CorelDRAW Graphics Suite X5 :: Cutting Out Center Of Object

Nov 26, 2011

Im trying to cut out the centre of the letter R below. Normally I break curve apart, select the centre, and trim it from the outer. I can then select the centre piece and remove it. As you can see, this has worked with the letters P & O. When I do it with the R it seems to have worked, to the point where I can even select the centre and remove it, but when I put it back over a coloured background, it is still white.

View 8 Replies


ADVERTISEMENT

CorelDRAW Graphics Suite X5 :: How To Change Color Of X That Shows Center Of Object

Nov 9, 2011

when I select an object there is a little x that shows the center of the object, useful when trying to locate an object in an exact spot. The x is black and sometimes it is difficult to see where it is on a dark background, so is there a way to change the color of this x?

View 6 Replies View Related

CorelDRAW Graphics Suite X5 :: Moving Edge Of Object Without Affecting Its Center?

Feb 14, 2013

I need to move the edge of an object without affecting the center of that object. Is there away to achieve this.

View 5 Replies View Related

CorelDRAW Graphics Suite X5 :: Cutting All Components Of Image Using Cutting Master 2 Plugin

Aug 1, 2011

I have downloaded an eps file, which I need to cut. I use a graphtec ce5000-60 cutter, and a plugin called cutting master 2 in order to use coreldraw.

when i select application launcher and choose cut / plot, it opens cutting master. when i do this, it only shows the 2 outer lines of the logo i need to cut. I have attached a screenshot so you can see exactly what I mean. I have tried lots of things to recitfy this, but as a complete beginner with this software, I really dont have a clue. 

View 8 Replies View Related

CorelDRAW Graphics Suite X6 :: Aligning Outer Object To Outer Path Of Center Object?

Jan 19, 2013

1. find the attached “Rays on Oval.png” file. (Tried attaching .cdr file but the File Size is 400KB.)

2. I would like to Repeat / Duplicate that Black Color on Outer Path of Oval Shape. (Like shown in the Yellow versus Black. The Yellow is a Circle and the Black is from Star Tool)

3. I think the Best Bet would be to Link the Rays to the Outer Path of Oval Shape.

4. I need the Rays and Oval as 2 Different Objects so that I could Change the Color Scheme.

View 15 Replies View Related

CorelDRAW Graphics Suite 12 :: Align Shape And Text Object At Center Of Shape?

Jan 14, 2012

I'm creating a logo that consists of the word DIFFERENT in text and a shape, a dot (an ellipse) that I want to appear above the I and be vertically aligned with I.

How can I do this?The problem is that I can't see how to identify the point in the text - the centre of the I - to act as the target. I can't seem to get any of the Snap to Object tools to work.

I feel that I should be able to mark a specific point anywhere on a shape or an object and use those points to align.

I suspect that I could achieve the effect that I want by splitting the text characters up into individual objects, than I can align them more obviously but then I set up some other issues with kerning.

View 7 Replies View Related

CorelDRAW Graphics Suite X3 :: Export Text Or Graphics As EPS Files - Vinyl Cutting?

Mar 18, 2012

why (sometimes) when I export text or graphics as .eps files to my cutter it cuts the same outline up to four to five times and ends up cutting right through the backing paper. I have been using postcut with various corel editions since 1997 with no problems until recently. It also cuts random lines through lines of text which is such an expensive pain in the ass.

I started to use the production manager in flexi sign to cut my designs and same thing happens, except for the random lines but it will make up to five cuts on some objects. All text and graphics are exported the same. Has something in corel newer versions changed in relation to this?

View 7 Replies View Related

CorelDRAW Graphics Suite X6 :: Error In Cutting Design

Dec 3, 2013

I have a problem with cutting the design, it actually prints it but not cut it. The error displays : Cut Data File Creation Error..

I'm using Corel Draw Graphics Suite X6, Raster Link, to print & cut using Mimaki CJV30-60..

What does the error actually mean & what do I need to do to resolve this?

View 2 Replies View Related

CorelDRAW Graphics Suite X4 :: Cutting Design In Half

May 5, 2011

I have a design that I would like to cut in half so that I can cut half of it at at time on my vinyl cutter.  I can't think of way to do it in Corel.

View 5 Replies View Related

CorelDRAW Graphics Suite X4 :: Cutting Lines For JPEG

May 12, 2011

A customer sent me a jpeg of a white dove that they want printed on vinyl and then contour cut to put on their travel trailer.  The picture was a very low dpi and I scanned it and increased the dpi to 150.  I tried to trace it, but it just would not come out right. 

My question is -- Can I put cutting lines around the dove as a bitmap and then be able to print and contour cut it out?

View 1 Replies View Related

CorelDRAW Graphics Suite X4 :: Cutting Master 2 Opens Behind It?

Nov 26, 2011

I just recently purchased a new computer and installed all my software. When I'm in corel draw and click on the icon to send to my plotter/cutter, the cutting Master 2 plug-in opens behind corel draw.  It always opened in front of my corel screen on my older pc.  how to get it to open in front of corel?

