I just purchased and installed X5 on my Win 7 Pro system. I work with large files (8-10MB) using multiple OLE linked CDR files and bitmaps. When I export to PDF using the built-in exporter, most of the OLE files do not print and the ones that do are corrupted. I have made a work around using doPDF V7, but believe this should work out of the box.
View 3 RepliesI have SP3 installed along with the hotfix. I have less than 500 fonts installed as well as ran a repair and F8 my desktop. I still get random closes when I save, print, or export a pdf. Are there any specific fixes out there?
View 10 Replies View Relatedwhy (sometimes) when I export text or graphics as .eps files to my cutter it cuts the same outline up to four to five times and ends up cutting right through the backing paper. I have been using postcut with various corel editions since 1997 with no problems until recently. It also cuts random lines through lines of text which is such an expensive pain in the ass.
I started to use the production manager in flexi sign to cut my designs and same thing happens, except for the random lines but it will make up to five cuts on some objects. All text and graphics are exported the same. Has something in corel newer versions changed in relation to this?
Client supplies me with word document, I make a PDF from it and then from Acrobat create an ESP file, this is done as an eps file is much less likely to cause probs then importing a PDF, I then print from the Coreldraw file with the EPS pages no problem. The problem then arises when I have to then create a PDF file from COreldraw for the client - any EPS files in the document do not appear in the PDF - so there lies the problem.I cannot alway directly import a PDF file (often screws up) even if I save fonts as outlines. Saving as EPS overcomes most/all issues.
View 3 Replies View RelatedAfter successfully using Corel Draw for some years, I am suddenly unable to print files. Instead of the file, my printers just print a black page. I have tried re-installing but it has not worked.
View 1 Replies View RelatedIs there any way for CorelDraw X6 to export very large TIFF files? e.g. greater than 30,000 pixels in each dimension? I am currently running X5 on XP 32-bit and it cannot seem to handle it, even though Photo-Paint appears to have the ability.I finally manage to get our IT guys to give me a Win7 64-bit test machine for me to trial X6 64-bit, but seems to only do marginally better than my X5 installation. The test machine already has 7GB RAM installed plus a very, very large drive.I also had to run the same test on Adobe Illustrator and it was able to deal with this very quickly and smoothly, no troubles at all.You may find it hard to believe, but I actually like using CorelDraw :-), which is so far the standard package for our company, but if I cannot get X6 doing what we want, I'm afraid it's the end of the line.
View 14 Replies View RelatedI need to save files incremental when export,that is a fragment from my script:
ActiveLayer.Shapes(98).CreateSelection Set expopt = New StructExportOptions expopt.UseColorProfile = False Set expflt = ActiveDocument.ExportEx("F:...�1.plt", cdrHPGL, cdrSelection, expopt) expflt.Finish
need to change 01.* file name with a n+1 function, is posible to do that in VB?
My version is Corel Draw 12.
I started this exercise off using New from the File menu and then Imported a .png photo. I then feathered out the edges of the photo.
Now I have spent many, many attempts to try and Export this photo (in Corel Photo Paint) as a new .png file so that I can then use it later with other packages e.g. with the hopeful intention of it having a completely transparent background for use with say Power Point. I want the ability to take the new image with a transparent background and place it over an existing background in say PP so that the background "bleeds through" the feathered edges. What is happening is, the feathered edges that I created are no longer transparent when the image gets exported out of Corel Photo Paint as a .png file. They show up as a white glow. I was successful if I followed the steps as given by "Hunter" but I had to create the image wholly in Corel Draw using the transparency tool which does not seem to allow for feathering of the edges of an image. The only way I can see to feather the edges is by using Corel Photo Paint but then I don't get them transparent when I export the file. If I was to create an image with say a circular hole in the middle of it with NO FEATHERING ...sharp edges, all would be fine.
Is it possible to do this in Corel Draw 12?
I have a document with multiple pages. I need each page saved as a separate JPEG file.
I can do this by exporting each page individually, but this is painful - I have 29 pages to export.
Is there any way to export all pages in one step? I would like the JPEG files to be created with the page name as the file name.
Just a guess but with 64 bit Coreldraw maybe we would be able to Print Merge large files without crashing or having to break it into digestible bits.
