When exporting a file to jpeg the dialog box that normally appears and lets you select the quality of the jpeg is not popping up but the files saves but I now have no options in saving the file.
View 7 RepliesI am finding when exporting my work in CorelDraw x6 as a JPEG that the size increases to something much larger.
I just want my work as a high quality jpg of 300dpi at the size i have drawn it!
When I export an image from CorelDraw to a jpeg, or png, (or probably anything for that matter) and try to use it in my web design program I get the little 1 pixel wide white line. WTH? I then have to take it into corel photo paint and erase that one pixel line, in order for it to be gone.
I've used Corel Draw since version 4 I think and this problem has existed in every version Corel has put out. I like the product, I find it easy to use but this glitch is maddening.
For some reason I am having problems exporting .CDR's to .JPG - I am using a custom page layout, 12x10" in landscape and have basically created 4 images with a 1" border around them by means of setting the page background to a plain colour and importing a .JPG to the desired size. This worked fine for two of my images, but, for some reason the other 2 images will not save as a 12 x 10 sized image, which means the 'border' is cropped on the two sides.
It's hair pulling out time for me as I have done the same process for two of the prints, but the other two will not stop cropping themselves in the export process.
I am new to X4 and cannot seem to get rid of the white background when I export a vector to a jpg file. This is probably a no brainier but I have tried setting the page background to none and a few other things but to no avail.
View 4 Replies View RelatedAfter finally getting X6 to be stable and usable I have two things I'd like to mention..
First, I've been using a 3rd party file manager called Ztree for years and one of its most wonderful capabilities is to copy paths to the clipboard which alleviates opening/saving frustrations with the typical Windoze Explorer dialogs. Anyway, one of the first problems I noticed with X6 is that Paste no longer works in the Open Drawing dialog, while it worked just fine in X5 and as far as I can remember, all previous versions. I sure would like to get that back.
My second complaint is the File/Export routine and specifically the presets. I do a lot of exporting to PNG and JPG and use multiple presets for fixed size/print resolution image output in both file formats. During the typical export session, I essentially export multiple different drawings all of which are exactly the same size/resolution in CD and in the past (X4 and prior as I recall,) was able to just hit <Enter> when the Export dialog appeared once the preset was set to the one I needed for that session.
In X6 though (and to some degree in X5,) even though the correct preset is listed, CD doesn't appear to recognize it, i.e., the math for the size/dpi conversion doesn't take place which forces me to waste time selecting "Original" or some other preset first, waiting for CD to render the new version, and THEN selecting the conversion preset that was pre-selected when I first opened the export dialog.
CorelDraw X5 (German Version 15.0.2.0695):I've installed Corel X5 under Windows 7 Ultimate 64 Bit.
When I try to set up my ppd-file in the printer dialog window, I can chose the ppd-file but the OK-button (öffnen) doesn't work. Clicking by mouse or by Enter button at the keyboard: nothing happens, the ppd-file won't be accepted. It seams the OK-button is out of any function in this window.
I am trying to upload a file for a microstock site that requires an eps file under 8MB. As a cdr file, it is under 25KB but when I export the file as an eps it rockets to over 400,000KB.
View 14 Replies View RelatedWhen I draw an image on coreldraw 11, and save it as, or export it to a .plt file, it adds lord knows how many nodes, which creates issues for my plotter. How can I fix this issue? when drawing the images I use as little nodes as possible, but as soon as I export it or import it into artcut it has hundreds more nodes than I put in.
View 7 Replies View RelatedIs it possible?
CorelDraw X5 v. 15.2.0.686 Hot Fix 4 - Windows 7-64
KitchenCriativa_ai_sample.png
As part of a "kit", I need to export my files to 8 different file types. I've never really checked the .ai file type before as to how it appears. I did, however, tonight and found awful results. When I import my .ai file back in it looks awful. I'll post samples so you can see.... How to fix this on export? (How to upload both files so the one you see below is the result of the .ai export)
I've created a poster on corel draw x5 and I want to save it into a jpeg file, how can I do this? I have tried opening the file in corel photo paint but it loses some of the effects I have added.
Also, I want to be able to upload the poster on my website but being new to that as well how do I get the poster web ready?
Corel X5 is getting better but Im having trouble making my files to jpeg, last version (X4) you can make your own percentage on making jpeg, right now, I dont know what kind of jpeg will I choose to make my file print on any medium. the choices are only Highest, High (80%), medium (50%) low (20%) and lowest at 0%, every time I choose some and make it CMYK version, the file was damaged and discoloration, how can I do it on coreldraw 15 like what im doing last time on coreldraw 14.
