CorelDRAW Graphics Suite X5 :: TIFF Size Export
Aug 25, 2011
we have just upgraded to x5 and now i have a big problem exporting tiff:
I work for print,not web. lets say i have a 50x50 cm layout. default dpi of document is set at 300. if i want to export that as a tif, it defaults at 300dpi in the export dialogue. until now, in x4, if i checked the maintain aspect ratio and just changed the dpi to lets say, 150dpi, it would only change the % of the size, not the actual size of the tif! now it changes somehow to double the size! but i want the same size to remain! also cm is selected, so no reason for it to keep the number of pixels!. i have to uncheck the maintain aspect and recheck it again to put the correct value in the size.
Also, i work with big documents, is there a way to stop previewing the jpegs in the export as jpg dialogue?
View 2 Replies
ADVERTISEMENT
May 18, 2012
if I have a page of pics in a cdr, how can I export each one as its own stand alone tif? seems like I could do that at one time but now when I select an image and export it, it shows a weird dimensions size not like the image.
for example if I select a 5x7 image and export as a tif the dialog box shows it as 5.93 X 10.4 when the image is in fact 5x7.
View 1 Replies
View Related
Dec 19, 2011
I create a new black document with rendering resolution set to 150dpi.
If I export the artwork as JPEG, and check "Maintain Size", I'll get the artwork in correct dimension and resolution. However, if I export as TIFF, the resolution by default is 72dpi, and if I increase the resolution to 150dpi, the dimension reduces accordingly, ending up with a smaller bitmap exported.
View 5 Replies
View Related
Sep 22, 2011
One page of my drawing just will not export as any type of raster/tiff/bitmap. All the subsequent pages will happily export, but one page just will not. The export option defaults to 2% and 240cm height and width.
View 1 Replies
View Related
Aug 27, 2013
How to export multiple selections as each selection to export to tiff despite of single tiff.
View 2 Replies
View Related
Jan 9, 2012
I just upgraded to x5 and can no longer export a file as an eps and hold the custom page size. In x4 I could export as an eps to a custom page size of 2.5" by 2.5". Every time I try to upload the file it is seeing it as an 8.5' by 11". I am selecting page size in advanced tab
View 8 Replies
View Related
Mar 5, 2012
I have upgraded to X5 from X3 , and now when i Export EPS files, they are MASSIVE, I work in a company that does signs, and car vinyls and other graphics /vector related work, and It is important that i use EPS as file format for out " plotter" but a size of 800 mb and 2,2 GB now when it used to be 10 mb is insane.
I also use POSTSCRIPT 2, as 3, makes the file over 2 GBs.
View 14 Replies
View Related
Dec 11, 2012
When I export or publish to pdf from CorelDraw X6 the document size changes.If lets say i export an A4 page and then inport it again the size of the page has changed from 210x297 to 209,903 x 296,686 !
View 4 Replies
View Related
Nov 15, 2012
[ Bug ] Exporting to .GIF does not keep its original sizeThe checkbox 'Maintain Size' checked.
Result: importing that .GIF is 5 time size bigger.
View 2 Replies
View Related
Nov 27, 2013
I prepared my drawing for size A0 (841 mm / 1189 mm) but when exporting it in Jpg or Tiff format for printing, it happens something very strange. In the dialogue window it doesn't allow a bigger size than A1 (594 mm / 841 mm). It shows me 74 % for width and height parameters. I try to change it to 100 % but it turns back to 74. Now I cannot print it because I need the bigger size.
View 9 Replies
View Related
Oct 14, 2013
I am new to corel draw. i m using corel X6. i m having one arrow image (ie) 12px width and 23px height
I need the arrow in the same size with 24x24px transparent bg.
View 1 Replies
View Related
May 6, 2011
i make a design in coreldraw x5 and export to pdf but i don't know the seeting how i compress pdf file size...so then its size is too large.
View 1 Replies
View Related
Nov 26, 2012
I am creating my files in 5x. The final product will be a printed 8.5 x 11 calendar. The company requires 300dpi resolution, and a bleed size of 1/16".
