Transitioning to CD X6 while try to get work done is a chore. I just loaded the real CD X6 box version. It deleted the downloaded test version. But now I made a new poster and I am using Ctrl-E to export it and there is no Export Dialog box. It just saves the JPG in what it thinks I need!! How do I get the Export Dialog box back to control the parameters of my Export?
View 1 RepliesWe have CorelDRAW Graphics Suite X5 installed on a Windows XP SP3 32-bit machine and when attempting to export a CorelDRAW file to anything (i.e. JPG), the applications crashes after the export dialog box opens. This happens for any file we try to export.
We have reset the workspace using F8, but it did not resolve the issue.
Exporting the same file in CorelDRAW X4 or even X3 works perfectly, this is only an issue with X5.
After finally getting X6 to be stable and usable I have two things I'd like to mention..
First, I've been using a 3rd party file manager called Ztree for years and one of its most wonderful capabilities is to copy paths to the clipboard which alleviates opening/saving frustrations with the typical Windoze Explorer dialogs. Anyway, one of the first problems I noticed with X6 is that Paste no longer works in the Open Drawing dialog, while it worked just fine in X5 and as far as I can remember, all previous versions. I sure would like to get that back.
My second complaint is the File/Export routine and specifically the presets. I do a lot of exporting to PNG and JPG and use multiple presets for fixed size/print resolution image output in both file formats. During the typical export session, I essentially export multiple different drawings all of which are exactly the same size/resolution in CD and in the past (X4 and prior as I recall,) was able to just hit <Enter> when the Export dialog appeared once the preset was set to the one I needed for that session.
In X6 though (and to some degree in X5,) even though the correct preset is listed, CD doesn't appear to recognize it, i.e., the math for the size/dpi conversion doesn't take place which forces me to waste time selecting "Original" or some other preset first, waiting for CD to render the new version, and THEN selecting the conversion preset that was pre-selected when I first opened the export dialog.
Noticed the mis-alignment that occurs in some of Corel's dialog boxes? For example in the New Document dislogs (both Draw and Photo Paint). The Draw dialog looks like this on my machine:
Notice how the labels are out of line with the dialog controls - e.g. the label "Preview Mode" is much higher than the drop-down list it belongs to - way out of alignment. Also, notice how the 'Height' and 'Width' spinners cut off the second 'm'. It's the same situation with Photo Paint too.I mention this because in the Scott Georgeson Video Tutorials, his New Document dialog boxes are not misaligned
I was trying to get white on my open color pallets and inadvertently messed them up and got something named "defrgb.xml" with a blank box and now I can't get any color pallets to come up. I have even uninstalled and re-installed to no avail. How do I get this situation back to normal?
View 1 Replies View RelatedSince installing the X6 Trial I have lost the images for my cdr and cpt thumbnails. I haven't decided to upgrade yet but would like my thumbnails images back in the meantime. Do I do a repair with X5?
View 6 Replies View RelatedI had recently downloaded CorelDraw 6 upgrading from CorelDraw3. I'm guessing that the CD6 automatically converted all my files that were CD3 to CD6...Any who...I decided that I like corel draw 3 better and redownloaded it. Now I can't open my CD3 files now..Even though my files says CD3 I still can't open them.
What can I do?
How do I get a particular layer to appear at the back of the page in draw X5?
I need to convert text to curves but when I make the non text layer visible after doing so it pops to the front.
currently getting by with v11 on winXP..Having a recent problem which I hope one of you can identify. I undoubtedly caused this problem myself by while trying to set up multiple monitors with different screen resolutions, dpi's, font viewing sizes, etc... but now I don't know exactly what setting caused it or how to get back to normal.
Here's the problem - two dialog boxes are displaying very skewed as shown in the screen-shots below. It's only these two dialogs I seem to have trouble with. It's like their popup windows are wrong proportions. No settings I change in my monitor setups seem to correct the situation.
CorelDraw X5 (German Version 15.0.2.0695):I've installed Corel X5 under Windows 7 Ultimate 64 Bit.
When I try to set up my ppd-file in the printer dialog window, I can chose the ppd-file but the OK-button (öffnen) doesn't work. Clicking by mouse or by Enter button at the keyboard: nothing happens, the ppd-file won't be accepted. It seams the OK-button is out of any function in this window.
I print spot color separations using CorelDraw a lot. Just ungraded from X3 to X5. One problem I am having is in the printing dialog. When a file has, say, 4 colors showing up in the separations section I may only want to print 2 or three of them. I deselect the ones I don't want - but all 4 seps come out. I am wasting a lot of expensive separations.
View 3 Replies View RelatedHow do I go about saving the settings on the open dialog box? It keeps moving to different locations and it keeps changing the Name / Date modified / Type / Size columns very narrow where it only shows the name and nothing else.
I do have the dialog box very large across so it can accommodate what I want including the preview.
how to work cereldraw x3 i was going fine with all my work then it just went white when i tried to do something not sure what and now i dont know how to get it back to normal i cans elect my work but cant see any of it
View 2 Replies View RelatedAcceleration in the Contour Docker is back to front (or is it just me) ie. Object Acceleration accelerates Colour and Colour accelerates Object.