View 2 Replies View RelatedI am drawing pictures for the Second life game. I need that the file I export to be exactly 512 X 512 pixel, and TGA format. Of course, the objects in the picture are small, and don't use al the 512X512 space.But even when objects don't use all the space, I need my "small objects within the 512X512 size file.
Although my picture is, in corel draw 512 X 512, when I export to TGA , I have no the good results.I use yhe File/export/menu and define TGA Bitmap for format.
On the following menu,
if I click on "Maintain original size", Objects remains with original size, but the file size is reduced to fit around the objects..
If I click on "Maintain aspect ratio",, I can fix the size file to 512X512, , but the objects are streched to fill the 512X512 file.
The only way I found to avoid resizing is adding a 512X512 transparent object on the background, but I wonder if there is a better way to do it.
Is there a way to either save/export a vector file that can not be edited.
I know there are tracing programs available, but I want to make it as hard as can be so this logo will not get re-edited.
I designed it for a customer (belongs to us) they did not contract/pay us for it. We do all of their clothing. She is sponsoring an event and the event coordinator wants the logo to put it on their advertising. Just don't want it to end up on other clothes.
I have a major problem with PhotoPaint X5 after SP2. I have an image of a movie poster from internet. Let's say about 1000x1500 pixels. I make the width 300 px. (height will be 440 or more) Than I make a new document of 300x430 pixels. Copy and paste the first file into the second. Move it up and/or down with the arrow keys to have a good composition. Than I combine the image with the background (shift/control/arrow down) and save it to rest.jpg. When I want to close the original image in CorelPaint I get the Corel A.R.M. window. I tried a few times without combining the image to the background and than I CAN close the file without crashing PP. I'm glad I found a workaround since I do these actions quit a lot for my movie and music database. But it took a lot a time to figure out where it went wrong. So according to my tests it must have something to do with combining the image to the background. Sometime when nudging the image a couple of times up and down crashses PP too when I then combine the image and background. At that point i don't come a far as exporting.
View 9 Replies View RelatedI'm using Coral Draw Graphics suite X5 built 15.2.0.686 SP4 (all available updates installed) This is a bug I have detected.
Start a new CorelDrawFile and import a .jpg,after putting e.q. some arrows on it I choose "export" and exports a .tif - file to a folder.
For further manipulations I also save the .cdr - file to another Folder. Insofar everything works well.But if I reopen the .cdr-file and do my manipulations at my picture and then I try to export the .tif - file to the folder, where the before exported .tif is situated, corel well notice that the old file exists and asks for replacement,BUT instead of exporting the .tif - file the .cdr file will be saved. Got this failure reproducible by doing it the same way.
not till I exported a other file type .jpg or any other and switches back to .tif, exporting the .tif file works and the old .tif - file will be replaced by the new one.
I came across an interesting problem. I was using PaintShop Pro to import a RAW image from my camera, then export as a TIF for use in CDGS X6. When I tried to import the file into CorelDRAW or PhotoPaint, I got an error message:
(X) Invalid compress data
I could see a thumbnail image in WIndows, and I could open the file in IrfanView. Re-saving the TIF from IrfanView allowed me to open it in CDGS.
I thought the problem was with PSP, and reported the issue to the product team, but then I tried exporting the same TIF from PhotoPaint (from the same RAW image file), and when I tried to re-open the TIF, I got the same error. So PhotoPaint could not read the TIF exported from... PhotoPaint!
Smaller files don't seem to be an issue, but my camera files are in the neighborhood of 5000x3000 pixels, and the TIF files weigh in at around 50MB.
I have recently upgraded to X6 from X3. After design work I would export the file to jpeg for client approval. I used Apple Mail 5.2 to attach the jpeg file but my problem is the client cannot open the file. It just turns out blank with a little cross. I cannot figure out what is the problem during the export process. I have no problem at all with X3.
View 9 Replies View RelatedI am working with a device that can import plt files & it converts that to a tool path in G-Code. works like a champ. but some data, most text (single line font), is converted two times. This makes the tool do the work twice and its pretty inconvenient to manually delete the doubled up G-Code Lines.
I am pretty sure the duplication is done at the Corel export level and not in the translator of the machine. I have been working with the export settings with no success.
