CorelDRAW Graphics Suite X6 :: Getting Error Message When Exporting File As TIFF
Aug 16, 2013
I came across an interesting problem. I was using PaintShop Pro to import a RAW image from my camera, then export as a TIF for use in CDGS X6. When I tried to import the file into CorelDRAW or PhotoPaint, I got an error message:
(X) Invalid compress data
I could see a thumbnail image in WIndows, and I could open the file in IrfanView. Re-saving the TIF from IrfanView allowed me to open it in CDGS.
I thought the problem was with PSP, and reported the issue to the product team, but then I tried exporting the same TIF from PhotoPaint (from the same RAW image file), and when I tried to re-open the TIF, I got the same error. So PhotoPaint could not read the TIF exported from... PhotoPaint!
Smaller files don't seem to be an issue, but my camera files are in the neighborhood of 5000x3000 pixels, and the TIF files weigh in at around 50MB.
View 7 Replies
ADVERTISEMENT
Nov 16, 2011
I'm using Coral Draw Graphics suite X5 built 15.2.0.686 SP4 (all available updates installed) This is a bug I have detected.
Start a new CorelDrawFile and import a .jpg,after putting e.q. some arrows on it I choose "export" and exports a .tif - file to a folder.
For further manipulations I also save the .cdr - file to another Folder. Insofar everything works well.But if I reopen the .cdr-file and do my manipulations at my picture and then I try to export the .tif - file to the folder, where the before exported .tif is situated, corel well notice that the old file exists and asks for replacement,BUT instead of exporting the .tif - file the .cdr file will be saved. Got this failure reproducible by doing it the same way.
not till I exported a other file type .jpg or any other and switches back to .tif, exporting the .tif file works and the old .tif - file will be replaced by the new one.
View 14 Replies
View Related
Jan 23, 2010
I am using Corel Graphic Suite X3. I created one file of 330 MB. It contains text and images....
But now when i am opening this file it say "File contains Invalid Object" "IGNORE:ABORT:RETRY"..I chose every option but nothing seems to happen and corel draw gets hanged..I tried importing it..also i tried re installing it but nothing seem to work...
this file is very imp and i have to open it...Wht to do? Also any future precautions, if any?
And am i using the right version? Im mean is is because this is the lower version and i need 2 upgrade?
View 11 Replies
View Related
Jul 10, 2013
In CorelDraw X5, I consistently at times receive an error message stating "File Copy Error. TEMP Drive or Output Drive may be full". My temp drives have all been emptied. How to overcome this error message?
View 1 Replies
View Related
Dec 26, 2013
When I try to export an image I get the error "An error occurred when writing the property "Revision number" to the file". The file still exports but I would like to get rid of this error.
View 5 Replies
View Related
Jun 10, 2013
I have just started getting this message when I am using X-5
The message say's CorelDraw has stopped working and then it has the following,
problem event name APPCRASH
View 1 Replies
View Related
May 19, 2008
How to save as coreldraw file in .tiff format
View 6 Replies
View Related
Jan 13, 2011
I am trying to upload a file for a microstock site that requires an eps file under 8MB. As a cdr file, it is under 25KB but when I export the file as an eps it rockets to over 400,000KB.
View 14 Replies
View Related
Aug 29, 2011
When I draw an image on coreldraw 11, and save it as, or export it to a .plt file, it adds lord knows how many nodes, which creates issues for my plotter. How can I fix this issue? when drawing the images I use as little nodes as possible, but as soon as I export it or import it into artcut it has hundreds more nodes than I put in.
View 7 Replies
View Related
Jan 27, 2012
Is it possible?
CorelDraw X5 v. 15.2.0.686 Hot Fix 4 - Windows 7-64
View 1 Replies
View Related
May 9, 2011
KitchenCriativa_ai_sample.png
As part of a "kit", I need to export my files to 8 different file types. I've never really checked the .ai file type before as to how it appears. I did, however, tonight and found awful results. When I import my .ai file back in it looks awful. I'll post samples so you can see.... How to fix this on export? (How to upload both files so the one you see below is the result of the .ai export)
View 10 Replies
View Related
Feb 4, 2012
When exporting a file to jpeg the dialog box that normally appears and lets you select the quality of the jpeg is not popping up but the files saves but I now have no options in saving the file.
