How do I renumber a page, starting at any number, eg 120.Reason: I have a catalog, divided into 4 files, gives the first page 1 to page 50, the second page gives the 51 to 100 and so on .. are 214 pages .. how do I get in this second part, put the number of pages, starting with page 51?
View 1 Replies
I work with CorelDraw X5 and I wonder if there is a way to insert an application of page numbering that is automatic, which automatically update the page when I add or remove a page, as in the word.I got a number through the macros but the problem is the numbers are fixed and not change. And numeracy not appear on new pages.
View 4 Replies View RelatedI need to be able to automatically number pages with a preset. Coreldraw can already do what I need using the PageNumbering macro but I have to enter the individual settings for each template every time. I simply want the included PageNumbering macro but with the option to save 5 presets. If possible I would like the option of saving the presets to a file that can be shared with other workstations so I don't have to manually recreate.
View 5 Replies View RelatedI have the page numbering macro. It works on new files; however, it doesn't work on specific saved files. What could be wrong with those files? Is there any way to enable the page numbering macro in those files?
I use Corel Draw X3, by the way.
If I would like to compose a booklet in Corel Draw, how can I insert page numbers ?
I know the use of Master Layer. But contents on it will remain unchanged for all the pages. However the page numbers should auto increase page by page.
Adobe InDesign or pagemaker is useless infront of Corel Draw. But the problem of Footer (page numbering) has to be resolevd. So that Corel Draw will replace InDesign or related book work softwares.
how to add page numbers.
I found the page number option in the prepress menu. that is coreldraw adds page number in the bottom centre to all the pages. Is it possible to edit the font and location of page number?
Till now i have been using page numbering macro that's built inside coreldraw by default. but its not dynamic. i have to do page number all by start if i delete a page in my document.
Windows 7 [64-bit], Core i3 - 3.02 GHz, 4GB DDR 3 RAM
Page No. font size change when save a cdr file from corel x6 to x5
see images
Download this image here [URL] ..........
I created a list if voucher numbering from 1001 to 1200, but when I perform the Print Merge, the list shown are with one decimal point i.e. 1001.0, 1002.0, etc....
What is the reason for this?
I was trying to make a 60x100mm voucher with numbering.
The artwork has a bitmap background.The file before I do a print merge is 2MB.
I need a running number from 1001-1200, so after I apply the print merge, it creates 200pgs of the voucher.When I try to save this file, it takes almost half an hour to do so.I think this is due to the heavy file size?In addition, the local print shop knows nothing about print merge and imposition, so I have to prepare the artwork readily in A3 size to print.The imposition creates a 10pgs files.I wanted to save this as PDF to preserve the color, but it turned out to be a nightmare (in daytime) for me that it takes more than2 hours to generate the 10pgs PDF.
I've installed Corel Draw graphics suite x3. When i'm trying to run the application, it says "To start this application for the first time or to activate, log in using an administrator-level account. From then on, you can use any user account to start this application".
View 1 Replies View Relatedsimple programme for consecutive numbering of forms while digitally printing? e.g. adding consecutive numbers to a batch of pre-printed invoice sets. One original, but numbers on it increasing or decreasing as they are printed.
View 6 Replies View RelatedI've noticed that when you press the space key to end a line when you drawing with the bézier tool, it automatically takes you to the pick tool. So if you want to draw another line right away, you have to switch back to the bézier tool. It would be nicer to have a one-step means of doing this. Does any exist?
View 7 Replies View RelatedI quite often need a separate ruler scale on each page of a multi-page document. The only way I know how to do this is to create a separate document for each drawing that requires a new scale.
I request that you add the ability to change the ruler scale on a per page basis within a single multi-page document.
I am using CDR X5 SP1.
Use merge for standard things like labels.Have a large ongoing project which requires
Lots of Excel data - eg: 6685.excel example.tifcolumns x AZrows x 300 upwards
All rows required to create a book of running information.
If I use a label type approach some rows have less data making the layout uneven (unsuitable for the project)
Is there a way to merge with a fluid result ?
Ie row one takes up 2 lines Row 2 takes up 5 lines Row 3 takes up 1 line etc
0728.excel example.tif
I'm thinking that once the perspective tool is enable the starting/ending coordinates of the fountain fill should lock relative to the shape. What ya think?
As a work around you can position the to be perspective guide shape so the starting/ending coordinates of the fountain fill at least fall close?
cs_setInnerHtml('video_5c40a7a1-4b00-4e4c-aca5-47f306588bdd','');
what's the biggest filesize in terms of pages that you people have handled? I have handled a file with 84 pages, it was 122 mb in filesize. I split it into two parts for smooth working.
Windows 7 [64-bit], Core i3 - 3.02 GHz, 4GB DDR 3 RAM
fontprob.jpg
Font Navigator was just finally working properly after giving me hell for the last few months, but now the Hotfix has broken it again. For as long as I can remember it has had a limit of about 64000 fonts in the library. All fonts are listed but once you got to the 64001st font in the list, it showed the preview for the first font in the list. Annoying, but i had about 66000 fonts in total available so it only affected a few fonts beginning with Y and Z.
Since the hotfix, it appears this 'limit' has been halved to around 32000 fonts. Which means I can't install any fonts beginning J - Z using Font Navigator any more, making it near useless. I've attached screenshots to show this.
I am using CorelDRAW X4.
I would like to make the number (1) to be aligned in the center of the box, so I select all and then (Click+C & E) as in the attached file.
I noted that I got the vertical in the center, but I got the left of horizontal a little bigger. I knew that I could get it centered both horizontally and vertically by converting texts to curves. I, however, don't want to convert it to curves because I need to edit the texts.
I've got CorelDRAW HOME & STUDENT SUITE X5. According to EULA I'm allowed to install it on 3 Computers athome. Actually X5 is installed only once on my Notebook under WinXP.
Now I'm going to upgrade the Notebook to Win7 or Win8 and re-install the CorelDRAW HOME & STUDENT SUITE X5 then. Will this re-installation be registered as a 2nd installation? If yes, how can I de-register the old XP-Installation? I plan to provide the other two installation options to my 2 children and don't want to loose one, therefore.
number 3.jpg
How would I put an outline around a number with a space between the number and outline?
Is there a method of automatically adding page numbers that will auto update as pages are moved, added, or deleted.
I often produce documents with a considerable number of pages which I am then asked to change after the first draft. I currently add page numbers manually in order to control the style etc, but there must be a better way.
I use a template for all my drawings that includes a page number in the lower right hand corner (usually says "Page 1 of 4" for example). I usually edit this number manually, which is fine for documents with a small amount of pages, but if I'm working on a large document (50+ pages) and need to re-order some pages it means editing the page number on every page manually.
Is there some way of having the number in a piece of artistic text dynamically update depending on what page number it's on?
When making numbers for the side of a race car for example, you want both the numbers to angle (lean) towards the back of the car. So on the left side of the car, the number is leaning to the right, and on the right side of the car the number is leaning left. How do you change the text to get the number to lean the way you want it too?
View 5 Replies View RelatedI'm trying to export an image to HTML.
CorelDRAW only creates 4 images out of the one CorelDRAW images.
Is there a way to reduce the number of images to one?
I have always the problem when I have to make some tickets with serial number on it.
I use some software for that job, but I don't like it. I prefer to work in CDR. I know that there are some scripts for numbering directly in Corel, but I'm not familiar with it.
I have been trying to create artwork for university style hoodies, where text is created to form the shape of a number.
I have successfully converted a number into a text box for this purpose. The text is inside and looks great.
However, I need to convert this number / text box to curves in order to keep its appearance when e-mailing. When I convert it to curves, the text shifts its position to outside of the text box. The strangest part is that it only happens with numbers that have a gap in the middle (4, 6, 8, 9 and 0).
Can any body explain why this is happening?
in coreldraw usually on small files having 7 to 8 pages i move pages by dragging its tab on the desired location. but how do i handle large files for eg moving page 49 before 15? the tabs list gets pretty long.
Windows 7 [64-bit], Core i3 - 3.02 GHz, 4GB DDR 3 RAM
I have just had to install Windows 7 64 bit and now find that when I print to my HP Business Inkjet 2300, I can only print 1 page. If I set the quantity to 5, I still get just 1 page. HP won't be updating the driver as they say that the printer is obsolete although they are still selling it.
View 2 Replies View RelatedI would like to export a page I am creating as a jpg. Right now, I have one object on the page, and its a .jpg object. When I export from the File menu, only the jpg is exported. How can I export the entire page? If I add text to the object (which will be a banner). it only exports the jpg, and and the exact space required by the text, not the entire page. I have been unable to find setting for exporting selected objects or entire page. I have another less powerful drawing program that gives options to export object, selection, or page.
If I create a box, and place it on the document, the whole thing will export, but if the pox is larger than the page, then entire box is still exported, where I only want the page dimensions exported so I can eventually arrange objects ont he box that will overlap the page dimesnsions, but only the page area should be exported as a jpg.
Should I be doing this as a powerclip? I haven't used that feature yet in CD. Then export the powerclip object?
How come the length of a page name is limited to 31 characters? Any chance this limit can be enlarged in a service pack?
View 6 Replies View RelatedI wanted to know if there is a way to convert my pdf to two page spread pngs as it is laid out? So far I can only convert it to individual pngs.
View 14 Replies View Related
