CorelDRAW Graphics Suite X4 :: Number To Be Aligned In Center Of Box
May 17, 2011
I am using CorelDRAW X4.
I would like to make the number (1) to be aligned in the center of the box, so I select all and then (Click+C & E) as in the attached file.
I noted that I got the vertical in the center, but I got the left of horizontal a little bigger. I knew that I could get it centered both horizontally and vertically by converting texts to curves. I, however, don't want to convert it to curves because I need to edit the texts.
View 3 Replies
ADVERTISEMENT
Apr 7, 2012
what's the biggest filesize in terms of pages that you people have handled? I have handled a file with 84 pages, it was 122 mb in filesize. I split it into two parts for smooth working.
Windows 7 [64-bit], Core i3 - 3.02 GHz, 4GB DDR 3 RAM
View 13 Replies
View Related
Oct 29, 2011
In some previous versions, when I zoom In/Out with mouse-scroll it will zoom to mouse pointer and centre to the screen itself, but in Corel draw X5, the zoom function works properly but not center to screen the mouse-pointer and document.
View 4 Replies
View Related
Oct 10, 2007
If I would like to compose a booklet in Corel Draw, how can I insert page numbers ?
I know the use of Master Layer. But contents on it will remain unchanged for all the pages. However the page numbers should auto increase page by page.
Adobe InDesign or pagemaker is useless infront of Corel Draw. But the problem of Footer (page numbering) has to be resolevd. So that Corel Draw will replace InDesign or related book work softwares.
how to add page numbers.
View 12 Replies
View Related
Dec 27, 2012
fontprob.jpg
Font Navigator was just finally working properly after giving me hell for the last few months, but now the Hotfix has broken it again. For as long as I can remember it has had a limit of about 64000 fonts in the library. All fonts are listed but once you got to the 64001st font in the list, it showed the preview for the first font in the list. Annoying, but i had about 66000 fonts in total available so it only affected a few fonts beginning with Y and Z.
Since the hotfix, it appears this 'limit' has been halved to around 32000 fonts. Which means I can't install any fonts beginning J - Z using Font Navigator any more, making it near useless. I've attached screenshots to show this.
View 7 Replies
View Related
Mar 7, 2013
I've got CorelDRAW HOME & STUDENT SUITE X5. According to EULA I'm allowed to install it on 3 Computers athome. Actually X5 is installed only once on my Notebook under WinXP.
Now I'm going to upgrade the Notebook to Win7 or Win8 and re-install the CorelDRAW HOME & STUDENT SUITE X5 then. Will this re-installation be registered as a 2nd installation? If yes, how can I de-register the old XP-Installation? I plan to provide the other two installation options to my 2 children and don't want to loose one, therefore.
View 7 Replies
View Related
Aug 26, 2011
number 3.jpg
How would I put an outline around a number with a space between the number and outline?
View 12 Replies
View Related
Nov 26, 2011
Im trying to cut out the centre of the letter R below. Normally I break curve apart, select the centre, and trim it from the outer. I can then select the centre piece and remove it. As you can see, this has worked with the letters P & O. When I do it with the R it seems to have worked, to the point where I can even select the centre and remove it, but when I put it back over a coloured background, it is still white.
View 8 Replies
View Related
Oct 4, 2012
I'm trying to find a way to do this:
Make an object (eg an hexagon), and resize it from it's center radially, by dragging a node (and not those black squares). What I got so far, is, using the pick tool, clicking on it to go to rotation mode, hold shift and ctrl, clicking on a node (eg, from a point or the middle of a side), and dragging it.
It works IF i change it's angle, but strangely, if I keep the same angle (just resizing it), nothing happens, neither it gets resized, neither i can clone it (with right mouse click). It only keeps a blue shadow of what would be the object, without doing nothing.
What I want to do with this is, for example, create a square and an hexagon inside it, allign one of it nodes with a node of the square, and resize the hexagon by draggin another node of it until it touch (using snap to objects) another side/node of the square. As I said, it can be done if I resize by the rotation, but only if I change the angle, wich is strange for me.
Am I missing something? It's really weird that I can almost do this without problems, but then nothing happens at all. I wish I could show this visually, would be way better to explain the problem.
