After successfully using Corel Draw for some years, I am suddenly unable to print files. Instead of the file, my printers just print a black page. I have tried re-installing but it has not worked.
View 1 RepliesWhen I am printing my design, the black is not printing. Have tried on two printers, neither are faulty. Wondered if I accidentally have it on a setting that doesn't allow it to print black.
View 3 Replies View RelatedI have a problem with printing in X5. All the documents I've worked in X4when I print the X5 have a problem with the colors, they are not the same with X4.
Printing with: HP inkjet 110 A0Riso RZ370, RZ590 A3Epson inkjet 1400 A3Canon laser LBP5200 A4HP laser 1010 A4
While using print merge option Corel Draw X5 give me an error when I try to import an existing csv or txt file on the print merge dialog box. It says "Impossible to open the file or not correct file format". The files are made with open office or microsoft works, and in the past I've already used and worked good. Now I find this error...
View 4 Replies View RelatedI have a file set up that has a white box with a 65% transparency lens. When I go to print, the white box and what's under it disappear and do not print. If I close the document and reopen it, the transparent box and what under it are back.
What do I need to do so this doesn't happen?
I just purchased and installed X5 on my Win 7 Pro system. I work with large files (8-10MB) using multiple OLE linked CDR files and bitmaps. When I export to PDF using the built-in exporter, most of the OLE files do not print and the ones that do are corrupted. I have made a work around using doPDF V7, but believe this should work out of the box.
View 3 Replies View RelatedI am trying to import a pdf file ford connect van template into CorelDraw x5 but am having no joy.
View 2 Replies View RelatedHaving trouble opening an svg file in X6. Crashes both X5 and X6.
File available here : [URL] ....
I'm unable to open/import .ai files into corel x4. Getting "corrupted file" error.
View 5 Replies View RelatedI just installed Corel 13 to my new computer, but it isn't recognizing the text in any of the files from my previous computer. Granted, the files on my previous computer were in an older version of Corel, but that shouldn't be an issue. I can add text to a new document, but even when importing a pdf, the text in the file disappears.
If you drag to select the area where the text should be, it recognizes that something is there. However, you can't see anything or do anything with it. I ran the repair on the installation CD, but I am still having the same problem.
When I try to open about 90% of my files, I can't. I get an error with a yellow caution triangle with an exclamation point. it says "Error Reading C:UsersSignsPlusDesktop.......
So I end up dragging everything to a new page. That works fine but it's a pain ending up with multiples of everything.
Just a guess but with 64 bit Coreldraw maybe we would be able to Print Merge large files without crashing or having to break it into digestible bits.
Do vector conversion of complex images.Use Coreldraw like a publishing program, - kick Indesign
Computer memory is no longer the issue - 32 bit computer programs are.Until then I will stay with X4. run in Windows 7, 64 bit with 12 Gigs RAM.
I have a client that I laser engrave parts with a variety of graphics, about 35 different designs that fit on 10 different parts and all the designs are different sizes on the parts. I use a fixture that holds 40 parts, two rows of 20, for each type of part. I have a master file for each part that contains a page with each graphic laid out as in the fixture so that I can simply go to the page and select the graphic in the right position for the fixture and paste it into a "lasering" file. The lasering file is just as many pages as I need to run the order and is much smaller than the master file.
That works fine now and is actually pretty quick and easy to setup, but I just found out that they will be adding about 35-40 designs a month. That will make the master file huge and very cumbersome to manage, not to mention the order sheet (spreadsheet) will get huge in no time at all. I can envision it becoming a nightmare to manage and mistakes will be frequent due to the sheer size of the files.
What I would like to do is have a spreadsheet with the graphic and a quantity and merge that into the lasering file instead of doing it manually. I am very familiar with merging data but I don't know if it's possible to merge a graphic from a database or somehow import the graphic into corel.
When I checked my computer for any any unused programs I got see this coreldraw (r) graphics suite x5 installed. When I got to uninstall it showed and error message that some sort of setup.xml is missing. When I checked this programs folder I got to see that there are two corel folders [Corel and Corel (2) ] in my C: drive. After checking all the file locations of different corel applications I deleted the Corel (2) foder. After that also corel was not being uninstalled. I don't want to re-format my computer only for this
View 1 Replies View RelatedI'm unable to print halftone on postscript printer.
View 1 Replies View RelatedWhy am I having trouble printing out an 8.5 X 11 full coverage page when my setting says there are no issues?