Do vector conversion of complex images.Use Coreldraw like a publishing program, - kick Indesign
Computer memory is no longer the issue - 32 bit computer programs are.Until then I will stay with X4. run in Windows 7, 64 bit with 12 Gigs RAM.
Will Corel6 (or later) ever be able to export to a web page directly since the HTLM export doesn't work (drops links). The Corel Web program, or what ever its name is, was a joke. Its amazing that Corel work puts its name on a program that you could not open a CorelDraw file.
My current work around is to export to a JPG and then import that into dreamweaver and add the links there, then post. A pain but it works.
i´m using CRD since X3 so I think i´m quite experienced with all the crashes and uncompatibilities but now I have a problem which I can´t solve.
I made a graphic project which is quite large (2,6m x 2,0m @ 300dpi) and including raster grahics. The CDR file itself has about 400MB. When I tried to export this graphic to the png or jpg at the current size Corel X5 always crashes. I tried almost everything on many computers but always the same problem.
It looks like the project is too large for export. At this moment I desperately need to export the file to jpg or png at full resolution. Maybe X6 is more stable when exports or I have to simplify the project somehow but...
FILE IS UPLOADED here and I need to have it 2,6m x 2,0m: [URL]
I have a client that I laser engrave parts with a variety of graphics, about 35 different designs that fit on 10 different parts and all the designs are different sizes on the parts. I use a fixture that holds 40 parts, two rows of 20, for each type of part. I have a master file for each part that contains a page with each graphic laid out as in the fixture so that I can simply go to the page and select the graphic in the right position for the fixture and paste it into a "lasering" file. The lasering file is just as many pages as I need to run the order and is much smaller than the master file.
That works fine now and is actually pretty quick and easy to setup, but I just found out that they will be adding about 35-40 designs a month. That will make the master file huge and very cumbersome to manage, not to mention the order sheet (spreadsheet) will get huge in no time at all. I can envision it becoming a nightmare to manage and mistakes will be frequent due to the sheer size of the files.
What I would like to do is have a spreadsheet with the graphic and a quantity and merge that into the lasering file instead of doing it manually. I am very familiar with merging data but I don't know if it's possible to merge a graphic from a database or somehow import the graphic into corel.
how to export png from corel?
View 3 Replies View RelatedI made a vectorial shape with CorelDraw x3, and exported it as EPS. I can import it again with no problems, but when I try IMPORT using other software, the EPS file is readed truncated.. is a kind of shifted image.
Do you have any clue about that?
After upgrade from X4 to X6.4 noticed that AI export filter in version 7 is not present. It is very important - only ver 7 is readable for my software for laser machine and I really need this funkction. Maybe detail, but without this small point big X6.4 is like garbage
View 2 Replies View RelatedWhy am I having trouble printing out an 8.5 X 11 full coverage page when my setting says there are no issues?
Also, why does it want to print inside the dotted border if I have it set to print full page?
I am unable to print over 6' in length even if the file size is small. I am using a Roland SP-300.
View 5 Replies View RelatedI'm trying to print a flier on A6 paper on an HP CP1515n. I set the paper size in Corel 12 to A6, then set the paper size on the printer to A6. The paper feeds through very nicely - with nothing on it.
It works fine printing from MS Word so I am placing the paper correctly.
Using XP Home Edition SP 3.
I am currently printing on A4, then cutting into 4. I have found a cheap source of A6 paper but can't get my fliers to print.
I want to start a project on Corel which will be initially printed. So I will start with the basic Cmyk template given from the window that pops up and make sure that the Color Managements is set correctly for printing settings.
My question now lies: What should I do if the same project has to be uploaded on the web too? What I would do is:
1. Create a new project selecting the RBG template given from the window that pops up.
2. Paste the project
3. Convert the colors to RGB
4. Set the Color management to RGB settings.
5. Export.
I have to make print merge firelds in CDX6.
The problem is that I have not Excel on my PC. Only Open office. I create a csv file but Open Office asks me every time what the Field and Text delimiter have to be - for the Field "," ";" ":" "tab" or "space" and for the Text " or '. After that it asks me to check or not few check boxes. See the picture below.
