so, for some reason when i choose the body of this cow i drew to fill, it fills its hind leg, and stubbornly refuses to fill the body at all. i have tried all the fill tools to get this too work. i figure if i flatten the image the fill tool will work a bit better.
there is no such thing as flattening the image or merging layers in the help section and the info online hasn't been so great. How do you merge layers?
I need to merge several Corel Draw files into one Corel file but have no clue how to do this.
View 1 Replies View RelatedI have to make print merge firelds in CDX6.
The problem is that I have not Excel on my PC. Only Open office. I create a csv file but Open Office asks me every time what the Field and Text delimiter have to be - for the Field "," ";" ":" "tab" or "space" and for the Text " or '. After that it asks me to check or not few check boxes. See the picture below.
I tryed few combinations but the same result - Failed to save print merge data!
I dont know what to chek but the biggest problem is that I tryed to save a txt tab delimited on other computer with excel and when I try to print merge after loading the txt file Corel says Failed to save print merge data.
I saw that we can Print merge directly from xls files but I cant find that option in ODCB Data Source. Weird! because I have to do 1100 badjes with different merge fields like country, name, code etc... and if I start to make them by hand it will be forever!
Using x4. I am looking to merge a list of names into a matrix and maintain text constraints. I want all the names to fit into a certain space (ex. 1.5" long) and to maintain a certain character height (ex. .25" high). So my output should be no longer than 1.5" and all should have .25" high characters on a single line. I am able to setup the template and lock the fields, but during the merge everything gets messed up. All x, y positions, text length and text height have to be manually reentered for each name.
View 1 Replies View RelatedI created a list if voucher numbering from 1001 to 1200, but when I perform the Print Merge, the list shown are with one decimal point i.e. 1001.0, 1002.0, etc....
What is the reason for this?
I have just ugraded 4 computers to X5 (one w7, 3 with XP) and are having a lot of problems with the application crashing or hanging. Applies to all computers. We do a lot of print merges, more than 100 a day. Happens randomly, but mainly after several jobs have been printed (jobs, 5-10, still open in X5 in case som modifications are needed).
View 3 Replies View Relatedview.jpg
since i upgraded to X6 i cannot do imposition anymore, using print merge.
Before i set a page with lets say A5 with the layout, and then in the print merge, i would put 4up (four A5), and it went well, using (collate and cut as well).
Now look at my attached file, the first page stays different size.
I just installed X6 64bits on my new Windows 7 64 bits machine, so far so good.
But when I try to use the Print Merge wizard, I get this error at the stage where I want to import the lost from an Excel sheet:
I need to prepare the artwork for 1000 member cards with the membership number present as a barcode. How can I generate the barcode for each individual card without doing it one by one?
View 14 Replies View RelatedWhile using print merge option Corel Draw X5 give me an error when I try to import an existing csv or txt file on the print merge dialog box. It says "Impossible to open the file or not correct file format". The files are made with open office or microsoft works, and in the past I've already used and worked good. Now I find this error...
View 4 Replies View RelatedI need to make a bunch of barcode tags for a client. I know CorelDraw isn't the best tool for this, but it's what I have and this is a one-time job.
To partially automate the process, I'm trying to use print merge to make the parts of the tags that aren't barcode, but I include the text that belongs in the barcode on the page. The print merge works correctly, I get what I expect. The next step would be to cut the barcode text, choose Insert Barcode, and then paste the barcode text into the barcode dialog.
Except, when trying to paste the text intended for the barcode I discovered that I was actually copying the <var1> field--not the text. I verified this by copying the "text" from the print merge document and then pasting back into the same document--what I got from the paste was not the expected text, but <var1>.
Since the barcode type I was using does not support the "<" character, it gave me an "invalid character" error.
My attempted solution was to publish to a PDF file and then import into a new document. This worked except for some reason CorelDraw makes a new layer named, inexplicably, "Layer 1" (there's a "Layer 1" by default, why make a second layer with the same name?) BUT when the import is done the new layer is NOT chosen in Object Manager, the original "Layer 1" is. Which means, when I go to copy the text and insert the barcode it ends up UNDER the other parts of the barcode tag which are on the NEW "Layer 1".
I am using CorelDraw to create price labels for my store. When I merge in the price field for an item I want it to show on the label with the cents in superscript as opposed to using a decimal and full sized cents text. Is this possible in any version of CorelDraw using the print merge feature?
Keep in mind that I also have the price field in an envelope so that the price takes up the full size allotted on the label whether the price is $1.99 or $999.99.
When I create my merge document, regardless of how many pages, I will need to make edits to some of the text. Corel will randomly crash when I try to edit the text. Every time. I have lots of work to do and have not the time to deal with this.
Using Corel Draw X4 v14.0.0.701
I have a document, where I need to have 4 different print merge fields from 4 different data sources (.txt).I can only make it work with 1 print merge field.
View 5 Replies View Related I was trying this Printing Merge many times. I noted that I could run the Printing Merge only with English Words because when I tried other languages such as Chinese and Khmer. Most of my words became error, so I really couldn't use it as needed. Is the Printing Merge used only with English?
On the contrary, I used to use the Printing Merge in MS Word. It works with all languages. I want to use the Printing Merge in Coreldraw 12 beside English.
Whenever I perform a PrintMerge the print dialog and its options are reset everytime I leave the print dialog.
Usually you hit print set parameters and hit apply, you now can cancel the dialog and hit print again, your previous settings should still be there. Same goes if you actually print and want to repeat the print process, as long as you dont close the document. This works for normal printing but fails with print merge.
