CorelDRAW Graphics Suite X5 :: Moving Edge Of Object Without Affecting Its Center?
Feb 14, 2013I need to move the edge of an object without affecting the center of that object. Is there away to achieve this.
View 5 Replies
ADVERTISEMENT
CorelDRAW Graphics Suite X5 :: Cutting Out Center Of Object
Nov 26, 2011Im trying to cut out the centre of the letter R below. Normally I break curve apart, select the centre, and trim it from the outer. I can then select the centre piece and remove it. As you can see, this has worked with the letters P & O. When I do it with the R it seems to have worked, to the point where I can even select the centre and remove it, but when I put it back over a coloured background, it is still white.
View 8 Replies View RelatedCorelDRAW Graphics Suite X5 :: Moving Object Up Using Shortcuts?
Mar 11, 2011in Draw X5
when I click on an object from the object manager... then I want it at the top of my drawing
so I hit Shift+PageUp
(or Ctrl+PageUp)
instead of working... it takes me to "Page 1" at the top of the object manager
HOWEVER, if I click on the thing from the canvas, it works...
this is a silly bug... the whole point of me selecting it from the object manager is so I don't have to hunt for it... because it's UNDER some other stuff.
... that's why I want it shifted to the top of the layer.
As far as I know this problem is reproducible... I'm using a circle and it's under a bunch of stuff like rectangles. I can be more specific if necessary, but it's pretty basic.
CorelDRAW Graphics Suite X6 :: Moving Object Forward And Behind Images
Dec 17, 2013Moving Object Forward and Behind Images constant PROBLEMS . we have a built in scale spinner in corel draw giving us the
Ability to pretty much work in infinity working area, why is it that we are constrained only to page area to cycle objects forward and back of other objects, why is it that I can move my logo behind bitmap within the working area but quite often can not do the same outside the working area.
it always disrupts the workflow, sometimes it seems to work when you oversave then for some reason I can move that object behind that bitmap, sometimes there are instances where I am unable to do that unless i completely restart corel draw... is that productive ?? ,
Why is it that this had not been addressed yet, I remember this being an issue I believe since corel 11 or perhaps even farther.
CorelDRAW Graphics Suite X5 :: How To Change Color Of X That Shows Center Of Object
Nov 9, 2011when I select an object there is a little x that shows the center of the object, useful when trying to locate an object in an exact spot. The x is black and sometimes it is difficult to see where it is on a dark background, so is there a way to change the color of this x?
View 6 Replies View RelatedCorelDRAW Graphics Suite X5 :: To Do Transparency All Around The Edge Of Object
May 9, 2013Is it possible to do transparency all around the edge of an object. say you had drawn a circle can you make the edge all around transparent or say make just the middle transparent?
I often find that I would love to fade out in more than one direction.
[URL]......
CorelDRAW Graphics Suite X5 :: How To Increase Text Distance From Object Edge
Sep 15, 2011test.jpg
Make a circle. With text tool click on vector and type anything.
How can I increase the default text distance from the edge of an object? I need text a bit away from circle border.
CorelDRAW Graphics Suite X5 :: Make Edge Of Coloured Object Look Frayed
Aug 16, 2011I want to make the edge of a coloured object look frayed like a pice of material.
View 5 Replies View RelatedCorelDRAW Graphics Suite X6 :: Aligning Outer Object To Outer Path Of Center Object?
Jan 19, 20131. find the attached “Rays on Oval.png” file. (Tried attaching .cdr file but the File Size is 400KB.)
2. I would like to Repeat / Duplicate that Black Color on Outer Path of Oval Shape. (Like shown in the Yellow versus Black. The Yellow is a Circle and the Black is from Star Tool)
3. I think the Best Bet would be to Link the Rays to the Outer Path of Oval Shape.
4. I need the Rays and Oval as 2 Different Objects so that I could Change the Color Scheme.
CorelDRAW Graphics Suite 12 :: Align Shape And Text Object At Center Of Shape?
Jan 14, 2012I'm creating a logo that consists of the word DIFFERENT in text and a shape, a dot (an ellipse) that I want to appear above the I and be vertically aligned with I.
How can I do this?The problem is that I can't see how to identify the point in the text - the centre of the I - to act as the target. I can't seem to get any of the Snap to Object tools to work.
I feel that I should be able to mark a specific point anywhere on a shape or an object and use those points to align.
I suspect that I could achieve the effect that I want by splitting the text characters up into individual objects, than I can align them more obviously but then I set up some other issues with kerning.
After Effects :: Moving Object Without Affecting Its Mask?
Jan 22, 2014is it possible to move a layer (with a mask) without affecting its mask position and without precomposing the layer? Much like in Photoshop, where you can achieve this by using vector masks. Let`s say I have a video-layer that has a square mask added to it. The mask is already perfectly positioned in the comp. I don`t want to move or adjust it any further. But I`m not pleased with the framing of the source material. If I`m moving the frame then, the masks moves along with it. Is there a way to get rid of this cohesion of mask and layer?