View 7 Replies
View Related
Apr 16, 2011
I am drawing pictures for the Second life game. I need that the file I export to be exactly 512 X 512 pixel, and TGA format. Of course, the objects in the picture are small, and don't use al the 512X512 space.But even when objects don't use all the space, I need my "small objects within the 512X512 size file.
Although my picture is, in corel draw 512 X 512, when I export to TGA , I have no the good results.I use yhe File/export/menu and define TGA Bitmap for format.
On the following menu,
if I click on "Maintain original size", Objects remains with original size, but the file size is reduced to fit around the objects..
If I click on "Maintain aspect ratio",, I can fix the size file to 512X512, , but the objects are streched to fill the 512X512 file.
The only way I found to avoid resizing is adding a 512X512 transparent object on the background, but I wonder if there is a better way to do it.
View 2 Replies
View Related
Mar 27, 2012
Is there a way to either save/export a vector file that can not be edited.
I know there are tracing programs available, but I want to make it as hard as can be so this logo will not get re-edited.
I designed it for a customer (belongs to us) they did not contract/pay us for it. We do all of their clothing. She is sponsoring an event and the event coordinator wants the logo to put it on their advertising. Just don't want it to end up on other clothes.
View 3 Replies
View Related
Apr 25, 2011
I have a major problem with PhotoPaint X5 after SP2. I have an image of a movie poster from internet. Let's say about 1000x1500 pixels. I make the width 300 px. (height will be 440 or more) Than I make a new document of 300x430 pixels. Copy and paste the first file into the second. Move it up and/or down with the arrow keys to have a good composition. Than I combine the image with the background (shift/control/arrow down) and save it to rest.jpg. When I want to close the original image in CorelPaint I get the Corel A.R.M. window. I tried a few times without combining the image to the background and than I CAN close the file without crashing PP. I'm glad I found a workaround since I do these actions quit a lot for my movie and music database. But it took a lot a time to figure out where it went wrong. So according to my tests it must have something to do with combining the image to the background. Sometime when nudging the image a couple of times up and down crashses PP too when I then combine the image and background. At that point i don't come a far as exporting.
View 9 Replies
View Related
Aug 24, 2011
I am working with a device that can import plt files & it converts that to a tool path in G-Code. works like a champ. but some data, most text (single line font), is converted two times. This makes the tool do the work twice and its pretty inconvenient to manually delete the doubled up G-Code Lines.
I am pretty sure the duplication is done at the Corel export level and not in the translator of the machine. I have been working with the export settings with no success.
View 2 Replies
View Related
Aug 29, 2011
I am getting an error and crash when trying to publish to pdf file in X5.
View 3 Replies
View Related
Jan 9, 2009
I'm using Coreldraw X3,operating system, Windows XP Professional version 2002, 1GB of RAM,free space of 4.56GB on C drive, 34.8GB on backup drive,display adapter Radeon X300,HP compaq dc7600 convertibleI'm having a lot of difficulties opening a series of files. I had been working on a laptop for a few months and upon returning to the office I tansfered the files to my desktop to complete thr final revisions. I worked on my desktop for 3wks without no problems and then one day I went to open the files and recieved this message on all of them:"Error reading a bitmap in file"I have since tried numerous methods with no success.
View 13 Replies
View Related
Oct 19, 2012
I've recently encounterd a problem while trying to export images out of Lightroom 4. I keep getting an error messge "File canot be written." This is happening whether I'm exporting a Jpeg or a raw file. Cannot figure what has happend but it's doing it with old and new files, so it's not an issue of a corrupted file.
View 1 Replies
View Related
Aug 5, 2013
I've a problem to open an old X4-Coreldraw file. The first time I can open it - when I want to save this file CDraw says that the file will be changed to the X6 Version. I say OK and save the file. The 2nd time I'll try to open the X6 file again then the Error occurs! I changed my settings in CDraw to a local dir c: emp, also to a new drive - but nothing happens! All the drives have mor than 400 GB free space! I hope this will be enough.
View 14 Replies
View Related
Mar 9, 2012
i'm trying to edit a Catalog (PDF format) which i generated using a Report Writer.
Err- Internal Filter Error.
The 1st time round, i didn't get this error. I edited the PDF with some graphics,etc..
