When making numbers for the side of a race car for example, you want both the numbers to angle (lean) towards the back of the car. So on the left side of the car, the number is leaning to the right, and on the right side of the car the number is leaning left. How do you change the text to get the number to lean the way you want it too?
View 5 RepliesPage No. font size change when save a cdr file from corel x6 to x5
see images
Download this image here [URL] ..........
I have been trying to create artwork for university style hoodies, where text is created to form the shape of a number.
I have successfully converted a number into a text box for this purpose. The text is inside and looks great.
However, I need to convert this number / text box to curves in order to keep its appearance when e-mailing. When I convert it to curves, the text shifts its position to outside of the text box. The strangest part is that it only happens with numbers that have a gap in the middle (4, 6, 8, 9 and 0).
Can any body explain why this is happening?
I am new to CorelDRAW. I am using it to generate scientific application notes that contain both graphics and text. I am running into a problem where I have a negative number that is close to the end of a text line (using justified format). CorelDRAW wants to treat the negative like a hyphen and keep the "-" on one line and then moves the number to the next line. For example, if the phrase "...cooling to -150 C for 5 minutes..." were to wrap across a line, it would look like:
"...cooling to -
150 C for 5 minutes..."
Instead of:
"...cooling to
-150 C for 5 minutes..."
The only way I can figure out how to get past it is to change the width of the text box so the lines wrap in different places. I have tried adding a space or two, adding hidden text (text with the same color as the background).
I know I can use the shortcut Shift F3 to bring up the Change Case Menu.
Is there a way to just highlight the text and press a shortcut or macro to change directly to UpperCase?
How can I change the default text size? I can set the size to 12 pt in three different places and choose "save settings as default", and when I place the text cursor on the page, it goes back to 24 pt. Very maddening...
View 5 Replies View Relatedwhen I try to change the font in corel draw x4, the text disappears, this happens with new documents, old documents etc.
It works in Photo Paint, but for some reason draw has stopped working. I restarted and tried everything I could think of!!! This seemed to happen after the latest windows 7 update.
Also on a sidenote is it possible to get rid of the ads when i start up Draw and PP x4? It keeps hassling me to upgrade. It is really really annoying... seriously I bought this product, why does it have pop up ads???
BDTableTextColour_v3h.gms
I have attached a free macro to change the text color of cells in a table. Without the macro there is currently no way to select more than one cell and change the text color.
The macro allows the user to either:
click on a table (to select it) and then apply a new color to ALL text in the table; or choose a new color from the macro from, select some cells in a table and then apply that color to the text in those selected cells
Please note in step 2 it is important you choose the new color first and then select the table cells. If you do it the opposite way around, while choosing a colour you will deselect the selected cells and apply color to all of the text in the table.
cs_setInnerHtml('video_ad5e34dd-845c-4786-85b1-a1ffefea52ae','');
Enter 2-3 lines of text either artistic text or paragraph text. Select and change the font for the first line only. Lets say you typed in the sample text using the Arial font and then changed the font for just the first line to Arial Black.
Now, how do you change the font for all the text to Arial Black?Now, try to change the font for all the text in the text object to Arial Black.
It is possible for me to change the font for the entire text to any other font, except the font that is used for the first line.
Even if just a single word is typed, and you change the font for just the first character in the word, you then cannot change the word's font, to the font which you used for just the first character.
Is there a way to change the default color of the Dimension lines and text? I want it to default to black not dull green! I can change it afterwards, but can't seem to find a way to change the default color.
View 1 Replies View Relatedhow do I Change the light blue color of text selection in corel x6
View 11 Replies View Relatedthis function is not functioning anymore. I may have done something to cause this but I don't recall.
Entering sizes in the text boxes does not change the object size anymore.
The only option right now is use the transform size docker...would rather not have to do that.
Also, would not like to hit F8...
Draw X5 sp2 (15.2.0.661)
I hate pressing F8 at startup!
I'm perfectly happy with the TrueType font (BankGothic Md BT), but all the style settings change to the T1 equivalent every time I close, and when I open the file again the T1 text does not show up. I can go through and reset all the styles, then re-apply them, but it wastes a lot of time.
View 1 Replies View Relatedwhat's the biggest filesize in terms of pages that you people have handled? I have handled a file with 84 pages, it was 122 mb in filesize. I split it into two parts for smooth working.
Windows 7 [64-bit], Core i3 - 3.02 GHz, 4GB DDR 3 RAM
If I would like to compose a booklet in Corel Draw, how can I insert page numbers ?
I know the use of Master Layer. But contents on it will remain unchanged for all the pages. However the page numbers should auto increase page by page.
Adobe InDesign or pagemaker is useless infront of Corel Draw. But the problem of Footer (page numbering) has to be resolevd. So that Corel Draw will replace InDesign or related book work softwares.
how to add page numbers.
fontprob.jpg
Font Navigator was just finally working properly after giving me hell for the last few months, but now the Hotfix has broken it again. For as long as I can remember it has had a limit of about 64000 fonts in the library. All fonts are listed but once you got to the 64001st font in the list, it showed the preview for the first font in the list. Annoying, but i had about 66000 fonts in total available so it only affected a few fonts beginning with Y and Z.