View 2 Replies View RelatedCorelDRAW Graphics Suite X5 :: Zoom And Center
Oct 29, 2011In some previous versions, when I zoom In/Out with mouse-scroll it will zoom to mouse pointer and centre to the screen itself, but in Corel draw X5, the zoom function works properly but not center to screen the mouse-pointer and document.
View 4 Replies View RelatedCorelDRAW Graphics Suite X4 :: Moving Page 49 Before 15?
Nov 8, 2011in coreldraw usually on small files having 7 to 8 pages i move pages by dragging its tab on the desired location. but how do i handle large files for eg moving page 49 before 15? the tabs list gets pretty long.
Windows 7 [64-bit], Core i3 - 3.02 GHz, 4GB DDR 3 RAM
CorelDRAW Graphics Suite X4 :: Number To Be Aligned In Center Of Box
May 17, 2011I am using CorelDRAW X4.
I would like to make the number (1) to be aligned in the center of the box, so I select all and then (Click+C & E) as in the attached file.
I noted that I got the vertical in the center, but I got the left of horizontal a little bigger. I knew that I could get it centered both horizontally and vertically by converting texts to curves. I, however, don't want to convert it to curves because I need to edit the texts.
CorelDRAW Graphics Suite X5 :: Resize From Center Using Nodes
Oct 4, 2012I'm trying to find a way to do this:
Make an object (eg an hexagon), and resize it from it's center radially, by dragging a node (and not those black squares). What I got so far, is, using the pick tool, clicking on it to go to rotation mode, hold shift and ctrl, clicking on a node (eg, from a point or the middle of a side), and dragging it.
It works IF i change it's angle, but strangely, if I keep the same angle (just resizing it), nothing happens, neither it gets resized, neither i can clone it (with right mouse click). It only keeps a blue shadow of what would be the object, without doing nothing.
What I want to do with this is, for example, create a square and an hexagon inside it, allign one of it nodes with a node of the square, and resize the hexagon by draggin another node of it until it touch (using snap to objects) another side/node of the square. As I said, it can be done if I resize by the rotation, but only if I change the angle, wich is strange for me.
Am I missing something? It's really weird that I can almost do this without problems, but then nothing happens at all. I wish I could show this visually, would be way better to explain the problem.
CorelDRAW Graphics Suite X5 :: Center Some Of PowerClip Content AFTER It Putting In
Feb 29, 2012is there a way to centre or align some content of a power clip after it had been dropped in without extracting the whole content and putting it back in ? Like using align and distribute but that seams not to include a relationship to the clip container.
View 14 Replies View RelatedCorelDRAW Graphics Suite X5 :: Moving Fonts From One Computer To Another
Mar 9, 2013I have Corel X-5 on one of my computers that uses XP- Pro and I have new computer that is using windows 7 which also has Corel X-5 on it.
I have certain fonts loaded on the Corel X-5 that is using XP and I want to move them to the new computer. There are about 200 fonts and I was wondering the best way to move them into Corel X5 that is using Windows 7
Can I just copy them to a flash drive and then install on the new computer.
The reason I am using two computers with one monitor is one of my Roland Printers will work with windows 7 but the rip software will not work with Windows 7 because there are no Windows 7 drivers for it.
Instead of spending a few thousand dollars for new rip software it is easier to just use Windows XP and even thought it is a bit of a pain to keep switching back and forth from computers for now it works just fine.
CorelDRAW Graphics Suite X3 :: Stop Moving Text?
Aug 23, 2011UA problem.cdr
Sometimes when I try to copy and paste a logo, that has text around the outside of it, the text will move from its original location. How do I get this to stop? I have attached a file that is currently doing this.
CorelDRAW Graphics Suite X4 :: Moving Objects And Guides As One?
Jan 25, 2013I often need to move (a group of) objects on a page, but with those objects I also need to move the guidelines that belong to this object. Is there a way I can lock guidelines to an object so that if I move the object, these guidelines move with it?
View 5 Replies View RelatedCorelDRAW Graphics Suite X4 :: Select Object Under Artistic Media Brush Object
Sep 17, 2011have to select an object under an artistic media brush object. i try hold down alt key when select the object under the artistic media object but it select the second object
View 2 Replies View RelatedCorelDRAW Graphics Suite X6 :: Object Styles - None For A Single Object Attribute?
Dec 9, 2012Is there a way to exclude single attributes from being defined in a object style? As example: i want to define an outline that does not change width of the objects, but everything else.
There is a small tick box right of every attribute with help text "None this object attribute is not defined by a custom style" but i can not mark it. My feeling is, that i need to switch on this tick box to get the result i need, but i can not. When i click on it, it just gives me a greyed out "Revert". When i try to make child styles, there is a way to break the connection to parent style with these tick boxes, but no luck.
Is it a bug? I tried it with X6, X6.1 and X6.2
CorelDRAW Graphics Suite X5 :: Fountain Fill With Lightest Shade In Center?