When I try to export an image I get the error "An error occurred when writing the property "Revision number" to the file". The file still exports but I would like to get rid of this error.
View 5 Replies View RelatedI've recently got a new computer, and after installing corel on it, I've found that I am unable to open files with corel, as soon as i press the open button corel crashes, but i am able to open the files when i goto the actual file in my documents and click open in there, and i am unable to save files any way whatsoever (due to crashing isues again) i am also unable to export my artwork to a jpeg, also an immediate crash.
View 8 Replies View RelatedHow on earth do you export bitmaps cropped to the size of the canvas? This seems like the simplest functionality ever but i can't get it to work. For example, I am designing an advert for use online. It needs to be 600px wide x 150px high. I may want to use a background image or a photo that when placed goes beyond the edge of the canvas. Logic dictates i would only want to export the canvas with a web image (otherwise why would i have set an exact number of pixels.) However, Corel insists on exporting everything on the canvas and desktop. Surely it should allow us to choose the bounding area of the exported bitmap.
Just to clarify what I mean, i've included a screen shot showing and example original graphic and the export result. I'm sure there must be an easy way to do this. If it's one like this i can crop it easily, but sometimes a print customer will ask me to send them, for example, a 32pp booklet we have designed for them with each page as a JPG and to crop each one manually is a right pain.
Transitioning to CD X6 while try to get work done is a chore. I just loaded the real CD X6 box version. It deleted the downloaded test version. But now I made a new poster and I am using Ctrl-E to export it and there is no Export Dialog box. It just saves the JPG in what it thinks I need!! How do I get the Export Dialog box back to control the parameters of my Export?
View 1 Replies View RelatedNoticed the mis-alignment that occurs in some of Corel's dialog boxes? For example in the New Document dislogs (both Draw and Photo Paint). The Draw dialog looks like this on my machine:
Notice how the labels are out of line with the dialog controls - e.g. the label "Preview Mode" is much higher than the drop-down list it belongs to - way out of alignment. Also, notice how the 'Height' and 'Width' spinners cut off the second 'm'. It's the same situation with Photo Paint too.I mention this because in the Scott Georgeson Video Tutorials, his New Document dialog boxes are not misaligned
We have CorelDRAW Graphics Suite X5 installed on a Windows XP SP3 32-bit machine and when attempting to export a CorelDRAW file to anything (i.e. JPG), the applications crashes after the export dialog box opens. This happens for any file we try to export.
We have reset the workspace using F8, but it did not resolve the issue.
Exporting the same file in CorelDRAW X4 or even X3 works perfectly, this is only an issue with X5.
what I want to achieve is a jpg image, with one of my vector designs over the top of it, for use on a website.
This is how I have been doing things so far. Opening cdr file, containing the vector that i wish to use importing the image, then reducing its size positioning the vector over the top of the image adding perspective to the vector selecting both using the pick tool (dragging the selection square around both items) then selecting export for web.
This has worked for dozens of pictures so far. The problem is, my exported file is way too big, at 900kb. However, if I just export the image, it is 39kb. If i just export the vector, it is 25 kb. Yet when I export both it comes up at 900.
currently getting by with v11 on winXP..Having a recent problem which I hope one of you can identify. I undoubtedly caused this problem myself by while trying to set up multiple monitors with different screen resolutions, dpi's, font viewing sizes, etc... but now I don't know exactly what setting caused it or how to get back to normal.
Here's the problem - two dialog boxes are displaying very skewed as shown in the screen-shots below. It's only these two dialogs I seem to have trouble with. It's like their popup windows are wrong proportions. No settings I change in my monitor setups seem to correct the situation.
I print spot color separations using CorelDraw a lot. Just ungraded from X3 to X5. One problem I am having is in the printing dialog. When a file has, say, 4 colors showing up in the separations section I may only want to print 2 or three of them. I deselect the ones I don't want - but all 4 seps come out. I am wasting a lot of expensive separations.
View 3 Replies View RelatedHow do I go about saving the settings on the open dialog box? It keeps moving to different locations and it keeps changing the Name / Date modified / Type / Size columns very narrow where it only shows the name and nothing else.
I do have the dialog box very large across so it can accommodate what I want including the preview.
We are using Coral Draw 11 and have to get a lot of our data from Excel. Currently we are copying and pasting the information in, but this is very time consuming. Is there a faster and simplier method?
View 4 Replies View Related