I created a list if voucher numbering from 1001 to 1200, but when I perform the Print Merge, the list shown are with one decimal point i.e. 1001.0, 1002.0, etc....
What is the reason for this?
I have to make print merge firelds in CDX6.
The problem is that I have not Excel on my PC. Only Open office. I create a csv file but Open Office asks me every time what the Field and Text delimiter have to be - for the Field "," ";" ":" "tab" or "space" and for the Text " or '. After that it asks me to check or not few check boxes. See the picture below.
I tryed few combinations but the same result - Failed to save print merge data!
I dont know what to chek but the biggest problem is that I tryed to save a txt tab delimited on other computer with excel and when I try to print merge after loading the txt file Corel says Failed to save print merge data.
I saw that we can Print merge directly from xls files but I cant find that option in ODCB Data Source. Weird! because I have to do 1100 badjes with different merge fields like country, name, code etc... and if I start to make them by hand it will be forever!
I have just ugraded 4 computers to X5 (one w7, 3 with XP) and are having a lot of problems with the application crashing or hanging. Applies to all computers. We do a lot of print merges, more than 100 a day. Happens randomly, but mainly after several jobs have been printed (jobs, 5-10, still open in X5 in case som modifications are needed).
View 3 Replies View Relatedview.jpg
since i upgraded to X6 i cannot do imposition anymore, using print merge.
Before i set a page with lets say A5 with the layout, and then in the print merge, i would put 4up (four A5), and it went well, using (collate and cut as well).
Now look at my attached file, the first page stays different size.
I just installed X6 64bits on my new Windows 7 64 bits machine, so far so good.
But when I try to use the Print Merge wizard, I get this error at the stage where I want to import the lost from an Excel sheet:
I need to prepare the artwork for 1000 member cards with the membership number present as a barcode. How can I generate the barcode for each individual card without doing it one by one?
View 14 Replies View RelatedWhile using print merge option Corel Draw X5 give me an error when I try to import an existing csv or txt file on the print merge dialog box. It says "Impossible to open the file or not correct file format". The files are made with open office or microsoft works, and in the past I've already used and worked good. Now I find this error...
View 4 Replies View RelatedI am using CorelDraw to create price labels for my store. When I merge in the price field for an item I want it to show on the label with the cents in superscript as opposed to using a decimal and full sized cents text. Is this possible in any version of CorelDraw using the print merge feature?
Keep in mind that I also have the price field in an envelope so that the price takes up the full size allotted on the label whether the price is $1.99 or $999.99.
I have a document, where I need to have 4 different print merge fields from 4 different data sources (.txt).I can only make it work with 1 print merge field.
View 5 Replies View RelatedWhenever I perform a PrintMerge the print dialog and its options are reset everytime I leave the print dialog.
Usually you hit print set parameters and hit apply, you now can cancel the dialog and hit print again, your previous settings should still be there. Same goes if you actually print and want to repeat the print process, as long as you dont close the document. This works for normal printing but fails with print merge.
Every time I close the dialog (not the document) all the settings are back to default. This did not happen in X5 and is very annoying since it resets to default even if you actually hit print, forcing you to set the parameters every time.
I am having an issue with X6's print merge not recognizing a properly formatted numeric filed from my Excel spreadsheet. My first issue was that Corel was adding a decimal point after my numbers. This was when they were still formatted as text fields. (which i still don't understand why, since they were just TEXT fileds)
I know that the fields need to be "numeric" fields.
FYI i have ALREADY COMPLETED MY TASK by using an "added" numeric filed that i added IN CorelDraw and then used the "Numeric Field Options" at the bottom of the page to get my number sequence.
However, that is not my question.... my question is: How do i get corel to RECOGNIZE a numeric field AS a numeric field in the first place.
Just a guess but with 64 bit Coreldraw maybe we would be able to Print Merge large files without crashing or having to break it into digestible bits.
Do vector conversion of complex images.Use Coreldraw like a publishing program, - kick Indesign
Computer memory is no longer the issue - 32 bit computer programs are.Until then I will stay with X4. run in Windows 7, 64 bit with 12 Gigs RAM.
Use merge for standard things like labels.Have a large ongoing project which requires
Lots of Excel data - eg: 6685.excel example.tifcolumns x AZrows x 300 upwards
All rows required to create a book of running information.
If I use a label type approach some rows have less data making the layout uneven (unsuitable for the project)
Is there a way to merge with a fluid result ?
Ie row one takes up 2 lines Row 2 takes up 5 lines Row 3 takes up 1 line etc
0728.excel example.tif
I work with CorelDraw X5 and I wonder if there is a way to insert an application of page numbering that is automatic, which automatically update the page when I add or remove a page, as in the word.I got a number through the macros but the problem is the numbers are fixed and not change. And numeracy not appear on new pages.
View 4 Replies View RelatedHow do I renumber a page, starting at any number, eg 120.Reason: I have a catalog, divided into 4 files, gives the first page 1 to page 50, the second page gives the 51 to 100 and so on .. are 214 pages .. how do I get in this second part, put the number of pages, starting with page 51?
View 1 Replies View RelatedI was trying to make a 60x100mm voucher with numbering.
The artwork has a bitmap background.The file before I do a print merge is 2MB.
I need a running number from 1001-1200, so after I apply the print merge, it creates 200pgs of the voucher.When I try to save this file, it takes almost half an hour to do so.I think this is due to the heavy file size?In addition, the local print shop knows nothing about print merge and imposition, so I have to prepare the artwork readily in A3 size to print.The imposition creates a 10pgs files.I wanted to save this as PDF to preserve the color, but it turned out to be a nightmare (in daytime) for me that it takes more than2 hours to generate the 10pgs PDF.