View 2 Replies View Related

CorelDRAW Graphics Suite X5 :: Cutting Large Images

Aug 1, 2011

Im new to both coreldraw, and to the graphtec cutter, so my problem may have a very simple answer. Ive been playing around with it, learning how things work. Smaller images are no problem, but Im having trouble cutting larger images.

the plotter can cut up to a width of 610mm, and Im using 610mm vinyl. I need to cut some items that are 600mm wide. First time I tried, it left a gap on the left side of approx 50mm. It also stopped cutting approximately 20mm from the right side. next time, I loaded the vinyl into the machine 45mm further right and tried again. this time the left hand edge was positioned where I expected, but the right side still stopped in the same place as previously, leaving a gap of around 70mm on the right hand side. you would think I was trying to cut something bigger than the capacity of the cutter, but obviously this isnt the case.

if I have missed any necessary information etc, Im very new to all of this.

View 7 Replies View Related

CorelDRAW Graphics Suite 12 :: Color Separations For Vinyl Cutting

Jul 4, 2011

I have a Roland SP54 with VersaWorks.

I design everything in CorelDraw and want to know how one goes about doing a color separation for cutting just the vinyl,

E.g. I have a 3 color design that I need to cut 3 different color sheets of vinyl. How do I go about setting up to cut?

View 10 Replies View Related

CorelDRAW Graphics Suite 11 :: Double Cutting And Slow Running?

Sep 20, 2011

Have recently upgraded to corel 11, from 9, but at the same time upgraded my computer.

When I try to plot a simple circle shape on my Roland CM24 the image cuts twice and is extremely slow (juddering).

I believe the double cut is caused by the hairline & fill but messing around have only gone from double cutting each shape individually to do double cutting the whole image.

View 2 Replies View Related

CorelDRAW Graphics Suite X3 :: Preparing Images For Plasma Cutting Metal Art?

Dec 2, 2007

Using Corel to prepare images for cutting on a CNC plasma table. any easiest way to prepare images for cutting. With merging images, Lettering and original art work transfer. I need to convert to a DXF format to drop into the machine program (Sheetcam). I have used trace with some success. By this, I mean that the image "looked" good, but I seem to be doing something wrong because the graphic will not run on the machine.

View 3 Replies View Related

CorelDRAW Graphics Suite X4 :: How To Get Crop Marks For Cutting Multi Items

Jul 15, 2010

When I step & repeat the crop marks are not there. How I get the crop marks for cutting multi up items.

View 5 Replies View Related

CorelDRAW Graphics Suite X4 :: Registration Marks On All Layers For Vinyl Cutting

Aug 3, 2011

Using CD x4.I cut directly from Corel.  I was trying to do a simple 2 color vinyl job. I put reg marks but they are only on one layer. I tried copying but they weren't in the same place as the other layer.

Is there a way to get the Reg Marks to appear on all layers properly ?

View 5 Replies View Related

CorelDRAW Graphics Suite 12 :: Creating Outline Color For Contour Cutting?

Jul 2, 2011

Is there a way to change the outline color around a large group of images all at once?

I am trying to create an outline color for contour cutting and I have the outline color in my spot colors but now I was wondering if I could apply these change to all the images at once instead of changing each one.

View 2 Replies View Related

CorelDRAW Graphics Suite X5 :: Vinyl Cutter Cannot Close Edges When Cutting

Jun 19, 2012

when i cut vectors letters and numbers, its cuts but at every character it does not seem to completely fill the edges. so i always have to use my small nt cutter to do that.

i read the manuals, changed the offset, reduced the cut speed, increased the pressure and even convert to curves before i cut but the problem does not go away. the company where i bought it from is not very useful.

maybe because the machine is chinese i have a creation pcut ct630 vinyl cutter.also in coreldraw, i always use "harline" when cutitng anything is it correct?

Creation pcut ct 630 vinyl cutter

View 5 Replies View Related

CorelDRAW Graphics Suite X5 :: Zoom And Center

Oct 29, 2011

In some previous versions, when I zoom In/Out with mouse-scroll it will zoom to mouse pointer and centre to the screen itself, but in Corel draw X5, the zoom function works properly but not center to screen the mouse-pointer and document. 

View 4 Replies View Related

CorelDRAW Graphics Suite X4 :: Number To Be Aligned In Center Of Box

May 17, 2011

I am using CorelDRAW X4.

I would like to make the number (1) to be aligned in the center of the box, so I select all and then (Click+C & E) as in the attached file.

I noted that I got the vertical in the center, but I got the left of horizontal a little bigger. I knew that I could get it centered both horizontally and vertically by converting texts to curves. I, however, don't want to convert it to curves because I need to edit the texts.

View 3 Replies View Related

CorelDRAW Graphics Suite X5 :: Resize From Center Using Nodes

Oct 4, 2012

I'm trying to find a way to do this:

Make an object (eg an hexagon), and resize it from it's center radially, by dragging a node (and not those black squares). What I got so far, is, using the pick tool, clicking on it to go to rotation mode, hold shift and ctrl, clicking on a node (eg, from a point or the middle of a side), and dragging it.