Every time I close the dialog (not the document) all the settings are back to default. This did not happen in X5 and is very annoying since it resets to default even if you actually hit print, forcing you to set the parameters every time.
I am attempting to create a tag system that will have a 5 digit number but must be printed as shown below
1
2
3
4
5
We have to create a file to be engraved that has 2000 consecutive numbers and we cannot figure out how to make them appear stacked using the merge feature.
I am having an issue with X6's print merge not recognizing a properly formatted numeric filed from my Excel spreadsheet. My first issue was that Corel was adding a decimal point after my numbers. This was when they were still formatted as text fields. (which i still don't understand why, since they were just TEXT fileds)
I know that the fields need to be "numeric" fields.
FYI i have ALREADY COMPLETED MY TASK by using an "added" numeric filed that i added IN CorelDraw and then used the "Numeric Field Options" at the bottom of the page to get my number sequence.
However, that is not my question.... my question is: How do i get corel to RECOGNIZE a numeric field AS a numeric field in the first place.
Just a guess but with 64 bit Coreldraw maybe we would be able to Print Merge large files without crashing or having to break it into digestible bits.
Do vector conversion of complex images.Use Coreldraw like a publishing program, - kick Indesign
Computer memory is no longer the issue - 32 bit computer programs are.Until then I will stay with X4. run in Windows 7, 64 bit with 12 Gigs RAM.
We are using corel x6 how can you flatten layers we are having print issues. We have a new plotter and does not recognize layers in corel and prints all black. We use many scans in our work. If we combine layers would it pile all scans on top of one another .
View 5 Replies View RelatedI've seen PDF files with layers (the same as it comes in Corel Draw - you can hide or show something etc.). Probably they were created with AutoCAD.
Is it possible to export/save CorelDraw file to such PDF with layers? For example, if I got 3 layers in my CDR then I'd like to have them in my PDF.
I tried option PUBLISH TO PDF but I didn't find (or I wasn't careful enough) any option to do this.
As a long time Adobe user, and now new user of Coreldraw X3, I am trying to figure out why, when I create a new layer on page one, that layer instantly duplicates on page two? Is there a preference that allows me to turn this off?
View 14 Replies View RelatedI was hoping this feature would be added in X6, and in retrospect I should have asked about this before they released X6 :S
When exporting to PDF in Corel it would be great if there could be an option to get rid of the layers. The problems with layers in PDF it uses a lot more resources and when I combine 20+ PDFs together it barely opens on slower computers. Also, my clients can see what my layer names are in the PDF and I would prefer if they couldn't.
I am attempting to create a graphic using corel draw that has several different layers that can be viewed separately or simultaneously. Additionally the images in each layer are hyper linked to corresponding web pages. I am running into an issue because when I print to PDF I have several layers still active however hidden.
These hidden layers contain hyperlinks which are still showing up on the PDF even when those layers are not.
Is it possible to set a line weight for a different layer, so that when you switch layers the line weight default switches with you?
View 3 Replies View RelatedI just installed X5 (and whatever patches/updates I could find) but I'm still having a problem with my layers info disappearing. I have to close the program, reopen and sometimes repeat before the layers reappear.
View 5 Replies View RelatedI'm working on a book that has watermark on all pages and jpegs too of a4 size. Working in earlier version [x5], I used to overlap all the watermarks which was located in master layer. When I used to import a fresh jpeg on new pages, the watermark went below the jpegs. What i used to do was create a new master layer and then cut pasted the watermark in that layer, and the watermark came above the jpegs in the pages that were added later. In CorelDRAW x6 this i'm not able to do.
The watermark remains bottom of the jpeg, no matter what i do. if i edit the same file in version X5, it works fine and then i get it into x6 and do rest of stuff it works fine. The watermark problem still exists.
Windows 7 [64-bit], Core i3 - 3.02 GHz, 4GB DDR 3 RAM
I´m trying to extract text from a Corel file to a TXT file in another editor and then merge it back in.Extracting the text seems to be working just fine but when I´m trying to merge it back in I get the error message "Wrong file format or could not open".
View 2 Replies View RelatedUse merge for standard things like labels.Have a large ongoing project which requires
Lots of Excel data - eg: 6685.excel example.tifcolumns x AZrows x 300 upwards
All rows required to create a book of running information.
If I use a label type approach some rows have less data making the layout uneven (unsuitable for the project)
Is there a way to merge with a fluid result ?
Ie row one takes up 2 lines Row 2 takes up 5 lines Row 3 takes up 1 line etc
0728.excel example.tif
Has any with CorelDraw X5 creating files that should be around 5 MB growing up to like 550 MB for no reason? Also have you reopened a file you had recently created and there be like 40 extra Layer 1's that are empty? I have had both of these happen. I have had work done to my machine and also reinstalled CorelDraw and those files apparently have a rogue bitmap or something in them b/c nothing is fixing it. Could be a corrupt file that a customer has sent me for their ad, but what element within a file is the culprit or if it's possible for a file to even work right if it's got a corrupt element in it?
I am losing money daily having to wait for 500 MB files to open and sometimes having to start over on ads b/c it locks my Corel up and I lose changes. Sometimes locks while saving updates and crashes.
I have the object manager pane visible at the right of my screen. It shows the layers and status of those layers in my drawing. It has the + icon that allows each layer to be expanded to show every line in that layer. The trouble I am having is that each an every time I do something in the drawing to a line it prompts the Object Manager list to expand to the full list of lines. Clicking the - icon closes this down to just the layer name.
Thing is, how do I stop it expanding the the list to the line level of detail in the first place. I rarely need that level of detail and waste lots of time closing the view down.