Since the hotfix, it appears this 'limit' has been halved to around 32000 fonts. Which means I can't install any fonts beginning J - Z using Font Navigator any more, making it near useless. I've attached screenshots to show this.
I am using CorelDRAW X4.
I would like to make the number (1) to be aligned in the center of the box, so I select all and then (Click+C & E) as in the attached file.
I noted that I got the vertical in the center, but I got the left of horizontal a little bigger. I knew that I could get it centered both horizontally and vertically by converting texts to curves. I, however, don't want to convert it to curves because I need to edit the texts.
I've got CorelDRAW HOME & STUDENT SUITE X5. According to EULA I'm allowed to install it on 3 Computers athome. Actually X5 is installed only once on my Notebook under WinXP.
Now I'm going to upgrade the Notebook to Win7 or Win8 and re-install the CorelDRAW HOME & STUDENT SUITE X5 then. Will this re-installation be registered as a 2nd installation? If yes, how can I de-register the old XP-Installation? I plan to provide the other two installation options to my 2 children and don't want to loose one, therefore.
number 3.jpg
How would I put an outline around a number with a space between the number and outline?
I found the page number option in the prepress menu. that is coreldraw adds page number in the bottom centre to all the pages. Is it possible to edit the font and location of page number?
Till now i have been using page numbering macro that's built inside coreldraw by default. but its not dynamic. i have to do page number all by start if i delete a page in my document.
Windows 7 [64-bit], Core i3 - 3.02 GHz, 4GB DDR 3 RAM
I'm trying to export an image to HTML.
CorelDRAW only creates 4 images out of the one CorelDRAW images.
Is there a way to reduce the number of images to one?
How do I renumber a page, starting at any number, eg 120.Reason: I have a catalog, divided into 4 files, gives the first page 1 to page 50, the second page gives the 51 to 100 and so on .. are 214 pages .. how do I get in this second part, put the number of pages, starting with page 51?
View 1 Replies View RelatedI have always the problem when I have to make some tickets with serial number on it.
I use some software for that job, but I don't like it. I prefer to work in CDR. I know that there are some scripts for numbering directly in Corel, but I'm not familiar with it.
Is it possible to do such a thing? Everyday I have to change the production number in the label artwork. Can I link this production number in the artwork to an external file such as an Excel datasheet?
View 3 Replies View RelatedI want to add serial number in the documents I am making to protect it from piracy... Or no, rather easier way to spot the pirate if I find my pattern floating somewhere..
To make it condensed I would like to use hexadecimal digits. So I can add a small serie of digits on a pattern piece (the pieces are tiny, averaging at about 4-5 cm, filled with information) so this is my reason of why I want hexadecimals.
I will stuff it with six digit groups for different identifiers and then revision numbers too.
On every document copy, that is, pattern sheet I would like to repeat the same digit about 4-6 times, on the major pattern pieces, and on one license paper. So the digits needs to be identical on these 4-6 times.
But of course incrementing for each copy of the pattern sheet.
Let's say the serie is 1.01.0001-00.00.00 this is the format I am going to use. All the digits could be entered manually if it has to be done but at least the 4 digits group should be automated, and hexadecimal.
Does your install count reset back to three annually? This question is for X4 and above as well.
View 4 Replies View Relatedwhy (sometimes) when I export text or graphics as .eps files to my cutter it cuts the same outline up to four to five times and ends up cutting right through the backing paper. I have been using postcut with various corel editions since 1997 with no problems until recently. It also cuts random lines through lines of text which is such an expensive pain in the ass.
I started to use the production manager in flexi sign to cut my designs and same thing happens, except for the random lines but it will make up to five cuts on some objects. All text and graphics are exported the same. Has something in corel newer versions changed in relation to this?
We are having a big problem with dropping lines of text or parts of graphics. It is happening on 3 different laser systems and 2 different printers.
View 14 Replies View RelatedOften whatever I'm working on in X4 disappears off the document page when I zoom in or out. It's still there (I can see it in the print preview)and I can print it, but I can't see it no matter what view (e.g., normal, draft, etc.) I select. If I select the entire page I can see the graphic and text handles, but nothing else. The only way I can see my work again is to save it, close the program, and then re-open the file. My computer is a Dell Precision Work Station T3400 running Vista Ultimate with an Intel Core2 Quad CPU, 4GB RAM, and my graphics card is an NVIDIA Quadro FX 570 256MB. All my software and drivers are up to date. The problem occurs no matter what screen resolution or refresh rate I'm using.
View 6 Replies View RelatedX5 Recently have begun missing parts of print out. Tried to duplicate but appears completely random.
Output to both Full colour laser and Wide Format printers will miss either text or part of objects. Today printed the text but not the text effects. Initially closed and reopened, rebooted, However this has become a now daily feature so regardless tried reprint from the same screen so next print has everything included.
Very costly and time consuming - print preview shows all correct but output is not the same.
Running Win 7 64bit 8GB Ram
02012013010.jpg
Blank Blocks behind text and graphics