It works IF i change it's angle, but strangely, if I keep the same angle (just resizing it), nothing happens, neither it gets resized, neither i can clone it (with right mouse click). It only keeps a blue shadow of what would be the object, without doing nothing.

What I want to do with this is, for example, create a square and an hexagon inside it, allign one of it nodes with a node of the square, and resize the hexagon by draggin another node of it until it touch (using snap to objects) another side/node of the square. As I said, it can be done if I resize by the rotation, but only if I change the angle, wich is strange for me.

Am I missing something? It's really weird that I can almost do this without problems, but then nothing happens at all. I wish I could show this visually, would be way better to explain the problem.

View 7 Replies View Related

CorelDRAW Graphics Suite X5 :: Center Some Of PowerClip Content AFTER It Putting In

Feb 29, 2012

is there a way to centre or align some content of a power clip after it had been dropped in without extracting the whole content and putting it back in ? Like using align and distribute but that seams not to include a relationship to the clip container.

View 14 Replies View Related

CorelDRAW Graphics Suite X4 :: Select Object Under Artistic Media Brush Object

Sep 17, 2011

have to select an object under an artistic media brush object. i try hold down alt key when select the object under the artistic media object but it select the second object

View 2 Replies View Related

CorelDRAW Graphics Suite X6 :: Object Styles - None For A Single Object Attribute?

Dec 9, 2012

Is there a way to exclude single attributes from being defined in a object style? As example: i want to define an outline that does not change width of the objects, but everything else.

There is a small tick box right of every attribute with help text "None   this object attribute is not defined by a custom style" but i can not mark it. My feeling is, that i need to switch on this tick box to get the result i need, but i can not. When i click on it, it just gives me a greyed out "Revert". When i try to make child styles, there is a way to break the connection to parent style with these tick boxes, but no luck.

Is it a bug? I tried it with X6, X6.1 and X6.2

View 1 Replies View Related

CorelDRAW Graphics Suite X5 :: Fountain Fill With Lightest Shade In Center?

Jan 5, 2012

Using the Fountain Fill, is there any way to include the lightest shade in the center of the darker shade so as to give a curved effect to a rectangle? 

View 13 Replies View Related

CorelDRAW Graphics Suite X4 :: Draw Single Point At The Center Of Each Circle

May 7, 2013

I'm laying out cribbage board designs for export to .dxf.  I've drawn the board holes as circles but for the dxf file what I really need is a Single Point at the center of each circle. 

So, is it possible to make single points in CorelDraw X4?  If so, is there a way I can put a single point in the center of 300 holes at once? 

View 12 Replies View Related

CorelDRAW Graphics Suite X5 :: Create Writing In Center Of Heart In Sand?

Aug 8, 2012

the best way I can create writing in the center of this heart in the sand?

[URL]

Trying to get the words Ocean City in 2 lines and have it look as close as possible to look like it was written in the sand (without me having to drive an hour to the beach and make one myself and photograph it) although it is tempting to do!

View 8 Replies View Related

CorelDRAW Graphics Suite X6 :: Ellipses / Circles / Pies And Arcs Not Rotating About Center

Nov 16, 2012

I have two adjacent circles.  I created two tangent lines between them on opposite sides.  I want to connect the lines to the circles.  So - I make the circle into a pie, and with the node editing tool, drag the nodes around until I see the little info text go from edge to "node" where it snaps on the nope of the line.

Before I start this, the lines are perfectly tangent.  When complete, the lines are no longer tangent and the circle is shifted upwards, and is moved off the perfect tangent by different amount for each line.  I can see a difference at 3200% and 11000% zoom at 0.5 point lines.

This occurs if I rotate the circle, or make the circle into an arc also.

It seems that when the circle is drawn, the center point about which its rotated, and from where the arcs/pies are drawn is not exactly center.  This is happening when I manually rotate it.  It I rotate it giving it a specific degree in the properties bar across the top, it rotates fine.  For instance, repeating this again, the arcs of the circle is below one line, and above the other live by a lesser degree.

View 5 Replies View Related

CorelDRAW Graphics Suite X5 :: Make Multiple Centers / Center Is Off In Some Objects Or On Page?

Jan 7, 2013

I was just fooling around with it one day and I made 2 guidlines intersect (one at 0 degrees and one at 90). I added a third one at 45 and tried to center it at the intersection of the first 2. It made a tiny tiny microscopic right triangle for some reason.

Also, sometimes the center is off on either the object or on the page. Like when I rotate copies of an object around another object (like making a clock face) the copies don't go perfectly all the way around. I redo it and it works fine.  

Is precision an issue in CoreDRAW? 

View 1 Replies View Related

CorelDRAW Graphics Suite X5 :: Transparency Settings - Change Size Of Center White Spot

Sep 14, 2012

In X5 is there a way to change the size of the centre 'white' spot when using transparency or is it always proportional to the object size?

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved