CorelDRAW Graphics Suite X3 :: Export Text Or Graphics As EPS Files - Vinyl Cutting?

Mar 18, 2012

why (sometimes) when I export text or graphics as .eps files to my cutter it cuts the same outline up to four to five times and ends up cutting right through the backing paper. I have been using postcut with various corel editions since 1997 with no problems until recently. It also cuts random lines through lines of text which is such an expensive pain in the ass.

I started to use the production manager in flexi sign to cut my designs and same thing happens, except for the random lines but it will make up to five cuts on some objects. All text and graphics are exported the same. Has something in corel newer versions changed in relation to this?

View 7 Replies


ADVERTISEMENT

CorelDRAW Graphics Suite 12 :: Color Separations For Vinyl Cutting

Jul 4, 2011

I have a Roland SP54 with VersaWorks.

I design everything in CorelDraw and want to know how one goes about doing a color separation for cutting just the vinyl,

E.g. I have a 3 color design that I need to cut 3 different color sheets of vinyl. How do I go about setting up to cut?

View 10 Replies View Related

CorelDRAW Graphics Suite X4 :: Registration Marks On All Layers For Vinyl Cutting

Aug 3, 2011

Using CD x4.I cut directly from Corel.  I was trying to do a simple 2 color vinyl job. I put reg marks but they are only on one layer. I tried copying but they weren't in the same place as the other layer.

Is there a way to get the Reg Marks to appear on all layers properly ?

View 5 Replies View Related

CorelDRAW Graphics Suite X5 :: Vinyl Cutter Cannot Close Edges When Cutting

Jun 19, 2012

when i cut vectors letters and numbers, its cuts but at every character it does not seem to completely fill the edges. so i always have to use my small nt cutter to do that.

i read the manuals, changed the offset, reduced the cut speed, increased the pressure and even convert to curves before i cut but the problem does not go away. the company where i bought it from is not very useful.

maybe because the machine is chinese i have a creation pcut ct630 vinyl cutter.also in coreldraw, i always use "harline" when cutitng anything is it correct?

Creation pcut ct 630 vinyl cutter

View 5 Replies View Related

CorelDRAW Graphics Suite X5 :: Export PDF When Graphics Has EPS Files In It?

Jun 9, 2011

Client supplies me with word document, I make a PDF from it and then from Acrobat create an ESP file, this is done as an eps file is much less likely to cause probs then importing a PDF, I then print from the Coreldraw file with the EPS pages no problem. The problem then arises when I have to then create a PDF file from COreldraw for the client - any EPS files in the document do not appear in the PDF  - so there lies the problem.I cannot alway directly import a PDF file (often screws up) even if I save fonts as outlines. Saving as EPS overcomes most/all issues.

View 3 Replies View Related

CorelDRAW Graphics Suite X5 :: Cutting All Components Of Image Using Cutting Master 2 Plugin

Aug 1, 2011

I have downloaded an eps file, which I need to cut. I use a graphtec ce5000-60 cutter, and a plugin called cutting master 2 in order to use coreldraw.

when i select application launcher and choose cut / plot, it opens cutting master. when i do this, it only shows the 2 outer lines of the logo i need to cut. I have attached a screenshot so you can see exactly what I mean. I have tried lots of things to recitfy this, but as a complete beginner with this software, I really dont have a clue. 

View 8 Replies View Related

CorelDRAW Graphics Suite X5 :: Export To PDF - Most Of OLE Files Do Not Print

Feb 23, 2012

I just purchased and installed X5 on my Win 7 Pro system. I work with large files (8-10MB) using multiple OLE linked CDR files and bitmaps. When I export to PDF using the built-in exporter, most of the OLE files do not print and the ones that do are corrupted. I have made a work around using doPDF V7, but believe this should work out of the box.

View 3 Replies View Related

CorelDRAW Graphics Suite X6 :: EPS Export Of Paragraph Text

Apr 15, 2013

why the bounding box is so wrong when exporting paragraph text as EPS and placing it in InDesign or opening in Photoshop? See screenshots below. Text is being convert to curves in the EPS export dialog box.