Product 8.5" x 11" Calendar
Final Size 8.5" x 11"
Bleed Size 1/16"
Resolution to Submit 8.627" x 11.127", 2588 x 3338 px, 300dpi
My page is letter size.The image is a bitmap composed of numerous photographs and vector graphics.
I have saved them to a CMYK BITMAP 300DPI.In Corel the image reads as 11.125" x 8.625"
When I export to a pdf or jpg the image size changes to 11.293" x 8.796" which will not work for the printer. It sets the design elements outside the 'safe zone'.
View 6 Replies
View Related
May 19, 2008
How to save as coreldraw file in .tiff format
View 6 Replies
View Related
Feb 20, 2012
if I create a new document, say A4, and then import a TIFF photo to that document, the photo appears much larger than my background A4 document. So, do I edit my photo and then export it as a TIFF again, or should I resize my background document from A4 to match the size of my photo before exporting? What I'm asking is that I don't want to lose the original size of my TIFF image, so when I export my image will CD save the TIFF image in it's original size or resize it to that of my created A4 document?
View 1 Replies
View Related
May 1, 2012
1. How to fit properly A4 size Rectangle in the document? because after finish work when I converted the the cdr file to TIFF, it shows the image is not fit in the document and also the print does not comes out properly.
2. An other problem I have is, when I converted cdr file to TIFF and even JPEG, color of drop shadows which was black, is appears as a white color....what should I do? how to change the color setting?
View 16 Replies
View Related
Jun 17, 2012
I am having issues with the batch process function with X6 photopaint.
that is a simple conversion of 20 or more images from TIF to CPT. i get the message
"Images failed to load. Some formats are not supported for batch processing". I have never encountered this problem before.
View 4 Replies
View Related
May 28, 2012
This was exported to tif and sent to the printer, the glow is a white outer glow.
As I usually do I exported the whole thing to a TIF and low and behold black lines in the print.
This was the bullet proof way of getting what you saw on the screen to hadcopy but sadly no more.
Can this be addressed in SP1, as it puts a serious hole in all the signies bag of tricks for that matter any body who wants to output special EFX from Corel.
View 7 Replies
View Related
Nov 16, 2011
I'm using Coral Draw Graphics suite X5 built 15.2.0.686 SP4 (all available updates installed) This is a bug I have detected.
Start a new CorelDrawFile and import a .jpg,after putting e.q. some arrows on it I choose "export" and exports a .tif - file to a folder.
For further manipulations I also save the .cdr - file to another Folder. Insofar everything works well.But if I reopen the .cdr-file and do my manipulations at my picture and then I try to export the .tif - file to the folder, where the before exported .tif is situated, corel well notice that the old file exists and asks for replacement,BUT instead of exporting the .tif - file the .cdr file will be saved. Got this failure reproducible by doing it the same way.
not till I exported a other file type .jpg or any other and switches back to .tif, exporting the .tif file works and the old .tif - file will be replaced by the new one.
View 14 Replies
View Related
Aug 16, 2013
I came across an interesting problem. I was using PaintShop Pro to import a RAW image from my camera, then export as a TIF for use in CDGS X6. When I tried to import the file into CorelDRAW or PhotoPaint, I got an error message:
(X) Invalid compress data
I could see a thumbnail image in WIndows, and I could open the file in IrfanView. Re-saving the TIF from IrfanView allowed me to open it in CDGS.
I thought the problem was with PSP, and reported the issue to the product team, but then I tried exporting the same TIF from PhotoPaint (from the same RAW image file), and when I tried to re-open the TIF, I got the same error. So PhotoPaint could not read the TIF exported from... PhotoPaint!
Smaller files don't seem to be an issue, but my camera files are in the neighborhood of 5000x3000 pixels, and the TIF files weigh in at around 50MB.
View 7 Replies
View Related
May 17, 2013
Will Corel6 (or later) ever be able to export to a web page directly since the HTLM export doesn't work (drops links). The Corel Web program, or what ever its name is, was a joke. Its amazing that Corel work puts its name on a program that you could not open a CorelDraw file.
My current work around is to export to a JPG and then import that into dreamweaver and add the links there, then post. A pain but it works.
