Is there a way to change the outline color around a large group of images all at once?
I am trying to create an outline color for contour cutting and I have the outline color in my spot colors but now I was wondering if I could apply these change to all the images at once instead of changing each one.
URL....On that image, I want to adjust the tickness of the thin white line.There is only 1 contour step.
View 2 Replies View RelatedI am trying to create the cut contour line in X6 and cannot find information on how to do it anywhere.
View 13 Replies View RelatedI was comparing a few drafting and was curious if CorelDraw X6 had the ability to create contour plots using 3-dimensional spatial data (e.g., topographic surveys). Basically, what I was looking to do was import a table (say from excel) with a number of data points which each have three coordinate locations (X, Y, Z). I would be looking for the program to take these data points and be able to draw lines or shading between them in essentially what would be a topographic map (contour map). In the past, I have used another program called Surfer to create the contour maps, and have then had to import the exported image to an older version of CorelDraw.
View 5 Replies View RelatedI have a Roland SP54 with VersaWorks.
I design everything in CorelDraw and want to know how one goes about doing a color separation for cutting just the vinyl,
E.g. I have a 3 color design that I need to cut 3 different color sheets of vinyl. How do I go about setting up to cut?
On the bottom page the outline box has a white vertical square/line on the right of it. Since this happened my outlines are transparent when place on top of other objects. How can I fix this to get it back to soid colored lines.
View 14 Replies View RelatedI still use Corel Draw 12 and my question is is there an easy or automatic way to make the outline color of an object the same color as the fill color? I do it the hard way of trial and error until I get the right outline color from the color dock/pallette.
View 10 Replies View RelatedHow do you color the outline of a closed object in different colors in Draw . I have a green triangle which is part of a witches hat....... I have colored the outline in the same green as the fill but I would like to keep the bottom line (curved) black to define it against the hat brim. Is there a way to keep this line black when I make the others green......otherwise I have to draw it in again.
View 5 Replies View RelatedI have downloaded an eps file, which I need to cut. I use a graphtec ce5000-60 cutter, and a plugin called cutting master 2 in order to use coreldraw.
when i select application launcher and choose cut / plot, it opens cutting master. when i do this, it only shows the 2 outer lines of the logo i need to cut. I have attached a screenshot so you can see exactly what I mean. I have tried lots of things to recitfy this, but as a complete beginner with this software, I really dont have a clue.
I set the outline color to red. You can see that it's not working. I just see a small red square at middle left side only.
View 14 Replies View RelatedI want to create and name my own colors. To start with, I put the default RGB palette into "show color names" mode, and I then intend to add to the palette colors which I have named for my own purposes, and then delete the colors I dont need.
I have put the palette so it floats, which is more convenient for me, and I want to extend the palette down so that I can see most of the color names immediately, for example this is easy to do in CorelPainter.
I find that I cant extend the floating palette window beyond the default size, even though, when I select the window, arrows appear at the edges and corners of the palette, as if it is possible to move them. I find that the whole desktop turns grey, and a sort of secondary palette window appears momentarily and flutters on and off.
why (sometimes) when I export text or graphics as .eps files to my cutter it cuts the same outline up to four to five times and ends up cutting right through the backing paper. I have been using postcut with various corel editions since 1997 with no problems until recently. It also cuts random lines through lines of text which is such an expensive pain in the ass.
I started to use the production manager in flexi sign to cut my designs and same thing happens, except for the random lines but it will make up to five cuts on some objects. All text and graphics are exported the same. Has something in corel newer versions changed in relation to this?
I am making vinyl decals and for some reason I am so confused about "contour and cut" which is which ? I need to know how to put a line around an object that will be a cut line .
View 3 Replies View RelatedI cant figure out how to contour my images so it only cuts my outline when I send it to my graphtec cutter, I have a Graphtec CE5000-60 cutter plotter, Corel Draw Graphics Suite X5, and Windows 7.
View 6 Replies View Relatedwhen using contour tool (to inside of object) it defaults to the max allowed according to the setting, and grays out "number of steps", how do you change to say you want ONE contour at say .015"?...my X3 will allow this, but NOT the trial I am using of X5.
View 11 Replies View RelatedMy CorelMacros.CreateColorSwatch macro has stopped dumping the swatches into whatever blank Letter-sized document I have open (which is how it used to work) and instead it is creating a new document, at 4.25" wide x 7" high, and dumping the swatches into that. Using Pantone Solid Coated, but it's doing this regardless of what palette I choose.
There is no option in the Macro's dialog box to alter or even instantiate a page size, and I cannot find in the code of the macro where to set this variable.
Contour on a bitmap shape.
I thought this was doable. Today I found it's not, or stopped working.
"The best thing about learning is that it never stops, and the rabbit hole will go as deep as you let it.[URL]
I haven't experienced my contour offset 'jumping' in too large increments.....BUT
my contour offset tool is not working like it used to.
Only rarely would I receive the message 'contour offset too large' when offsetting a bezier curve .025"
Whenever this would happen I would then reduce my nodes or convert them to cusp or smooth. This would almost always fix the 'countour offset too large' problem.
I've reset Coreldraw to factory default but still have this problem with certain lines.
All of my software is up to date.
CorelDraw X5
27" iMac, Bootcamp, Windows 7
I am new to Coral Draw x5, and we have just purchased a Roland VersaCamm vs-420, I have an eps file, once i am ready to create a cutline i click shaping > Boundary thats all good, then i can get my cut contour line which is around the image, how can i increase the cut line so i have a 1/2mm white gap around the file im cutting?
View 1 Replies View RelatedProblem getting the Contour Docker to open? Menu option is there in the Window/Dockers menu, but doesn't seem to work on my system.
View 7 Replies View RelatedI have a problem with cutting the design, it actually prints it but not cut it. The error displays : Cut Data File Creation Error..
I'm using Corel Draw Graphics Suite X6, Raster Link, to print & cut using Mimaki CJV30-60..
What does the error actually mean & what do I need to do to resolve this?
Im trying to cut out the centre of the letter R below. Normally I break curve apart, select the centre, and trim it from the outer. I can then select the centre piece and remove it. As you can see, this has worked with the letters P & O. When I do it with the R it seems to have worked, to the point where I can even select the centre and remove it, but when I put it back over a coloured background, it is still white.
View 8 Replies View RelatedI have a design that I would like to cut in half so that I can cut half of it at at time on my vinyl cutter. I can't think of way to do it in Corel.
View 5 Replies View RelatedA customer sent me a jpeg of a white dove that they want printed on vinyl and then contour cut to put on their travel trailer. The picture was a very low dpi and I scanned it and increased the dpi to 150. I tried to trace it, but it just would not come out right.
My question is -- Can I put cutting lines around the dove as a bitmap and then be able to print and contour cut it out?
I just recently purchased a new computer and installed all my software. When I'm in corel draw and click on the icon to send to my plotter/cutter, the cutting Master 2 plug-in opens behind corel draw. It always opened in front of my corel screen on my older pc. how to get it to open in front of corel?
View 2 Replies View RelatedIm new to both coreldraw, and to the graphtec cutter, so my problem may have a very simple answer. Ive been playing around with it, learning how things work. Smaller images are no problem, but Im having trouble cutting larger images.
the plotter can cut up to a width of 610mm, and Im using 610mm vinyl. I need to cut some items that are 600mm wide. First time I tried, it left a gap on the left side of approx 50mm. It also stopped cutting approximately 20mm from the right side. next time, I loaded the vinyl into the machine 45mm further right and tried again. this time the left hand edge was positioned where I expected, but the right side still stopped in the same place as previously, leaving a gap of around 70mm on the right hand side. you would think I was trying to cut something bigger than the capacity of the cutter, but obviously this isnt the case.
if I have missed any necessary information etc, Im very new to all of this.
I am having trouble with some of the dockers. Some of them when i go to window dockers and click on them come up just fine, but there are a few and don't come up at all. Like Contour or Text Properties.
View 3 Replies View RelatedAcceleration in the Contour Docker is back to front (or is it just me) ie. Object Acceleration accelerates Colour and Colour accelerates Object.
View 3 Replies View RelatedHave recently upgraded to corel 11, from 9, but at the same time upgraded my computer.
When I try to plot a simple circle shape on my Roland CM24 the image cuts twice and is extremely slow (juddering).
I believe the double cut is caused by the hairline & fill but messing around have only gone from double cutting each shape individually to do double cutting the whole image.
Contour.jpg
Would like to have it default to 'Outside contour' mode and have the value changed to a smaller more manageable value.
Ive got a image(Fill K-100) in a vector format that i'm wanting to have a faded contour inside from White(C-0 M-0 Y-0 K-0) to Red(M-100)
I can get it to have a single color fade but not from white center to red "glow" around the white.