At one point today, I was exporting an entire 8.5x11 page with a small block of paragraph text in the middle and it came into InDesign at 10x11".

Draw 16.3.0.1114, Ghostscript GPL 8.64

View 6 Replies View Related

CorelDRAW Graphics Suite X6 :: How To Export Very Large Image Files

Jul 20, 2012

Is there any way for CorelDraw X6 to export very large TIFF files? e.g. greater than 30,000 pixels in each dimension? I am currently running X5 on XP 32-bit and it cannot seem to handle it, even though Photo-Paint appears to have the ability.I finally manage to get our IT guys to give me a Win7 64-bit test machine for me to trial X6 64-bit, but seems to only do marginally better than my X5 installation. The test machine already has 7GB RAM installed plus a very, very large drive.I also had to run the same test on Adobe Illustrator and it was able to deal with this very quickly and smoothly, no troubles at all.You may find it hard to believe, but I actually like using CorelDraw :-), which is so far the standard package for our company, but if I cannot get X6 doing what we want, I'm afraid it's the end of the line.

View 14 Replies View Related

CorelDRAW Graphics Suite X3 :: Save Files Incremental When Export?

Jan 23, 2012

I need to save files incremental when export,that is a fragment from my script:

ActiveLayer.Shapes(98).CreateSelection    Set expopt = New StructExportOptions    expopt.UseColorProfile = False    Set expflt = ActiveDocument.ExportEx("F:...�1.plt", cdrHPGL, cdrSelection, expopt)    expflt.Finish

need to change 01.* file  name with a n+1 function, is posible to do that in VB?

View 4 Replies View Related

CorelDRAW Graphics Suite 12 :: Export As New PNG Files - Transparent Backgrounds

Dec 5, 2013

My version is Corel Draw 12.

I started this exercise off using New from the File menu and then Imported a .png photo. I then feathered out the edges of the photo.

Now I have spent many, many attempts to try and Export this photo (in Corel Photo Paint) as a new .png file so that I can then use it later with other packages e.g. with the hopeful intention of it having a completely transparent background for use with say Power Point. I want the ability to take the new image with a transparent background and place it over an existing background in say PP so that the background "bleeds through" the feathered edges. What is happening is, the feathered edges that I created are no longer transparent when the image gets exported out of Corel Photo Paint as a .png file. They show up as a white glow. I was successful if I followed the steps as given by "Hunter" but I had to create the image wholly in Corel Draw using the transparency tool which does not seem to allow for feathering of the edges of an image. The only way I can see to feather the edges is by using Corel Photo Paint but then I don't get them transparent when I export the file. If I was to create an image with say a circular hole in the middle of it with NO FEATHERING ...sharp edges, all would be fine.

Is it possible to do this in Corel Draw 12?

View 6 Replies View Related

CorelDRAW Graphics Suite X6 :: Text Export With Sysfilter / Translate

Oct 23, 2013

Used the program Sysfilter to translate texts in draw. [URL] ....

View 1 Replies View Related

CorelDRAW Graphics Suite X5 :: Can't Export Large Drawing With Raster Graphics

Jul 21, 2013

i´m using CRD since X3 so I think i´m quite experienced with all the crashes and uncompatibilities but now I have a problem which I can´t solve.

 I made a graphic project which is quite large (2,6m x 2,0m @ 300dpi) and including raster grahics. The CDR file itself has about 400MB. When I tried to export this graphic to the png or jpg at the current size Corel X5 always crashes. I tried almost everything on many computers but always the same problem.

It looks like the project is too large for export. At this moment I desperately need to export the file to jpg or png at full resolution.  Maybe X6 is more stable when exports or I have to simplify the project somehow but...

FILE IS UPLOADED here and I need to have it 2,6m x 2,0m: [URL]

View 4 Replies View Related

CorelDRAW Graphics Suite X6 :: Export Multiple Pages To JPEG Files?