View 3 Replies
View Related
Mar 22, 2011
Export is weird, maintain size is checked but it dose not give the proper size. My page size is 922x1344, but the image exported is half that size.
View 14 Replies
View Related
Mar 18, 2012
why (sometimes) when I export text or graphics as .eps files to my cutter it cuts the same outline up to four to five times and ends up cutting right through the backing paper. I have been using postcut with various corel editions since 1997 with no problems until recently. It also cuts random lines through lines of text which is such an expensive pain in the ass.
I started to use the production manager in flexi sign to cut my designs and same thing happens, except for the random lines but it will make up to five cuts on some objects. All text and graphics are exported the same. Has something in corel newer versions changed in relation to this?
View 7 Replies
View Related
Jul 21, 2013
i´m using CRD since X3 so I think i´m quite experienced with all the crashes and uncompatibilities but now I have a problem which I can´t solve.
I made a graphic project which is quite large (2,6m x 2,0m @ 300dpi) and including raster grahics. The CDR file itself has about 400MB. When I tried to export this graphic to the png or jpg at the current size Corel X5 always crashes. I tried almost everything on many computers but always the same problem.
It looks like the project is too large for export. At this moment I desperately need to export the file to jpg or png at full resolution. Maybe X6 is more stable when exports or I have to simplify the project somehow but...
FILE IS UPLOADED here and I need to have it 2,6m x 2,0m: [URL]
View 4 Replies
View Related
Nov 9, 2011
I have a 900 x 500 px image in Adobe Illustrator, which overlaps a bit the canvas on the left side.
When I open this file with Corel, it adjusts my graphics so that it's centered on the screen. The AI file is centered on another point. Also, the canvas Corel creates is A4 sized. I always have to resize the canvas and then manually adjust the position of my graphics.
Question: How can I save an AI file so that when I open it at Corel, the position and size of the canvas will be exactly the same?
View 4 Replies
View Related
Dec 1, 2011
How on earth do you export bitmaps cropped to the size of the canvas? This seems like the simplest functionality ever but i can't get it to work. For example, I am designing an advert for use online. It needs to be 600px wide x 150px high. I may want to use a background image or a photo that when placed goes beyond the edge of the canvas. Logic dictates i would only want to export the canvas with a web image (otherwise why would i have set an exact number of pixels.) However, Corel insists on exporting everything on the canvas and desktop. Surely it should allow us to choose the bounding area of the exported bitmap.
Just to clarify what I mean, i've included a screen shot showing and example original graphic and the export result. I'm sure there must be an easy way to do this. If it's one like this i can crop it easily, but sometimes a print customer will ask me to send them, for example, a 32pp booklet we have designed for them with each page as a JPG and to crop each one manually is a right pain.
View 1 Replies
View Related
Jun 9, 2011
Client supplies me with word document, I make a PDF from it and then from Acrobat create an ESP file, this is done as an eps file is much less likely to cause probs then importing a PDF, I then print from the Coreldraw file with the EPS pages no problem. The problem then arises when I have to then create a PDF file from COreldraw for the client - any EPS files in the document do not appear in the PDF - so there lies the problem.I cannot alway directly import a PDF file (often screws up) even if I save fonts as outlines. Saving as EPS overcomes most/all issues.
View 3 Replies
View Related
Jun 10, 2011
how to export png from corel?
View 3 Replies
View Related
Aug 9, 2011
I made a vectorial shape with CorelDraw x3, and exported it as EPS. I can import it again with no problems, but when I try IMPORT using other software, the EPS file is readed truncated.. is a kind of shifted image.
Do you have any clue about that?
View 14 Replies
View Related
Oct 5, 2013
After upgrade from X4 to X6.4 noticed that AI export filter in version 7 is not present. It is very important - only ver 7 is readable for my software for laser machine and I really need this funkction. Maybe detail, but without this small point big X6.4 is like garbage
View 2 Replies
View Related
May 10, 2012
Im using draw x5 graphics software and want to know where to find useful for properly sizing web friendly graphics. I want to build a banner and an icon for my new site.
View 3 Replies
View Related