Also, why does it want to print inside the dotted border if I have it set to print full page?
I am unable to print over 6' in length even if the file size is small. I am using a Roland SP-300.
View 5 Replies View RelatedI'm trying to print a flier on A6 paper on an HP CP1515n. I set the paper size in Corel 12 to A6, then set the paper size on the printer to A6. The paper feeds through very nicely - with nothing on it.
It works fine printing from MS Word so I am placing the paper correctly.
Using XP Home Edition SP 3.
I am currently printing on A4, then cutting into 4. I have found a cheap source of A6 paper but can't get my fliers to print.
I want to start a project on Corel which will be initially printed. So I will start with the basic Cmyk template given from the window that pops up and make sure that the Color Managements is set correctly for printing settings.
My question now lies: What should I do if the same project has to be uploaded on the web too? What I would do is:
1. Create a new project selecting the RBG template given from the window that pops up.
2. Paste the project
3. Convert the colors to RGB
4. Set the Color management to RGB settings.
5. Export.
I have to make print merge firelds in CDX6.
The problem is that I have not Excel on my PC. Only Open office. I create a csv file but Open Office asks me every time what the Field and Text delimiter have to be - for the Field "," ";" ":" "tab" or "space" and for the Text " or '. After that it asks me to check or not few check boxes. See the picture below.
I tryed few combinations but the same result - Failed to save print merge data!
I dont know what to chek but the biggest problem is that I tryed to save a txt tab delimited on other computer with excel and when I try to print merge after loading the txt file Corel says Failed to save print merge data.
I saw that we can Print merge directly from xls files but I cant find that option in ODCB Data Source. Weird! because I have to do 1100 badjes with different merge fields like country, name, code etc... and if I start to make them by hand it will be forever!
I have followed the instructions carefully and am unable to fill anything.
I make a rectangle. Choose the colour from the palette, drag the little coloured box over to the rectangle and release. Nothing. Many years ago I used my brothers Corel draw, so I know ( or knew then ) how to colour a rectangle.
I'm not able to assign a Hotkey to enable me to use Corel Capture. No matter what I use, it tells me that the Hotkey is already being used by this system. I have deleted Hotkeys and then then tried to reassign them to no avail.
View 14 Replies View RelatedWhen I export from Corel Draw as a jpg, then put the image online, on IE it shows as a red x.
View 5 Replies View RelatedNo matter what size doc I create when I go to print it only shows letter size. Tried re-saving, changed page layout, etc. with no luck. If I press print I get a page size missmatch error.
View 7 Replies View RelatedWe are having issues with Corel X6: when we try print preview, the print preview window opens, but after we click print, it just crashes and that's it.
Both corel and Windows are updated, and the machine is clean.
I'm currently working on an XP 32 bit system with AMD Athlon 64 3200+
CorelDraw is displaying a print preview but is otherwise completely idle. It has finished displaying the preview, so it is just waiting for user action but has nothing else to do.
Photopaint in another window was running extruciatingly slow so I checked task manager. CorelDraw.exe was showing to be using 98% of the CPU.
On further investigation, this happens only when the print preview is on the screen. I close the print preview, return to CorelDraw design screen and CPU is 0% when idle. I do another print preview -- 98% CPU again.
I'll try it later on a quad core system, but it seems that print preview should not be hogging the CPU when idle waiting for operator action.
I have a rather large job, a book with 370 pages. when we want to reprint w/o any changes i would like to turn off the print preview to eliminate the delay.
How to bypass the print preview?
I have problem with printing shadows. I have dark gray background and I made box to which I created shadow. No problem there. But when I print the document, the box surrounding shadow (the one I can use to change dimension or rotate, which isnt visible) changes my dark gray background.
View 2 Replies View RelatedPreviously I could choose a large paper size on my printer select fit to page and the document would scale up to printer out on paper large than than the design page. When I try this with X6 the image disappears. Is this a known bug?
View 4 Replies View RelatedI created a list if voucher numbering from 1001 to 1200, but when I perform the Print Merge, the list shown are with one decimal point i.e. 1001.0, 1002.0, etc....
What is the reason for this?
I need to replace all colors of document (except black) with one pantone. Is it possible?I've imported pdf file with vector and bitmap graphics, but it has few colors. I need to use just 2 colors in print. Is it possible to replace CMY with one pantone in print? How can I do it?Something like that:
View 4 Replies View Related