I tryed few combinations but the same result - Failed to save print merge data!
I dont know what to chek but the biggest problem is that I tryed to save a txt tab delimited on other computer with excel and when I try to print merge after loading the txt file Corel says Failed to save print merge data.
I saw that we can Print merge directly from xls files but I cant find that option in ODCB Data Source. Weird! because I have to do 1100 badjes with different merge fields like country, name, code etc... and if I start to make them by hand it will be forever!
I would like to export a page I am creating as a jpg. Right now, I have one object on the page, and its a .jpg object. When I export from the File menu, only the jpg is exported. How can I export the entire page? If I add text to the object (which will be a banner). it only exports the jpg, and and the exact space required by the text, not the entire page. I have been unable to find setting for exporting selected objects or entire page. I have another less powerful drawing program that gives options to export object, selection, or page.
If I create a box, and place it on the document, the whole thing will export, but if the pox is larger than the page, then entire box is still exported, where I only want the page dimensions exported so I can eventually arrange objects ont he box that will overlap the page dimesnsions, but only the page area should be exported as a jpg.
Should I be doing this as a powerclip? I haven't used that feature yet in CD. Then export the powerclip object?
I would like to export my Corel Draw X6 file to a .pdf., but is there an option that will make it non-vectored? I'm a sign designer and often need to create multi-paged .pdf's to submit to architects and customers. But in giving the customer the .pdf I've now basically given away all of my vectored art. Anyone with Corel Draw or Adobe Illustrator can simply import the .pdf and now they have all of my artwork in vectored form. Obviously I can export single pages as .jpg to solve this issue, but for multiple pages, and for contractual reasons I'm required to submit .pdf's to the architect or customer.
Is there a way/setting to export to .pdf, and have it be a simple, rastor-like image, that contains no vectored information?
I've seen PDF files with layers (the same as it comes in Corel Draw - you can hide or show something etc.). Probably they were created with AutoCAD.
Is it possible to export/save CorelDraw file to such PDF with layers? For example, if I got 3 layers in my CDR then I'd like to have them in my PDF.
I tried option PUBLISH TO PDF but I didn't find (or I wasn't careful enough) any option to do this.
we use CorelDraw for all our design and day-to-day artwork requirements, and for preparing artwork for our laser engraving machinery. We have recently upgraded to X6 and have found problems exporting to .plt.
First we noticed that a page border surrounding artwork, where we use the page border for positioning, and the art to engrave, the page border would export, but anything inside it would not. So we tried all the obvious workarounds - grouping etc, but found that the only way to get it all across was to combine the artwork.
Now we are noting that anywhere there is artwork surrounded by a closed curve - eg a rectangular block with a phone number reversed out - the art that is surrounded (eg the phone number) will not export if un-grouped or grouped, it has to be combined into one object.
I tried almost all the options to export a color coreldraw to a grayscale image, in EPS.
With the X4 I have, I did not succed, the eps image is never grayscale, but stays colored.
How to export png or jpg 32 bits?
I only see 24.
CorelDraw X5 v. 15.2.0.686 Hot Fix 4 - Windows 7-64
I have just upgraded to X6 from X5.
When I export a PDF the dialog window no longer opens and offers me the choices for crop marks, bleeds and so on!
This all use to work fine in X5.
How can I get this to start working properly again.
For some strange reason I no longer have the option to export to ai. I am not running 6.4 (latest update) and was hoping that when this update was installed that it would have fixed the issue, but it did not.
View 6 Replies View RelatedIs it possible to export each layer to a different .png?
CorelDraw X5 v. 15.2.0.686 Hot Fix 4 - Windows 7-64
I have no JPG preview in connect or windows explorer it shows only an icon, This is only files exported from CD or PP. All other JPG exports from PS or other programs are OK
If I hover over the JPG icon in connect I get a large thumbnail preview that is OK
I have F8 and repaired CD from disc and remove and Installed CD with no fix
Win 7 64bit 8 Core 12Gig Ram all up dates are installed
Win 7, Intel Core i7, 3.2mhz, 12Gig Ram. AMD 5870 Corel X6, Photoshop CS3, Lightroom 5, Flexi 10.5, Versaworks, Galaxy Tab 2
[URL]