View 7 Replies
View Related
Apr 12, 2011
When making numbers for the side of a race car for example, you want both the numbers to angle (lean) towards the back of the car. So on the left side of the car, the number is leaning to the right, and on the right side of the car the number is leaning left. How do you change the text to get the number to lean the way you want it too?
View 5 Replies
View Related
Apr 5, 2012
I found the page number option in the prepress menu. that is coreldraw adds page number in the bottom centre to all the pages. Is it possible to edit the font and location of page number?
Till now i have been using page numbering macro that's built inside coreldraw by default. but its not dynamic. i have to do page number all by start if i delete a page in my document.
Windows 7 [64-bit], Core i3 - 3.02 GHz, 4GB DDR 3 RAM
View 5 Replies
View Related
Jan 15, 2012
I'm trying to export an image to HTML.
CorelDRAW only creates 4 images out of the one CorelDRAW images.
Is there a way to reduce the number of images to one?
View 4 Replies
View Related
Nov 20, 2012
How do I renumber a page, starting at any number, eg 120.Reason: I have a catalog, divided into 4 files, gives the first page 1 to page 50, the second page gives the 51 to 100 and so on .. are 214 pages .. how do I get in this second part, put the number of pages, starting with page 51?
View 1 Replies
View Related
Apr 23, 2011
I have always the problem when I have to make some tickets with serial number on it.
I use some software for that job, but I don't like it. I prefer to work in CDR. I know that there are some scripts for numbering directly in Corel, but I'm not familiar with it.
View 12 Replies
View Related
Jun 20, 2013
I have been trying to create artwork for university style hoodies, where text is created to form the shape of a number.
I have successfully converted a number into a text box for this purpose. The text is inside and looks great.
However, I need to convert this number / text box to curves in order to keep its appearance when e-mailing. When I convert it to curves, the text shifts its position to outside of the text box. The strangest part is that it only happens with numbers that have a gap in the middle (4, 6, 8, 9 and 0).
Can any body explain why this is happening?
View 8 Replies
View Related
Feb 29, 2012
is there a way to centre or align some content of a power clip after it had been dropped in without extracting the whole content and putting it back in ? Like using align and distribute but that seams not to include a relationship to the clip container.
View 14 Replies
View Related
Jan 5, 2012
Using the Fountain Fill, is there any way to include the lightest shade in the center of the darker shade so as to give a curved effect to a rectangle?
View 13 Replies
View Related
May 7, 2013
I'm laying out cribbage board designs for export to .dxf. I've drawn the board holes as circles but for the dxf file what I really need is a Single Point at the center of each circle.
So, is it possible to make single points in CorelDraw X4? If so, is there a way I can put a single point in the center of 300 holes at once?
View 12 Replies
View Related
Nov 9, 2011
when I select an object there is a little x that shows the center of the object, useful when trying to locate an object in an exact spot. The x is black and sometimes it is difficult to see where it is on a dark background, so is there a way to change the color of this x?
View 6 Replies
View Related
Feb 14, 2013
I need to move the edge of an object without affecting the center of that object. Is there away to achieve this.
View 5 Replies
View Related
Aug 8, 2012
the best way I can create writing in the center of this heart in the sand?
[URL]
Trying to get the words Ocean City in 2 lines and have it look as close as possible to look like it was written in the sand (without me having to drive an hour to the beach and make one myself and photograph it) although it is tempting to do!
View 8 Replies
View Related
May 19, 2012
Page No. font size change when save a cdr file from corel x6 to x5
see images
Download this image here [URL] ..........
View 2 Replies
View Related
Nov 16, 2012
Is it possible to do such a thing? Everyday I have to change the production number in the label artwork. Can I link this production number in the artwork to an external file such as an Excel datasheet?
View 3 Replies
View Related
Dec 30, 2012
I want to add serial number in the documents I am making to protect it from piracy... Or no, rather easier way to spot the pirate if I find my pattern floating somewhere..
To make it condensed I would like to use hexadecimal digits. So I can add a small serie of digits on a pattern piece (the pieces are tiny, averaging at about 4-5 cm, filled with information) so this is my reason of why I want hexadecimals.