I need to be able to automatically number pages with a preset. Coreldraw can already do what I need using the PageNumbering macro but I have to enter the individual settings for each template every time. I simply want the included PageNumbering macro but with the option to save 5 presets. If possible I would like the option of saving the presets to a file that can be shared with other workstations so I don't have to manually recreate.
View 5 Replies View Relatedsimple programme for consecutive numbering of forms while digitally printing? e.g. adding consecutive numbers to a batch of pre-printed invoice sets. One original, but numbers on it increasing or decreasing as they are printed.
View 6 Replies View RelatedI have the page numbering macro. It works on new files; however, it doesn't work on specific saved files. What could be wrong with those files? Is there any way to enable the page numbering macro in those files?
I use Corel Draw X3, by the way.
I need to merge several Corel Draw files into one Corel file but have no clue how to do this.
View 1 Replies View Relatedso, for some reason when i choose the body of this cow i drew to fill, it fills its hind leg, and stubbornly refuses to fill the body at all. i have tried all the fill tools to get this too work. i figure if i flatten the image the fill tool will work a bit better.
there is no such thing as flattening the image or merging layers in the help section and the info online hasn't been so great. How do you merge layers?
Using x4. I am looking to merge a list of names into a matrix and maintain text constraints. I want all the names to fit into a certain space (ex. 1.5" long) and to maintain a certain character height (ex. .25" high). So my output should be no longer than 1.5" and all should have .25" high characters on a single line. I am able to setup the template and lock the fields, but during the merge everything gets messed up. All x, y positions, text length and text height have to be manually reentered for each name.
View 1 Replies View RelatedI need to make a bunch of barcode tags for a client. I know CorelDraw isn't the best tool for this, but it's what I have and this is a one-time job.
To partially automate the process, I'm trying to use print merge to make the parts of the tags that aren't barcode, but I include the text that belongs in the barcode on the page. The print merge works correctly, I get what I expect. The next step would be to cut the barcode text, choose Insert Barcode, and then paste the barcode text into the barcode dialog.
Except, when trying to paste the text intended for the barcode I discovered that I was actually copying the <var1> field--not the text. I verified this by copying the "text" from the print merge document and then pasting back into the same document--what I got from the paste was not the expected text, but <var1>.
Since the barcode type I was using does not support the "<" character, it gave me an "invalid character" error.
My attempted solution was to publish to a PDF file and then import into a new document. This worked except for some reason CorelDraw makes a new layer named, inexplicably, "Layer 1" (there's a "Layer 1" by default, why make a second layer with the same name?) BUT when the import is done the new layer is NOT chosen in Object Manager, the original "Layer 1" is. Which means, when I go to copy the text and insert the barcode it ends up UNDER the other parts of the barcode tag which are on the NEW "Layer 1".
When I create my merge document, regardless of how many pages, I will need to make edits to some of the text. Corel will randomly crash when I try to edit the text. Every time. I have lots of work to do and have not the time to deal with this.
Using Corel Draw X4 v14.0.0.701
I was trying this Printing Merge many times. I noted that I could run the Printing Merge only with English Words because when I tried other languages such as Chinese and Khmer. Most of my words became error, so I really couldn't use it as needed. Is the Printing Merge used only with English?
On the contrary, I used to use the Printing Merge in MS Word. It works with all languages. I want to use the Printing Merge in Coreldraw 12 beside English.
I am attempting to create a tag system that will have a 5 digit number but must be printed as shown below
1
2
3
4
5
We have to create a file to be engraved that has 2000 consecutive numbers and we cannot figure out how to make them appear stacked using the merge feature.
I have a client that I laser engrave parts with a variety of graphics, about 35 different designs that fit on 10 different parts and all the designs are different sizes on the parts. I use a fixture that holds 40 parts, two rows of 20, for each type of part. I have a master file for each part that contains a page with each graphic laid out as in the fixture so that I can simply go to the page and select the graphic in the right position for the fixture and paste it into a "lasering" file. The lasering file is just as many pages as I need to run the order and is much smaller than the master file.
That works fine now and is actually pretty quick and easy to setup, but I just found out that they will be adding about 35-40 designs a month. That will make the master file huge and very cumbersome to manage, not to mention the order sheet (spreadsheet) will get huge in no time at all. I can envision it becoming a nightmare to manage and mistakes will be frequent due to the sheer size of the files.
What I would like to do is have a spreadsheet with the graphic and a quantity and merge that into the lasering file instead of doing it manually. I am very familiar with merging data but I don't know if it's possible to merge a graphic from a database or somehow import the graphic into corel.
Why cant I save a cdr job with all the merge fields setup so that next time I open the file I can go straight to 'merge to new document'.
So Ive set up a 10 to view raffle tickets job. Inserted 20 numerical merge fields, positioned, resized, applied font size color alignment etc etc etc.. Takes ages..... So then merge to a new document, works nice and I can save it fine.
There are a hundred reasons why i may have to close the 'master' merge file before the job has been successfully printed. It may be a repeat print job.
Any which way I really dont get why the live merge data fields are lost on closing the file.
Why am I having trouble printing out an 8.5 X 11 full coverage page when my setting says there are no issues?
Also, why does it want to print inside the dotted border if I have it set to print full page?
I am unable to print over 6' in length even if the file size is small. I am using a Roland SP-300.
View 5 Replies View RelatedI'm trying to print a flier on A6 paper on an HP CP1515n. I set the paper size in Corel 12 to A6, then set the paper size on the printer to A6. The paper feeds through very nicely - with nothing on it.
It works fine printing from MS Word so I am placing the paper correctly.
Using XP Home Edition SP 3.
I am currently printing on A4, then cutting into 4. I have found a cheap source of A6 paper but can't get my fliers to print.
