created Corel Draw X5 file. Using Windows 7 Professional.First time I've gotten this message.
View 1 Replies
View Related
May 29, 2013
I have a senior project within CorelDRAW X6 (Student) that spans around 1200 pages spread across about 25 different .CDRs. I need to export all of those pages as .JPEGs so I can manipulate them in another program.
I know that you can batch export using a macro. But I only need exactly what's on the page at the page size. My solution was to crop each page (yes, one by one) and then later do a batch export on all of them. However, when batch exporting to .JPEG, I noticed that I was getting different results than when I had exported pages individually in the past. At first I thought this was a macro issue. But when I was trying various things I realized that anytime I closed a document after cropping it, upon reopen my drop shadows would be gone. And of course, I didn't realize this until I had already cropped all 1200 pages and was doing my batch export. I've tested it and if I crop a document and then batch export the pages before closing the document I can get the results I need. But that would require me to crop all 1200 pages again and my time is running short.
(Ignore the color differences here...I'm fairly certain it's because I didn't pay attention to my color settings on export here) Export before closing via file converter macro:
Export after closing file and then batch exporting via macro:
Any macro for cropping to page size and then exporting to jpeg (or other format) all in one fell swoop? This would hopefully bypass this issue and save me the huge problem of having to crop them all again. I could just open each document and run the macro. In theory, that would be quick.
View 3 Replies
View Related
Dec 11, 2012
When I export or publish to pdf from CorelDraw X6 the document size changes.If lets say i export an A4 page and then inport it again the size of the page has changed from 210x297 to 209,903 x 296,686 !
View 4 Replies
View Related
Jun 1, 2012
Windows Vista 64, corel crashes on creating new document or opening existing one. It crashes twice actually. First crash spews out this:
Nazwa zdarzenia problemu: APPCRASH Nazwa aplikacji: CorelDRW.exe Wersja aplikacji: 16.0.0.707 Sygnatura czasowa aplikacji: 4f4c60a4 Nazwa modułu z błędem: MSVCR100.dll Wersja modułu z błędem: 10.0.40219.1 Sygnatura czasowa modułu z błędem: 4d5f034a Kod wyjątku: 40000015 Przesunięcie wyjątku: 00000000000761c9 Wersja systemu operacyjnego: 6.0.6002.2.2.0.256.6 Identyfikator ustawień regionalnych: 1045 Dodatkowe informacje 1: e139 Dodatkowe informacje 2: ed2429a1e405cd1a6fea3328235a733b Dodatkowe informacje 3: 08d2 Dodatkowe informacje 4: 7206fe9a4464dcae865f27c5d1766c68
second with this:
Nazwa zdarzenia problemu: APPCRASH Nazwa aplikacji: CorelDRW.exe Wersja aplikacji: 16.0.0.707 Sygnatura czasowa aplikacji: 4f4c60a4 Nazwa modułu z błędem: mfc100u.dll Wersja modułu z błędem: 10.0.40219.1 Sygnatura czasowa modułu z błędem: 4d5f1436 Kod wyjątku: c0000005 Przesunięcie wyjątku: 0000000000001b33 Wersja systemu operacyjnego: 6.0.6002.2.2.0.256.6 Identyfikator ustawień regionalnych: 1045 Dodatkowe informacje 1: 433d Dodatkowe informacje 2: c4f485ce7f6b39f48369e75a4a5c6af7 Dodatkowe informacje 3: f657 Dodatkowe informacje 4: bc294d6383f97effacd7dcb23980b3fe
Both are Visual C++ related as far as I can see. I have all the Visual C++ redistributables installed and up to date.
View 5 Replies
View Related
May 27, 2012
I saved a book a friend of mine worked on using coreldraw 12 on a cd and tried to open it in X6 but it won't open. I think My sys. Os is a 32 bit, I have a trial version of x6 on this comp. and full version 12 on another. When I ok convert to bitmap Error message says invalid file format.
View 1 Replies
View Related
Nov 30, 2011
I got problems with pdf files in corel x3. When I want to save a large document pdf, it become a blank document when I open it with Adobe Reader.
View 3 Replies
View Related
Sep 24, 2013
I've been trying to insert new barcodes into a label document on Coral Draw and it comes up with an error message saying “Failed to create object. Make sure the object is entered in system registry”.
View 3 Replies
View Related
Mar 31, 2012
I've got a Draw document in RGB.
I added some paragraph text - just dragged a text frame and typed some in. Why is it CMYK?
I made a contour, one step, of a rectangle. Broke it apart. Why is this new rectangle's outline CMYK?
View 14 Replies
View Related
Jul 19, 2012
I need to make a bunch of barcode tags for a client. I know CorelDraw isn't the best tool for this, but it's what I have and this is a one-time job.
To partially automate the process, I'm trying to use print merge to make the parts of the tags that aren't barcode, but I include the text that belongs in the barcode on the page. The print merge works correctly, I get what I expect. The next step would be to cut the barcode text, choose Insert Barcode, and then paste the barcode text into the barcode dialog.
Except, when trying to paste the text intended for the barcode I discovered that I was actually copying the <var1> field--not the text. I verified this by copying the "text" from the print merge document and then pasting back into the same document--what I got from the paste was not the expected text, but <var1>.
Since the barcode type I was using does not support the "<" character, it gave me an "invalid character" error.
My attempted solution was to publish to a PDF file and then import into a new document. This worked except for some reason CorelDraw makes a new layer named, inexplicably, "Layer 1" (there's a "Layer 1" by default, why make a second layer with the same name?) BUT when the import is done the new layer is NOT chosen in Object Manager, the original "Layer 1" is. Which means, when I go to copy the text and insert the barcode it ends up UNDER the other parts of the barcode tag which are on the NEW "Layer 1".
View 2 Replies
View Related
Sep 28, 2011
How can I get good faxed result after the graphic had been created and pasted to Words and Excel document? Even normal text in black would comes out faded not sharp.
View 4 Replies
View Related
May 27, 2013
I'm working with Corel Draw X6 and need to place sports cliparts in my document.
I opened the connect docker and found all the clipart files.
Problem : I only see the title which does not give a lot of information about the content of the clipart.
Question : What do I have to do to see the pictures?
View 10 Replies
View Related
Nov 6, 2011
So, I've had CorelDraw X4 for maybe two years now. Everything has always worked fine.
Now, I can't get it to open new documents, and when it says it's "processing" to open old documents.. It doesn't really make any progress, and nothing every opens.
Then it will say that corel is not responding ...
View 4 Replies
View Related
Aug 14, 2011
Just loaded Draw Graphics Sute X5 on a secondary computer running Vista. CDR file shows up correctly in print preview, but bitmap portions of document do not print.
View 2 Replies
View Related