I then made some changes to the report using Report Writer & now it's NOT opening.
View 1 Replies
View Related
May 18, 2012
if I have a page of pics in a cdr, how can I export each one as its own stand alone tif? seems like I could do that at one time but now when I select an image and export it, it shows a weird dimensions size not like the image.
for example if I select a 5x7 image and export as a tif the dialog box shows it as 5.93 X 10.4 when the image is in fact 5x7.
View 1 Replies
View Related
Aug 25, 2011
we have just upgraded to x5 and now i have a big problem exporting tiff:
I work for print,not web. lets say i have a 50x50 cm layout. default dpi of document is set at 300. if i want to export that as a tif, it defaults at 300dpi in the export dialogue. until now, in x4, if i checked the maintain aspect ratio and just changed the dpi to lets say, 150dpi, it would only change the % of the size, not the actual size of the tif! now it changes somehow to double the size! but i want the same size to remain! also cm is selected, so no reason for it to keep the number of pixels!. i have to uncheck the maintain aspect and recheck it again to put the correct value in the size.
Also, i work with big documents, is there a way to stop previewing the jpegs in the export as jpg dialogue?
View 2 Replies
View Related
Dec 1, 2011
How on earth do you export bitmaps cropped to the size of the canvas? This seems like the simplest functionality ever but i can't get it to work. For example, I am designing an advert for use online. It needs to be 600px wide x 150px high. I may want to use a background image or a photo that when placed goes beyond the edge of the canvas. Logic dictates i would only want to export the canvas with a web image (otherwise why would i have set an exact number of pixels.) However, Corel insists on exporting everything on the canvas and desktop. Surely it should allow us to choose the bounding area of the exported bitmap.
Just to clarify what I mean, i've included a screen shot showing and example original graphic and the export result. I'm sure there must be an easy way to do this. If it's one like this i can crop it easily, but sometimes a print customer will ask me to send them, for example, a 32pp booklet we have designed for them with each page as a JPG and to crop each one manually is a right pain.
View 1 Replies
View Related
Dec 19, 2011
I create a new black document with rendering resolution set to 150dpi.
If I export the artwork as JPEG, and check "Maintain Size", I'll get the artwork in correct dimension and resolution. However, if I export as TIFF, the resolution by default is 72dpi, and if I increase the resolution to 150dpi, the dimension reduces accordingly, ending up with a smaller bitmap exported.
View 5 Replies
View Related
Feb 20, 2012
if I create a new document, say A4, and then import a TIFF photo to that document, the photo appears much larger than my background A4 document. So, do I edit my photo and then export it as a TIFF again, or should I resize my background document from A4 to match the size of my photo before exporting? What I'm asking is that I don't want to lose the original size of my TIFF image, so when I export my image will CD save the TIFF image in it's original size or resize it to that of my created A4 document?
View 1 Replies
View Related
Sep 22, 2011
One page of my drawing just will not export as any type of raster/tiff/bitmap. All the subsequent pages will happily export, but one page just will not. The export option defaults to 2% and 240cm height and width.
View 1 Replies
View Related
Aug 27, 2013
How to export multiple selections as each selection to export to tiff despite of single tiff.
View 2 Replies
View Related
May 1, 2012
1. How to fit properly A4 size Rectangle in the document? because after finish work when I converted the the cdr file to TIFF, it shows the image is not fit in the document and also the print does not comes out properly.
2. An other problem I have is, when I converted cdr file to TIFF and even JPEG, color of drop shadows which was black, is appears as a white color....what should I do? how to change the color setting?
View 16 Replies
View Related
Jun 17, 2012
I am having issues with the batch process function with X6 photopaint.
that is a simple conversion of 20 or more images from TIF to CPT. i get the message
"Images failed to load. Some formats are not supported for batch processing". I have never encountered this problem before.
View 4 Replies
View Related
May 28, 2012
This was exported to tif and sent to the printer, the glow is a white outer glow.
As I usually do I exported the whole thing to a TIF and low and behold black lines in the print.
This was the bullet proof way of getting what you saw on the screen to hadcopy but sadly no more.
Can this be addressed in SP1, as it puts a serious hole in all the signies bag of tricks for that matter any body who wants to output special EFX from Corel.
View 7 Replies
View Related
