CorelDRAW Graphics Suite X6 :: Exporting Image - Error When Writing Property To File

Dec 26, 2013

When I try to export an image I get the error "An error occurred when writing the property "Revision number" to the file".  The file still exports but I would like to get rid of this error.

View 5 Replies


ADVERTISEMENT

CorelDRAW Graphics Suite X6 :: Getting Error Message When Exporting File As TIFF

Aug 16, 2013

I came across an interesting problem. I was using PaintShop Pro to import a RAW image from my camera, then export as a TIF for use in CDGS X6. When I tried to import the file into CorelDRAW or PhotoPaint, I got an error message:

(X) Invalid compress data

I could see a thumbnail image in WIndows, and I could open the file in IrfanView. Re-saving the TIF from IrfanView allowed me to open it in CDGS.

I thought the problem was with PSP, and reported the issue to the product team, but then I tried exporting the same TIF from PhotoPaint (from the same RAW image file), and when I tried to re-open the TIF, I got the same error. So PhotoPaint could not read the TIF exported from... PhotoPaint!

Smaller files don't seem to be an issue, but my camera files are in the neighborhood of 5000x3000 pixels, and the TIF files weigh in at around 50MB.

View 7 Replies View Related

CorelDRAW Graphics Suite 12 :: Writing Batch File Process?

Sep 30, 2011

I have a subroutine i wrote that works fine.Just not sure how to turn it into a batch processor so i can apply it to all the files in a directory. And would I just run it like i run the non-batch version, like, from a document? Or is there some kind of batch process setup in corel where I can just load a sub and point to a folder and run it, like illustrator?

View 8 Replies View Related

CorelDRAW Graphics Suite X5 :: Way To Change Property Of 15 File To Make It Open In 14?

Dec 23, 2011

I used the trail version of 15 to create files. I found a good deal on 14 and bought that. However none of my 15 files will open in 14. Is there a way to change the property of the 15 file to make it open in 14?

View 12 Replies View Related

CorelDRAW Graphics Suite X3 :: Exporting As EPS File

Jan 13, 2011

I am trying to upload a file for a microstock site that requires an eps file under 8MB.  As a cdr file, it is under 25KB but when I export the file as an eps it rockets to over 400,000KB.

View 14 Replies View Related

CorelDRAW Graphics Suite 12 :: Exporting Image Files

Oct 10, 2011

I am fairly inexperienced using Corel. I work with Corel in a technical capacity for my job. We use it to transform DXF (AutoCAD) files into image files that can then be imported into another very specialized program for weaving. 

The problem I am having is this. I would like to be able to export image files from corel that have a specified height, in pixels, larger than 10,000. In the woven program, the pixels of the incoming drawing have a real, physical representation. Namely, the number of pixels wide and high in the drawing translates directly into the number of yarns wide and high in a woven cloth repeat (weft (pick count) and warp (end count) for those who are familiar). We have some designs that require the length be longer than the 10,000 limit, and until recently we have been working around this by resizing ("scaling") the image without keeping the aspect ratio in the woven image editing program. This does ok, but when the lines and curves in the drawing get "stretched," they become very uneven and this is frustrating.

We cannot use jpg file formats because when the lines and curves of a dxf file are converted to an image and then exported from corel as a jpg, the lines do not remain smooth and complete. In other words, they become a series of standalone dots. This severely complicates working with the image in other steps. Currently, our standard is to use .tif files, and .bmp files also seem to work. However, neither seems to allow the exportation of images in excess of 10,000 pixels long.

Is there a different way we could be creating these images in order to get the type of accuracy we are looking for? DXF files have to be successfully made into image files that maintain the proportions set out in AutoCAD and which also are longer than 10,000 pixels.

View 2 Replies View Related

CorelDRAW Graphics Suite 12 :: When Exporting To JPG / Most Of Image Disappears

Apr 20, 2011

every time I export my cdr file to a jpg, all but a small portion of the picture disappear. I've tried saving it in other formats and a few other things, but none have been successful. I've included print screens of what the picture should look like, what it does look like, and the export setting I've been using.

View 5 Replies View Related

CorelDRAW Graphics Suite X6 :: Crops Image When Exporting?

Jun 2, 2013

When I create a document on CD x6, I make it look just like I want it (some background showing around edges, under main content), but when I export it to an image file, it always crops it to the smallest possible size. Why is this, and how can I fix it?

See images below... 1st is what it looks like in CD, and 2nd is the exported image

View 7 Replies View Related

CorelDRAW Graphics Suite 11 :: Saving / Exporting To PLT File

Aug 29, 2011

When I draw an image on coreldraw 11, and save it as, or export it to a .plt file, it adds lord knows how many nodes, which creates issues for my plotter. How can I fix this issue? when drawing the images I use as little nodes as possible, but as soon as I export it or import it into artcut it has hundreds more nodes than I put in.

View 7 Replies View Related

CorelDRAW Graphics Suite X5 :: PP Exporting Each Object In Different File

Jan 27, 2012

Is it possible?