Jun 30, 2013

I have a document with multiple pages. I need each page saved as a separate JPEG file.

I can do this by exporting each page individually, but this is painful - I have 29 pages to export.

Is there any way to export all pages in one step? I would like the JPEG files to be created with the page name as the file name.

View 8 Replies View Related

CorelDRAW Graphics Suite X6 :: Export JPG (text File) For Banner That Was 6ft X 18ft?

Apr 18, 2013

(CORELDRAW X6.3) Today I tried to export a .jpg file (text file) for a banner that was 6ft x 18ft.  The export function wouldn't allow the 18ft, but changed it to like 9ft.

Tried in same in X3 and had the same result.

I could export the file as a .pdf and it worked just fine.

The question is, is there a maximum export size?

View 9 Replies View Related

CorelDRAW Graphics Suite X5 :: How To Export Text As Editable To Photoshop Or To Photopaint

Oct 11, 2011

how to export the text as an editable to photoshop or to photopaint as exactly as in the coreldraw ? It should be editable after exporting them 

View 1 Replies View Related

CorelDRAW Graphics Suite X5 :: Top Line Of Curved Text Missing - Export Logo To PNG Or JPG

Nov 1, 2011

I'm having problems exporting a logo to a png or jpg the top line of curved text (MWW) keeps disappearing. It's probably really simple, but damn its annoying. File is on rapid share [URL ...

View 5 Replies View Related

CorelDRAW Graphics Suite X6 :: Error In Cutting Design

Dec 3, 2013

I have a problem with cutting the design, it actually prints it but not cut it. The error displays : Cut Data File Creation Error..

I'm using Corel Draw Graphics Suite X6, Raster Link, to print & cut using Mimaki CJV30-60..

What does the error actually mean & what do I need to do to resolve this?

View 2 Replies View Related

CorelDRAW Graphics Suite X5 :: Cutting Out Center Of Object

Nov 26, 2011

Im trying to cut out the centre of the letter R below. Normally I break curve apart, select the centre, and trim it from the outer. I can then select the centre piece and remove it. As you can see, this has worked with the letters P & O. When I do it with the R it seems to have worked, to the point where I can even select the centre and remove it, but when I put it back over a coloured background, it is still white.

View 8 Replies View Related

CorelDRAW Graphics Suite X4 :: Cutting Design In Half

May 5, 2011

I have a design that I would like to cut in half so that I can cut half of it at at time on my vinyl cutter.  I can't think of way to do it in Corel.

View 5 Replies View Related

CorelDRAW Graphics Suite X4 :: Cutting Lines For JPEG

May 12, 2011

A customer sent me a jpeg of a white dove that they want printed on vinyl and then contour cut to put on their travel trailer.  The picture was a very low dpi and I scanned it and increased the dpi to 150.  I tried to trace it, but it just would not come out right. 

My question is -- Can I put cutting lines around the dove as a bitmap and then be able to print and contour cut it out?

View 1 Replies View Related

CorelDRAW Graphics Suite X4 :: Cutting Master 2 Opens Behind It?

Nov 26, 2011

I just recently purchased a new computer and installed all my software. When I'm in corel draw and click on the icon to send to my plotter/cutter, the cutting Master 2 plug-in opens behind corel draw.  It always opened in front of my corel screen on my older pc.  how to get it to open in front of corel?

View 2 Replies View Related

CorelDRAW Graphics Suite X5 :: Cutting Large Images

Aug 1, 2011

Im new to both coreldraw, and to the graphtec cutter, so my problem may have a very simple answer. Ive been playing around with it, learning how things work. Smaller images are no problem, but Im having trouble cutting larger images.

the plotter can cut up to a width of 610mm, and Im using 610mm vinyl. I need to cut some items that are 600mm wide. First time I tried, it left a gap on the left side of approx 50mm. It also stopped cutting approximately 20mm from the right side. next time, I loaded the vinyl into the machine 45mm further right and tried again. this time the left hand edge was positioned where I expected, but the right side still stopped in the same place as previously, leaving a gap of around 70mm on the right hand side. you would think I was trying to cut something bigger than the capacity of the cutter, but obviously this isnt the case.

if I have missed any necessary information etc, Im very new to all of this.

