Turn off snap to objects.Now select a dimension tool and draw either a vertical or horizontal dimension line.Now notice the snapping to objects is re-enabled.How can I stop this from happening without having to keep turning of snapping while in dimensioning mode?This looks like a glitch in X4 because I don't see this problem in X5.
View 4 RepliesIs there anyway to change the Dimension tool pre sets?... i.e. color of line. type of arrow head, etc?
At the moment i have to change them every time i use the tool!
I have been drawing the drafting lines and measurements manually and noticed the dimensions tool. Works great but when I shrink the layout for proofing the measurements change. Is there a setting that I can select that will keep the actual measurements of the drawing no matter how I resize it for proofing?
View 9 Replies View RelatedMy dimension tool seems to do whatever it wants. I will start with certain settings such as U.S. Architectural but then later it will default back to Fractional and any other settings will be changed back. How do I keep it at what I want?
View 7 Replies View RelatedX4 user here that upgraded to X6 a few weeks ago. One thing that's blowing my gord is having my dimensions "lock" to guidelines and/or objects -- My dimensions aren't locked in the classic sense, i understand how to lock a dimension in corel. What i mean every time i create a dimension with master guides, and then try to move my guides, my dimension moves with it.
The worst of it is that i'm mostly getting them linked to master guidelines, so when i create a new page, say page 2, and want to move a master guide, i go back to page 1, and it has messed up all my dimensions.
And no, i do not want to break my dimension apart, I need it to stay as a working dimension!
This is probably simple, but I cannot find how do display dimensions on both feet and inches.
Currently my dimensions display as a decimal (ie 12.5' ). I would like both feet and inches (ie 12' 6" )
Where do I change this, turn on option?
why the dimension tool now appears in blue? how to change it back in black?
View 8 Replies View Relateddimension tool.jpg
See the figure below.
Is there any way to adjust the dimensions, when dragged, with regular distance from object?
See differences by red arrows. The intention is that dimensions keep a pre-set regular distance.
Experiencing problems with the dimension tool since upgrading to Corel Draw X6 at this end, which hasn't been resolved with the updates.
I work in mm. The system doesn't remember the default settings if I change my preferences for it to measure in mm via the customisation window or the toolbox as it used to in previous versions. When I open the program again or start a new document, the measurement default keeps changing back to ["] (inches). Sometimes, it will jump back to inches after I change the default to mm when I'm working on the same document.
Same problem seems to be happening with the other units of measure available as well.
Current workaround - the only time it seems to remember my settings is if I change the default to mm and then save a document.
I can fwd a video screen capture which shows the problem if that would work.
While keeping snapping to object command switched on, CorelDRAW refers to the center line of the outlines of objects for snapping. That is if I have 2 rectangles with 0.5 line weight each and if I move on close to another so that the gap between them is zero, then while doing snapping, the outlines of these two rectangles get overlapped which I don’t want.
Windows 7 [64-bit], Core i3 - 3.02 GHz, 4GB DDR 3 RAM
As a laser engraver I rely on moving the object to engrave to the top Left of the Page before sending to the laser.
In X4 I have an addon program called EngravePro. With this I can use the shortcut H to snap to top left of page.
This addon is not available for X6.
Is there another way to do this with a simple shortcut key?
I have tried to use the Macro recorder to record the keystrokes as I get the dimensions from the top of the rectangle to each line of text & from the edge of the triangle to each line of text. Unfortunately the recorder could not record.
Is it possible to design a macro which can be used to get the dimensions as required ?
Dimension Issue while Exporting.png
Why am I not getting Exact and Accurate Dimension while Exporting the file to PSD Format? Do I need to Enable or Disable something?
I create a new black document with rendering resolution set to 150dpi.
If I export the artwork as JPEG, and check "Maintain Size", I'll get the artwork in correct dimension and resolution. However, if I export as TIFF, the resolution by default is 72dpi, and if I increase the resolution to 150dpi, the dimension reduces accordingly, ending up with a smaller bitmap exported.
I am looking for a (preferably free) Auto Dimension Macro for X6.
View 5 Replies View RelatedWe like to put our dimension lines in CorelDraw 5 on separate layers from the objects being dimensioned. This way we can turn the dimensions ON/OFF depending on our needs. Unfortunately, we find that the dimensions for these objects do not move with the objects on the other layer. We have also found that certain edit operations seem to break the link between the objects on one layer and their dimensions on another layer.
How we can maintain our dimension lines on one layer, the objects on another, and prevent the problems described above?
Is there a way to change the default color of the Dimension lines and text? I want it to default to black not dull green! I can change it afterwards, but can't seem to find a way to change the default color.
View 1 Replies View RelatedMy tool box specifically- the bar which lists commands like print or save--- is suddenly gone--- don't know how to get it back with no commands to call it up
View 3 Replies View RelatedWhen i install my Corel draw 12 from cd it crashes when i use a tool
I remember that i needed to update it but those updates are gone from the Corel .com site
Corel 10 works fine. Where I can get the updates,
My version of build is 12.0.0.458
I have been using CorelDraw X6 for a couple of days now (Trial version) on a Windows 7 v32 machine. I noticed a bug in the transformation tool (Alt F10). Every time that I input a number or value on the transformation box and then press enter on my keyboard it does not change the size of my object. The only way to make it work is inputting the value and then press the apply key (I had have no problems in the pass inputting values and then changing by pressing enter on my keyboard in CorelDraw X5 whatsoever.
View 3 Replies View Relatedwhen using contour tool (to inside of object) it defaults to the max allowed according to the setting, and grays out "number of steps", how do you change to say you want ONE contour at say .015"?...my X3 will allow this, but NOT the trial I am using of X5.
View 11 Replies View RelatedJust checking thru all the stuff that I never got around to using and stumbled across the Interactive Connector Tool (ICT). However, when I try to use it, I can only get one end of the connection to actually latch onto an object. To fix the other end to another object, I apparently would have to make it the active object so that I could connect to - or even see - the nodes. But when I tried selecting both objects, the 2nd (connect to) object lost focus on my selecting the node of the connect from object with the ICT. Each time I end up with a line that is fixed to a point on the background as the connect to point and the connect from object on the other end.
View 6 Replies View RelatedI'm using CD X5, (I own it, not the trial download) and the Effects/Add Perspective menu choice is greyed out. ! Not selectable. I select the photo I want to change persp but the option is not available. I did reset the interface by pressing F8 upon load and it did change to default but still no perspective option.
Win 7 home Premium 64bit
I should add that this is the Home - Student version. Should that be any different? Nothing else has been ... yet anyway!
OK Where is it? It is not in any of the tools listed, I have mine down the left side of the page. Do I need to go somewhere else and add the tool to the tool box?
View 8 Replies View RelatedThe brush tool is no longer working - when I select on any of the brush tools, spray, Art burhs, spray , line, marker etc, they will not work. When I select the drop down nothing is listed. Additionally, none of the other tools in the box, Effect Tool, Image Sprayer too ect, do not work as well. Did I select something to turn off the tool?
I've tried to uninstall and re-install and that did not work.
When I try to draw an ellipse (or circle) and drag it on to my sheet, nothing happens. All of my other shape tools work as they should. What has happened. It worked originally.
View 4 Replies View RelatedLevel Equalization was a tool that I used constantly in PhotoPaint 8. By version 10, it had disappeared for no obvious reason. It was a really vauable tool. Fortunately, I still have PhotoPaint 8 on the system, but it tends to introduce other problems, so I rarely go back to it. It would be handy to have that tool back. X3 has something called Local Equalization and another option called Histogram Equalization, neither of which seems to do anything useful.
In fact, both Histogram Equalization and Local Equalization thoroughly screw up any image that I test on them. I don't have a clue as to why they are even there, since they absolutely don't work, whereas the original Level Equalization worked really well.
When I am using the eraser tool in correldraw x5, I get a crash from time to time.
This crash causes my correldraw to completely shutdown with a message that an unexpected error has occured and that the program had to be closed.
Working with important information, this is a big issue for me.
I work on CorelDraw X5, I have problems while printing an object with interactive transparent effect applied.I've converted the object to bitmap more times to apply different transparent effect in different direction.
Now when I print the file there are errors on the points highlighted by red circles. URL....I don't remember in the past to have had problems with CorelDraw 10 to use this effect.
For years I have used the clone tool happily which has been great for touching up photo's on Photo-paint 12
A few days ago - imported a jpg into Paint as usual, went to use the clone tool and it just doesn't work any more. I can select the icon and the little circles come up but it just doesn't 'clone' anything. Its as if there is mysterious setting that has been turned on that just makes nothing happen.
I have reinstalled the software: no luck - still the same.
I am trying to use the break apart blend tool and every time it says corel has a problem & shuts down my X4?
View 5 Replies View Related