I will stuff it with six digit groups for different identifiers and then revision numbers too.
On every document copy, that is, pattern sheet I would like to repeat the same digit about 4-6 times, on the major pattern pieces, and on one license paper. So the digits needs to be identical on these 4-6 times.
But of course incrementing for each copy of the pattern sheet.
Let's say the serie is 1.01.0001-00.00.00 this is the format I am going to use. All the digits could be entered manually if it has to be done but at least the 4 digits group should be automated, and hexadecimal.
View 3 Replies
View Related
Nov 16, 2012
I have two adjacent circles. I created two tangent lines between them on opposite sides. I want to connect the lines to the circles. So - I make the circle into a pie, and with the node editing tool, drag the nodes around until I see the little info text go from edge to "node" where it snaps on the nope of the line.
Before I start this, the lines are perfectly tangent. When complete, the lines are no longer tangent and the circle is shifted upwards, and is moved off the perfect tangent by different amount for each line. I can see a difference at 3200% and 11000% zoom at 0.5 point lines.
This occurs if I rotate the circle, or make the circle into an arc also.
It seems that when the circle is drawn, the center point about which its rotated, and from where the arcs/pies are drawn is not exactly center. This is happening when I manually rotate it. It I rotate it giving it a specific degree in the properties bar across the top, it rotates fine. For instance, repeating this again, the arcs of the circle is below one line, and above the other live by a lesser degree.
View 5 Replies
View Related
Jan 7, 2013
I was just fooling around with it one day and I made 2 guidlines intersect (one at 0 degrees and one at 90). I added a third one at 45 and tried to center it at the intersection of the first 2. It made a tiny tiny microscopic right triangle for some reason.
Also, sometimes the center is off on either the object or on the page. Like when I rotate copies of an object around another object (like making a clock face) the copies don't go perfectly all the way around. I redo it and it works fine.
Is precision an issue in CoreDRAW?
View 1 Replies
View Related
Feb 11, 2013
Does your install count reset back to three annually? This question is for X4 and above as well.
View 4 Replies
View Related
Sep 14, 2012
In X5 is there a way to change the size of the centre 'white' spot when using transparency or is it always proportional to the object size?
View 3 Replies
View Related
Jan 14, 2012
I'm creating a logo that consists of the word DIFFERENT in text and a shape, a dot (an ellipse) that I want to appear above the I and be vertically aligned with I.
How can I do this?The problem is that I can't see how to identify the point in the text - the centre of the I - to act as the target. I can't seem to get any of the Snap to Object tools to work.
I feel that I should be able to mark a specific point anywhere on a shape or an object and use those points to align.
I suspect that I could achieve the effect that I want by splitting the text characters up into individual objects, than I can align them more obviously but then I set up some other issues with kerning.
View 7 Replies
View Related
Jan 19, 2013
1. find the attached “Rays on Oval.png” file. (Tried attaching .cdr file but the File Size is 400KB.)
2. I would like to Repeat / Duplicate that Black Color on Outer Path of Oval Shape. (Like shown in the Yellow versus Black. The Yellow is a Circle and the Black is from Star Tool)
3. I think the Best Bet would be to Link the Rays to the Outer Path of Oval Shape.
4. I need the Rays and Oval as 2 Different Objects so that I could Change the Color Scheme.
View 15 Replies
View Related
Oct 6, 2011
I want to add a block with a center aligned attribute to drawing file that is not open in the autocad editor; however, the attribute alignment doesn't display when i open the drawing. But when i open the attribute editor i can verify that the alignment is set properly and then after closing the attribute editor window the alignment actually displays correctly even though no changes were made.
I read a number of other posts with the same or similar issue, but i still have been unable to get mine to display right. My code is below. What do I need to do to force the attribute alignment to display correctly?
private void centerAttribute() { var path = @"c: est.dwg"; using (var database = new Database(false, true)) { database.ReadDwgFile(path, FileShare.ReadWrite, false, password: ""); Transaction transaction = null; try { transaction = database.TransactionManager.StartTransaction();
var previousDatabase = HostApplicationServices.WorkingDatabase;
[code].........
View 4 Replies
View Related