View 3 Replies View RelatedLike the other posts Ive read in this Forum i did play with the workspace
now the Tools is gone and i don't know a way to bring it back
tried the PF8 trick a few times it says the workspace is back but no tools in the bar
I'm on the X6 trial why i'm waiting for my x6 delivery. How to get the tools back into the bar
Will Corel6 (or later) ever be able to export to a web page directly since the HTLM export doesn't work (drops links). The Corel Web program, or what ever its name is, was a joke. Its amazing that Corel work puts its name on a program that you could not open a CorelDraw file.
My current work around is to export to a JPG and then import that into dreamweaver and add the links there, then post. A pain but it works.
When exporting a file to jpeg the dialog box that normally appears and lets you select the quality of the jpeg is not popping up but the files saves but I now have no options in saving the file.
View 7 Replies View Relatedhow to send graphic in vector from coreldraw x86 to photopaint x86 directly via application launcher
( change it in eg. eye candy ), then send back in bitmaps just by closing PP.
eye candy x86 issue ( i coppied this: libmmd.dll to system32 and C:Program Files (x86)Alien SkinEye Candy 7
too ( dll file is from here, not sure if its for x86 [URL]
This time, my color palette that was on the right side of my screen is gone. How do I get it back on there?
View 3 Replies View RelatedI use Print Preview in X4 for all printing - great tool.
When I use Print Preview in X6 the print options are not saved when I exit Print Preview to make adjustments.
I make the correction - go back into Print Preview and all options have gone back to default. Is there anyway of correcting this.
why (sometimes) when I export text or graphics as .eps files to my cutter it cuts the same outline up to four to five times and ends up cutting right through the backing paper. I have been using postcut with various corel editions since 1997 with no problems until recently. It also cuts random lines through lines of text which is such an expensive pain in the ass.
I started to use the production manager in flexi sign to cut my designs and same thing happens, except for the random lines but it will make up to five cuts on some objects. All text and graphics are exported the same. Has something in corel newer versions changed in relation to this?
i´m using CRD since X3 so I think i´m quite experienced with all the crashes and uncompatibilities but now I have a problem which I can´t solve.
I made a graphic project which is quite large (2,6m x 2,0m @ 300dpi) and including raster grahics. The CDR file itself has about 400MB. When I tried to export this graphic to the png or jpg at the current size Corel X5 always crashes. I tried almost everything on many computers but always the same problem.
It looks like the project is too large for export. At this moment I desperately need to export the file to jpg or png at full resolution. Maybe X6 is more stable when exports or I have to simplify the project somehow but...
FILE IS UPLOADED here and I need to have it 2,6m x 2,0m: [URL]
In my image adjustment dialog (photopaint X5 Brightness/Contrast/Intensity) the image is far too small.
The actual image is about 5.5" x 2.8" and in normal view is fine. when I open the dialog to adjust the whole image is collapsed into a few pixels.
I have shutdown and restarted Photopaint but the problem is still the same.
Editing text with the Edit Text Dialog inserts a carriage return at the beginning of the text when the dialog is closed.
View 3 Replies View RelatedI use Corel Draw X5 while at work and to do the particular task needed I have to have the stroke set to COLOR: RED, and WIDTH: HAIRLINE, MILLIMETERS. How to set the program to jump to these settings as a default upon opening all files.
View 2 Replies View RelatedOkay so I'm having issues with the text tabbing in X6 ,the tabs are set and double checked before it goes out for printing but when its printed some tabs just jump back to the edge. This also happens when the text box is updated(moved or re-sized). We have been having multiple problems with x6 now for a while , we have done the start with factory settings, which has only resolved previous issues temporarily as after a while the problem would reoccur. X5 never had these problems.
View 5 Replies View RelatedI just tried to open a CorelDRAW document on my other computer where I'm obviously missing one of the document's fonts.
Problem:
The CorelDRAW font substitution dialog does not list the missing fonts:
Thus, it's impossible to install them to get the document working as expected.x.
CorelDRAW Graphic Suite X6.4 @ Windows 7/Windows 8 - 64 Bit, Windows Server 2008 R2, Windows Server 2012
Client supplies me with word document, I make a PDF from it and then from Acrobat create an ESP file, this is done as an eps file is much less likely to cause probs then importing a PDF, I then print from the Coreldraw file with the EPS pages no problem. The problem then arises when I have to then create a PDF file from COreldraw for the client - any EPS files in the document do not appear in the PDF - so there lies the problem.I cannot alway directly import a PDF file (often screws up) even if I save fonts as outlines. Saving as EPS overcomes most/all issues.
View 3 Replies View RelatedDoes your install count reset back to three annually? This question is for X4 and above as well.
View 4 Replies View Relatedhow to export png from corel?
View 3 Replies View RelatedI made a vectorial shape with CorelDraw x3, and exported it as EPS. I can import it again with no problems, but when I try IMPORT using other software, the EPS file is readed truncated.. is a kind of shifted image.
Do you have any clue about that?