Jan 5, 2012Using the Fountain Fill, is there any way to include the lightest shade in the center of the darker shade so as to give a curved effect to a rectangle?
View 13 Replies View RelatedCorelDRAW Graphics Suite X4 :: Draw Single Point At The Center Of Each Circle
May 7, 2013I'm laying out cribbage board designs for export to .dxf. I've drawn the board holes as circles but for the dxf file what I really need is a Single Point at the center of each circle.
So, is it possible to make single points in CorelDraw X4? If so, is there a way I can put a single point in the center of 300 holes at once?
CorelDRAW Graphics Suite X5 :: Create Writing In Center Of Heart In Sand?
Aug 8, 2012the best way I can create writing in the center of this heart in the sand?
[URL]
Trying to get the words Ocean City in 2 lines and have it look as close as possible to look like it was written in the sand (without me having to drive an hour to the beach and make one myself and photograph it) although it is tempting to do!
CorelDRAW Graphics Suite X6 :: Creating Blurred Moving Image
Oct 8, 2013greg-basco-rainforest-macro-11.jpg
how to create an image to make it look like its in motion? I am trying to create an image of an arm at 45 degrees that rotates another 45 degrees that shows motion (I know the attached file is not very useful but it is the same style of motion on the butterfly's wings that I am after).
Usually the starting image is a very faint colour and the last should be solid colour but is there a way to blur/blend the colours in between to show where the image originally was and where it is now?
CorelDRAW Graphics Suite X5 :: Moving Node To Specific Coordinates?
Mar 20, 2013I have been using Corel for over 20 years, and have never needed support. I do most of my work editing nodes within a drawing for creating continuous line patterns that are repeatable.
For years I have simple "nudged" the first and last point of a complex curve to the appropriate position. Now I want to simplify that by entering in the coordinates for the node.
I have tried Object Coordinates, but it appears to do nothing after I change the node location, or radically change my design. There is no documentation for it. I have searched Customize for some sort of input field to add to the toolbar with no luck.
I always have to add the information on the coordinates of the selected note to the Status Bar, so I am surprised that I can't find an option for editing the position.
CorelDRAW Graphics Suite X5 :: Moving From Photoshop - Keyboard Shortcuts?
Jun 1, 2011I am considering a move from Photoshop and Illustrator to Photo-Paint and CorelDraw. My biggest hurdle is that I use the spacebar for panning around a document and CTRL-Spacebar for zooming.
Can the Corel products be set up to use the spacebar for a pan hand?
CorelDRAW Graphics Suite X4 :: How To Cut Outer Edge
Nov 11, 2011FBCL0017.jpg
I need to cut this football image out on my vinyl cutter, I tried boundry and contour but it keeps picking up the black center too. I need to just cut the outer edge.
CorelDRAW Graphics Suite X6 :: Ellipses / Circles / Pies And Arcs Not Rotating About Center
Nov 16, 2012I have two adjacent circles. I created two tangent lines between them on opposite sides. I want to connect the lines to the circles. So - I make the circle into a pie, and with the node editing tool, drag the nodes around until I see the little info text go from edge to "node" where it snaps on the nope of the line.
Before I start this, the lines are perfectly tangent. When complete, the lines are no longer tangent and the circle is shifted upwards, and is moved off the perfect tangent by different amount for each line. I can see a difference at 3200% and 11000% zoom at 0.5 point lines.
This occurs if I rotate the circle, or make the circle into an arc also.
It seems that when the circle is drawn, the center point about which its rotated, and from where the arcs/pies are drawn is not exactly center. This is happening when I manually rotate it. It I rotate it giving it a specific degree in the properties bar across the top, it rotates fine. For instance, repeating this again, the arcs of the circle is below one line, and above the other live by a lesser degree.
CorelDRAW Graphics Suite X5 :: Make Multiple Centers / Center Is Off In Some Objects Or On Page?
Jan 7, 2013I was just fooling around with it one day and I made 2 guidlines intersect (one at 0 degrees and one at 90). I added a third one at 45 and tried to center it at the intersection of the first 2. It made a tiny tiny microscopic right triangle for some reason.
Also, sometimes the center is off on either the object or on the page. Like when I rotate copies of an object around another object (like making a clock face) the copies don't go perfectly all the way around. I redo it and it works fine.
Is precision an issue in CoreDRAW?
CorelDRAW Graphics Suite X6 :: Crashes Unexpectedly When Moving Multiple Objects
Mar 16, 2013Today i started to experience this crash while moving multiple grouped objects. These objects were from a powertrace and had transparency. this is on vista 64bit. doesn't happen all the time.
Problem signatureProblem Event Name: APPCRASHApplication Name: CorelDRW.exeApplication Version: 16.2.0.998Application Timestamp: 50b2a2e4Fault Module Name: CdrTra.dllFault Module Version: 16.2.0.998Fault Module Timestamp: 50b2a50fException c0000005Exception Offset: 000000000003b757OS Version: 6.0.6002.2.2.0.256.6Locale ID: 1033Extra information about the problemBucket ID: 94246814