View 7 Replies View Related

CorelDRAW Graphics Suite 11 :: Double Cutting And Slow Running?

Sep 20, 2011

Have recently upgraded to corel 11, from 9, but at the same time upgraded my computer.

When I try to plot a simple circle shape on my Roland CM24 the image cuts twice and is extremely slow (juddering).

I believe the double cut is caused by the hairline & fill but messing around have only gone from double cutting each shape individually to do double cutting the whole image.

View 2 Replies View Related

CorelDRAW Graphics Suite X3 :: Unable To Recognize Text From Files

Aug 31, 2012

I just installed Corel 13 to my new computer, but it isn't recognizing the text in any of the files from my previous computer. Granted, the files on my previous computer were in an older version of Corel, but that shouldn't be an issue.  I can add text to a new document, but even when importing a pdf, the text in the file disappears.

If you drag to select the area where the text should be, it recognizes that something is there.  However, you can't see anything or do anything with it.  I ran the repair on the installation CD, but I am still having the same problem.

View 3 Replies View Related

CorelDRAW Graphics Suite X5 :: Dropping Lines Of Text Or Parts Of Graphics?

Dec 1, 2010

We are having a big problem with dropping lines of text or parts of graphics.  It is happening on 3 different laser systems and 2 different printers. 

View 14 Replies View Related

CorelDRAW Graphics Suite X4 :: Graphics And Text Disappear After Zoom In Or Out Quickly

Sep 5, 2009

Often whatever I'm working on in X4 disappears off the document page when I zoom in or out. It's still there (I can see it in the print preview)and I can print it, but I can't see it no matter what view (e.g., normal, draft, etc.) I select. If I select the entire page I can see the graphic and text handles, but nothing else. The only way I can see my work again is to save it, close the program, and then re-open the file. My computer is a Dell Precision Work Station T3400 running Vista Ultimate with an Intel Core2 Quad CPU, 4GB RAM, and my graphics card is an NVIDIA Quadro FX 570 256MB. All my software and drivers are up to date. The problem occurs no matter what screen resolution or refresh rate I'm using.

View 6 Replies View Related

CorelDRAW Graphics Suite X3 :: Preparing Images For Plasma Cutting Metal Art?

Dec 2, 2007

Using Corel to prepare images for cutting on a CNC plasma table. any easiest way to prepare images for cutting. With merging images, Lettering and original art work transfer. I need to convert to a DXF format to drop into the machine program (Sheetcam). I have used trace with some success. By this, I mean that the image "looked" good, but I seem to be doing something wrong because the graphic will not run on the machine.

View 3 Replies View Related

CorelDRAW Graphics Suite X4 :: How To Get Crop Marks For Cutting Multi Items

Jul 15, 2010

When I step & repeat the crop marks are not there. How I get the crop marks for cutting multi up items.

View 5 Replies View Related

CorelDRAW Graphics Suite 12 :: Creating Outline Color For Contour Cutting?

Jul 2, 2011

Is there a way to change the outline color around a large group of images all at once?

I am trying to create an outline color for contour cutting and I have the outline color in my spot colors but now I was wondering if I could apply these change to all the images at once instead of changing each one.

View 2 Replies View Related

CorelDRAW Graphics Suite X5 :: Missing Text Or Graphics When Printing?

May 9, 2011

X5 Recently have begun missing parts of print out. Tried to duplicate but appears completely random.

Output to both Full colour laser and Wide Format printers will miss either text or part of objects. Today printed the text but not the text effects.   Initially closed and reopened, rebooted, However this has become a now daily feature so regardless tried reprint from the same screen so next print has everything included.

Very costly and time consuming - print preview shows all correct but output is not the same.

Running Win 7 64bit  8GB Ram

View 14 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved