when using contour tool (to inside of object) it defaults to the max allowed according to the setting, and grays out "number of steps", how do you change to say you want ONE contour at say .015"?...my X3 will allow this, but NOT the trial I am using of X5.
View 11 Replies
Contour.jpg
Would like to have it default to 'Outside contour' mode and have the value changed to a smaller more manageable value.
I am making vinyl decals and for some reason I am so confused about "contour and cut" which is which ? I need to know how to put a line around an object that will be a cut line .
View 3 Replies View RelatedI cant figure out how to contour my images so it only cuts my outline when I send it to my graphtec cutter, I have a Graphtec CE5000-60 cutter plotter, Corel Draw Graphics Suite X5, and Windows 7.
View 6 Replies View RelatedContour on a bitmap shape.
I thought this was doable. Today I found it's not, or stopped working.
"The best thing about learning is that it never stops, and the rabbit hole will go as deep as you let it.[URL]
I haven't experienced my contour offset 'jumping' in too large increments.....BUT
my contour offset tool is not working like it used to.
Only rarely would I receive the message 'contour offset too large' when offsetting a bezier curve .025"
Whenever this would happen I would then reduce my nodes or convert them to cusp or smooth. This would almost always fix the 'countour offset too large' problem.
I've reset Coreldraw to factory default but still have this problem with certain lines.
All of my software is up to date.
CorelDraw X5
27" iMac, Bootcamp, Windows 7
I am trying to create the cut contour line in X6 and cannot find information on how to do it anywhere.
View 13 Replies View RelatedI am new to Coral Draw x5, and we have just purchased a Roland VersaCamm vs-420, I have an eps file, once i am ready to create a cutline i click shaping > Boundary thats all good, then i can get my cut contour line which is around the image, how can i increase the cut line so i have a 1/2mm white gap around the file im cutting?
View 1 Replies View RelatedProblem getting the Contour Docker to open? Menu option is there in the Window/Dockers menu, but doesn't seem to work on my system.
View 7 Replies View RelatedI was comparing a few drafting and was curious if CorelDraw X6 had the ability to create contour plots using 3-dimensional spatial data (e.g., topographic surveys). Basically, what I was looking to do was import a table (say from excel) with a number of data points which each have three coordinate locations (X, Y, Z). I would be looking for the program to take these data points and be able to draw lines or shading between them in essentially what would be a topographic map (contour map). In the past, I have used another program called Surfer to create the contour maps, and have then had to import the exported image to an older version of CorelDraw.
View 5 Replies View RelatedI am having trouble with some of the dockers. Some of them when i go to window dockers and click on them come up just fine, but there are a few and don't come up at all. Like Contour or Text Properties.
View 3 Replies View RelatedAcceleration in the Contour Docker is back to front (or is it just me) ie. Object Acceleration accelerates Colour and Colour accelerates Object.
View 3 Replies View RelatedURL....On that image, I want to adjust the tickness of the thin white line.There is only 1 contour step.
View 2 Replies View RelatedIs there a way to change the outline color around a large group of images all at once?
I am trying to create an outline color for contour cutting and I have the outline color in my spot colors but now I was wondering if I could apply these change to all the images at once instead of changing each one.
Ive got a image(Fill K-100) in a vector format that i'm wanting to have a faded contour inside from White(C-0 M-0 Y-0 K-0) to Red(M-100)
I can get it to have a single color fade but not from white center to red "glow" around the white.
When i tried to add an inside contour to a simple square with rounded corners......the inside contour is missing the rounded corners but when you add a contour to the outside of the square with rounded corners...the corners are round.
View 4 Replies View RelatedMy tool box specifically- the bar which lists commands like print or save--- is suddenly gone--- don't know how to get it back with no commands to call it up
View 3 Replies View RelatedWhen i install my Corel draw 12 from cd it crashes when i use a tool
I remember that i needed to update it but those updates are gone from the Corel .com site
Corel 10 works fine. Where I can get the updates,
My version of build is 12.0.0.458
I have been using CorelDraw X6 for a couple of days now (Trial version) on a Windows 7 v32 machine. I noticed a bug in the transformation tool (Alt F10). Every time that I input a number or value on the transformation box and then press enter on my keyboard it does not change the size of my object. The only way to make it work is inputting the value and then press the apply key (I had have no problems in the pass inputting values and then changing by pressing enter on my keyboard in CorelDraw X5 whatsoever.
View 3 Replies View RelatedJust checking thru all the stuff that I never got around to using and stumbled across the Interactive Connector Tool (ICT). However, when I try to use it, I can only get one end of the connection to actually latch onto an object. To fix the other end to another object, I apparently would have to make it the active object so that I could connect to - or even see - the nodes. But when I tried selecting both objects, the 2nd (connect to) object lost focus on my selecting the node of the connect from object with the ICT. Each time I end up with a line that is fixed to a point on the background as the connect to point and the connect from object on the other end.
View 6 Replies View RelatedI'm using CD X5, (I own it, not the trial download) and the Effects/Add Perspective menu choice is greyed out. ! Not selectable. I select the photo I want to change persp but the option is not available. I did reset the interface by pressing F8 upon load and it did change to default but still no perspective option.
Win 7 home Premium 64bit
I should add that this is the Home - Student version. Should that be any different? Nothing else has been ... yet anyway!
OK Where is it? It is not in any of the tools listed, I have mine down the left side of the page. Do I need to go somewhere else and add the tool to the tool box?
View 8 Replies View RelatedThe brush tool is no longer working - when I select on any of the brush tools, spray, Art burhs, spray , line, marker etc, they will not work. When I select the drop down nothing is listed. Additionally, none of the other tools in the box, Effect Tool, Image Sprayer too ect, do not work as well. Did I select something to turn off the tool?
I've tried to uninstall and re-install and that did not work.
Turn off snap to objects.Now select a dimension tool and draw either a vertical or horizontal dimension line.Now notice the snapping to objects is re-enabled.How can I stop this from happening without having to keep turning of snapping while in dimensioning mode?This looks like a glitch in X4 because I don't see this problem in X5.
View 4 Replies View RelatedWhen I try to draw an ellipse (or circle) and drag it on to my sheet, nothing happens. All of my other shape tools work as they should. What has happened. It worked originally.
View 4 Replies View RelatedIs there anyway to change the Dimension tool pre sets?... i.e. color of line. type of arrow head, etc?
At the moment i have to change them every time i use the tool!
Level Equalization was a tool that I used constantly in PhotoPaint 8. By version 10, it had disappeared for no obvious reason. It was a really vauable tool. Fortunately, I still have PhotoPaint 8 on the system, but it tends to introduce other problems, so I rarely go back to it. It would be handy to have that tool back. X3 has something called Local Equalization and another option called Histogram Equalization, neither of which seems to do anything useful.
In fact, both Histogram Equalization and Local Equalization thoroughly screw up any image that I test on them. I don't have a clue as to why they are even there, since they absolutely don't work, whereas the original Level Equalization worked really well.
When I am using the eraser tool in correldraw x5, I get a crash from time to time.
This crash causes my correldraw to completely shutdown with a message that an unexpected error has occured and that the program had to be closed.
Working with important information, this is a big issue for me.
I work on CorelDraw X5, I have problems while printing an object with interactive transparent effect applied.I've converted the object to bitmap more times to apply different transparent effect in different direction.
Now when I print the file there are errors on the points highlighted by red circles. URL....I don't remember in the past to have had problems with CorelDraw 10 to use this effect.
I have been drawing the drafting lines and measurements manually and noticed the dimensions tool. Works great but when I shrink the layout for proofing the measurements change. Is there a setting that I can select that will keep the actual measurements of the drawing no matter how I resize it for proofing?
View 9 Replies View RelatedFor years I have used the clone tool happily which has been great for touching up photo's on Photo-paint 12
A few days ago - imported a jpg into Paint as usual, went to use the clone tool and it just doesn't work any more. I can select the icon and the little circles come up but it just doesn't 'clone' anything. Its as if there is mysterious setting that has been turned on that just makes nothing happen.
I have reinstalled the software: no luck - still the same.