CorelDraw X5 v. 15.2.0.686 Hot Fix 4 - Windows 7-64

View 1 Replies View Related

CorelDRAW Graphics Suite X5 :: Exporting To AI File Type

May 9, 2011

KitchenCriativa_ai_sample.png

As part of a "kit", I need to export my files to 8 different file types.  I've never really checked the .ai file type before as to how it appears.  I did, however, tonight and found awful results.  When I import my .ai file back in it looks awful.  I'll post samples so you can see.... How to fix this on export?  (How to upload both files so the one you see below is the result of the .ai export)

View 10 Replies View Related

CorelDRAW Graphics Suite X6 :: Exporting To Bitmap Image Size?

Jan 30, 2013

I exported a graphic as a 600 dpi bitmap. However the saved image is 600.125 dpi. Why the non-whole number size? And how can I export to a whole number? I get either 600.xxx or 599.xxx.

View 3 Replies View Related

CorelDRAW Graphics Suite X6 :: Changing JPG Resolution When Exporting Image

May 25, 2012

Been a CorelDraw user for a long time. Just installed x6 (previous X4), and tried to export an image to jpg. X6 seems to have this dialog box with all these presets. How do I manually set my resolution, pixels, etc. as in the previous versions?

View 4 Replies View Related

CorelDRAW Graphics Suite X5 :: Exporting File To JPEG - Dialog Box Not Popping Up

Feb 4, 2012

When exporting a file to jpeg the dialog box that normally appears and lets you select the quality of the jpeg is not popping up but the files saves but I now have no options in saving the file. 

View 7 Replies View Related

CorelDRAW Graphics Suite X5 :: Resizing File Or Objects When Exporting On TGA Format?

Apr 16, 2011

I am drawing pictures for the Second life game. I need that the file I export to  be exactly 512 X 512 pixel, and TGA format. Of course, the objects in the picture are small, and don't use al the 512X512 space.But even when objects don't use all the space, I need my "small objects within the 512X512 size file.

Although my picture is, in corel draw 512 X 512, when I export to TGA  , I have no the good results.I use yhe File/export/menu and define TGA Bitmap for format. 

On the following menu,

if I click on "Maintain original size", Objects remains  with original size, but the file size  is reduced to fit around the objects..

If I click on "Maintain aspect ratio",, I can fix the size file to 512X512, , but the objects are streched to fill the 512X512 file.

The only way I found to avoid resizing  is adding  a 512X512 transparent object on the background, but I wonder if there is a better way to do it.

View 2 Replies View Related

CorelDRAW Graphics Suite X5 :: Saving / Exporting A Vector File That Is Uneditable

Mar 27, 2012

Is there a way to either save/export a vector file that can not be edited.

I know there are tracing programs available, but I want to make it as hard as can be so this logo will not get re-edited.

I designed it for a customer (belongs to us) they did not contract/pay us for it.  We do all of their clothing.  She is sponsoring an event and the event coordinator wants the logo to put it on their advertising.  Just don't want it to end up on other clothes.

View 3 Replies View Related

CorelDRAW Graphics Suite X5 :: Crashed (Corel ARM) When After Exporting JPG Close The File

Apr 25, 2011

I have a major problem with PhotoPaint X5 after SP2. I have an image of a movie poster from internet. Let's say about 1000x1500 pixels. I make the width 300 px. (height will be 440 or more) Than I make a new document of 300x430 pixels. Copy and paste the first file into the second. Move it up and/or down with the arrow keys to have a good composition. Than I combine the image with the background (shift/control/arrow down) and save it to rest.jpg. When I want to close the original image in CorelPaint I get the Corel A.R.M. window. I tried a few times without combining the image to the background and than I CAN close the file without crashing PP. I'm glad I found a workaround since I do these actions quit a lot for my movie and music database. But it took a lot a time to figure out where it went wrong. So according to my tests it must have something to do with combining the image to the background. Sometime when nudging the image a couple of times up and down crashses PP too when I then combine the image and background. At that point i don't come a far as exporting.

View 9 Replies View Related

CorelDRAW Graphics Suite X5 :: Fail While Exporting TIFF And Saves CDR File Instead

Nov 16, 2011

I'm using Coral Draw Graphics suite X5 built 15.2.0.686 SP4 (all available updates installed) This is a bug I have detected.

Start a new CorelDrawFile and import a .jpg,after putting e.q. some arrows on it I choose "export" and exports a .tif - file to a folder.

For further manipulations I also save the .cdr - file to another Folder. Insofar everything works well.But if I reopen the .cdr-file and do my manipulations at my picture and then I try to export the .tif - file to the folder, where the before exported .tif is situated, corel well notice that the old file exists and asks for replacement,BUT instead of exporting the .tif - file the .cdr file will be saved. Got this failure reproducible by doing it the same way.

not till I exported a other file type .jpg or any other and switches back to .tif, exporting the .tif file works and the old .tif - file will be replaced by the new one.

View 14 Replies View Related

CorelDRAW Graphics Suite X5 :: Exporting PLT File Creates Double Line Translation

Aug 24, 2011

I am working with a device that can import plt files & it converts that to a tool path in G-Code.  works like a champ.  but some data, most text (single line font), is converted two times.  This makes the tool do the work twice and its pretty inconvenient to manually delete the doubled up G-Code Lines.

I am pretty sure the duplication is done at the Corel export level and not in the translator of the machine.  I have been working with the export settings with no success.

View 2 Replies View Related

CorelDRAW Graphics Suite X5 :: Error Publishing To PDF File

Aug 29, 2011

I am getting an error and crash when trying to publish to pdf file in X5.

View 3 Replies View Related

CorelDRAW Graphics Suite X5 :: Transform Property Bar

Apr 18, 2012

I know I am able to transform and object by typing feet (') and inches(") ex. 5' 6" but is it possible to display both? I know I can get it to display feet or inches but it always completes with a decimal. Is there a work around for this?

View 7 Replies View Related

CorelDRAW Graphics Suite X5 :: Create Writing In Center Of Heart In Sand?

Aug 8, 2012

the best way I can create writing in the center of this heart in the sand?

[URL]

Trying to get the words Ocean City in 2 lines and have it look as close as possible to look like it was written in the sand (without me having to drive an hour to the beach and make one myself and photograph it) although it is tempting to do!

View 8 Replies View Related

CorelDRAW Graphics Suite X3 :: Error Reading Bitmap In File?

Jan 9, 2009

I'm using Coreldraw X3,operating system, Windows XP Professional version 2002, 1GB of RAM,free space of 4.56GB on C drive, 34.8GB on backup drive,display adapter Radeon X300,HP compaq dc7600 convertibleI'm having a lot of difficulties opening a series of files. I had been working on a laptop for a few months and upon returning to the office I tansfered the files to my desktop to complete thr final revisions. I worked on my desktop for 3wks without no problems and then one day I went to open the files and recieved this message on all of them:"Error reading a bitmap in file"I have since tried numerous methods with no success.

View 13 Replies View Related

CorelDRAW Graphics Suite X6 :: Bar In Spot Color Property Box

Nov 14, 2013

What the "Bar" in spot color property box means?

View 3 Replies View Related

CorelDRAW Graphics Suite X3 :: Error Message - File Contains Invalid Objects?

Jan 23, 2010

I am using Corel Graphic Suite X3. I created one file of 330 MB. It contains text and images....

But now when i am opening this file it say "File contains Invalid Object" "IGNORE:ABORT:RETRY"..I chose every option but nothing seems to happen and corel draw gets hanged..I tried importing it..also i tried re installing it but nothing seem to work...

this file is very imp and i have to open it...Wht to do? Also any future precautions,  if any?

And am i using the right version? Im mean is is because this is the lower version and i need 2 upgrade?

View 11 Replies View Related

CorelDRAW Graphics Suite X6 :: Copy Fill Property Of Gradients

Apr 26, 2012

When i copy the property using the copy fill property dialog box the gradients are not copying exactly, see the video 

[URL].......

View 2 Replies View Related

CorelDRAW Graphics Suite X6 :: Error Copying File - TEMP / Drive Full

Aug 5, 2013

I've a problem to open an old X4-Coreldraw file. The first time I can open it - when I want to save this file CDraw says that the file will be changed to the X6 Version. I say OK and save the file. The 2nd time I'll try to open the X6 file again then the Error occurs! I changed my settings in CDraw to a local dir c: emp, also to a new drive - but nothing happens! All the drives have mor than 400 GB free space! I hope this will be enough.

View 14 Replies View Related

CorelDRAW Graphics Suite X5 :: Error While Opening PDF File Generated Using Report Writer?

Mar 9, 2012

i'm trying to edit a Catalog (PDF format) which i generated using a Report Writer.

Err-  Internal Filter Error.

The 1st  time round, i didn't get this error.  I edited the PDF with some graphics,etc..

I then made some changes to the report using  Report Writer & now it's NOT opening.

View 1 Replies View Related

CorelDRAW Graphics Suite X4 :: Drop Shadow Property Bar Attributes Disappears?

May 19, 2011

X4. When I add a drop shadow to anything the variable attributes do not appear on the property bar, ie "flat bottom right" at top left and then the choice of colours etc. I know by now where they are so click on where I think they are, but it's annoying. I have deleted, run a reg cleaner and re-installed + added the SP2 updates.

View 3 Replies View Related

CorelDRAW Graphics Suite X5 :: TEMP Drive Full And File Copy Error Message?

Jul 10, 2013

In CorelDraw X5, I consistently at times receive an error message stating "File Copy Error. TEMP Drive or Output Drive may be full". My temp drives have all been emptied. How to overcome this error message?

View 1 Replies View Related

CorelDRAW Graphics Suite X4 :: How To Tell File Size Of Image

Mar 7, 2011

How to tell the file size of an image when in corel? 

I have some big files that slow the computer down when working on them.  Can I some how tell how big a picture is within corel draw.. ie   It would be nice to be able to right click on a picture that I have imported into the workspace and it show me how many mega bytes it is. 

Then I can go through my files and delete the larger pcs and make them smaller.

As it is now, I have to pretty much delete them all and start again to find dthe few pics that are like 3-5mb in size.

View 14 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved