dimension tool.jpg
See the figure below.
Is there any way to adjust the dimensions, when dragged, with regular distance from object?
See differences by red arrows. The intention is that dimensions keep a pre-set regular distance.
I have been using Corel Draw primarily in my work for more than 20 years but have never taken the time to understand this....nor why on some artwork an object will move fractionally but on other artwork (specifically this time, a 20m x 10m workspace for vehicle signage) the objects move 200 or 300mm!?
I always thought this was a 'drawing precision' setting but even when I set that to 1 decimal place it doesn't seem to affect this.
test.jpg
Make a circle. With text tool click on vector and type anything.
How can I increase the default text distance from the edge of an object? I need text a bit away from circle border.
Turn off snap to objects.Now select a dimension tool and draw either a vertical or horizontal dimension line.Now notice the snapping to objects is re-enabled.How can I stop this from happening without having to keep turning of snapping while in dimensioning mode?This looks like a glitch in X4 because I don't see this problem in X5.
View 4 Replies View RelatedIs there anyway to change the Dimension tool pre sets?... i.e. color of line. type of arrow head, etc?
At the moment i have to change them every time i use the tool!
I have been drawing the drafting lines and measurements manually and noticed the dimensions tool. Works great but when I shrink the layout for proofing the measurements change. Is there a setting that I can select that will keep the actual measurements of the drawing no matter how I resize it for proofing?
View 9 Replies View RelatedMy dimension tool seems to do whatever it wants. I will start with certain settings such as U.S. Architectural but then later it will default back to Fractional and any other settings will be changed back. How do I keep it at what I want?
View 7 Replies View RelatedWe like to put our dimension lines in CorelDraw 5 on separate layers from the objects being dimensioned. This way we can turn the dimensions ON/OFF depending on our needs. Unfortunately, we find that the dimensions for these objects do not move with the objects on the other layer. We have also found that certain edit operations seem to break the link between the objects on one layer and their dimensions on another layer.
How we can maintain our dimension lines on one layer, the objects on another, and prevent the problems described above?
X4 user here that upgraded to X6 a few weeks ago. One thing that's blowing my gord is having my dimensions "lock" to guidelines and/or objects -- My dimensions aren't locked in the classic sense, i understand how to lock a dimension in corel. What i mean every time i create a dimension with master guides, and then try to move my guides, my dimension moves with it.
The worst of it is that i'm mostly getting them linked to master guidelines, so when i create a new page, say page 2, and want to move a master guide, i go back to page 1, and it has messed up all my dimensions.
And no, i do not want to break my dimension apart, I need it to stay as a working dimension!
This is probably simple, but I cannot find how do display dimensions on both feet and inches.
Currently my dimensions display as a decimal (ie 12.5' ). I would like both feet and inches (ie 12' 6" )
Where do I change this, turn on option?
why the dimension tool now appears in blue? how to change it back in black?
View 8 Replies View RelatedExperiencing problems with the dimension tool since upgrading to Corel Draw X6 at this end, which hasn't been resolved with the updates.
I work in mm. The system doesn't remember the default settings if I change my preferences for it to measure in mm via the customisation window or the toolbox as it used to in previous versions. When I open the program again or start a new document, the measurement default keeps changing back to ["] (inches). Sometimes, it will jump back to inches after I change the default to mm when I'm working on the same document.
Same problem seems to be happening with the other units of measure available as well.
Current workaround - the only time it seems to remember my settings is if I change the default to mm and then save a document.
I can fwd a video screen capture which shows the problem if that would work.
I don't know if I did something wrong, I click Artistic Media brush and click on the page and I get the message again and again.
The Eraser tool requires that you select an object.
CorelDraw X5 v. 15.2.0.686 Hot Fix 4 - Windows 7-64
not being able to change colors of an object while using the Interactive Fill Tool? That is, change an existing color or add/delect a color to the gradient. I have to delect and reselect the object to change colors. I have to do this each and every time want to make a color change. Without this functionality I am not sure what the point of the tool is.
View 14 Replies View RelatedIs there any way of displaying the geodetic distance(ie "mapdist") with the dimension tool instead of the normal distance?
View 2 Replies View RelatedWhen I hit CTRL+D, CorelDRAW duplicates the currently selected objects.
The first time I do this after installation, CD asks me for a default duplicate distance.
I now want to change this default offset values. How can I do this? I can't find any option to change the default values.
CorelDRAW Graphic Suite X6.4 @ Windows 7/Windows 8 - 64 Bit, Windows Server 2008 R2, Windows Server 2012
Is there a way to adjust the kerning between 2 characters of text? I don't want to adjust the kerning of the entire word, just between 2 letters in the word. The font has too much space between the "V" and "A". I've tried using Paragraph Formatting, but that adjusts the entire word.
View 15 Replies View RelatedIs it possible.
CorelDraw X5 v. 15.2.0.686 Hot Fix 4 - Windows 7-64
I joined to seek out a solution to why my tools under Image or Effects don't bring up a tool dialog, ergo no adjustments can be made with these tools.
My configuration:
Corel Draw Suite 11 Build 11.633
O/S: Windows 7
Other S/W installed: Adobe Photoshop Elements 9
Is there some way to move the corner control points of the perspective effect grid via the arrow keys? I have hand problems and any time I need to move something very precisely I use the arrow keys, or risk hurting my hands. If not, would there be some way to do this with a macro? Also, is there some setting for it – other than having to hold down the shift and control keys while you click and drag, which is just a killer for me – that will arrange it in ways that are only symmetrical (where if you move one side the other side moves equally in the opposite direction)? As far as I can see, rectangular and freehand settings behave the same.
View 3 Replies View RelatedWhen I go to change the thickness of an artistic media stroke, it jumps up from .045 to .095 or down to 0.3, or similar sorts of jumps in either direction, when I want to make finer adjustments than that. I'm surprised that a program that has so many options and precise ways of doing things wouldn't allow that. Is there no way to accomplish that?
View 6 Replies View RelatedHow to adjust the color display on the monitor screen between photoshop and coreldraw to display the same color display
View 14 Replies View RelatedIn my image adjustment dialog (photopaint X5 Brightness/Contrast/Intensity) the image is far too small.
The actual image is about 5.5" x 2.8" and in normal view is fine. when I open the dialog to adjust the whole image is collapsed into a few pixels.
I have shutdown and restarted Photopaint but the problem is still the same.
Adjusted to the active object layer top / below forward / after layer.The active layer is adjusted to page top / below, forward / after layer.
View 4 Replies View RelatedIs it possible to add up/down arrow beside the text boxes (spinner) to adjust the height and width of an object by clicking with a mouse?
I hate pressing F8 at startup!
I have tried to use the Macro recorder to record the keystrokes as I get the dimensions from the top of the rectangle to each line of text & from the edge of the triangle to each line of text. Unfortunately the recorder could not record.
Is it possible to design a macro which can be used to get the dimensions as required ?
have to select an object under an artistic media brush object. i try hold down alt key when select the object under the artistic media object but it select the second object
View 2 Replies View RelatedIs there a way to exclude single attributes from being defined in a object style? As example: i want to define an outline that does not change width of the objects, but everything else.
There is a small tick box right of every attribute with help text "None this object attribute is not defined by a custom style" but i can not mark it. My feeling is, that i need to switch on this tick box to get the result i need, but i can not. When i click on it, it just gives me a greyed out "Revert". When i try to make child styles, there is a way to break the connection to parent style with these tick boxes, but no luck.
Is it a bug? I tried it with X6, X6.1 and X6.2
Dimension Issue while Exporting.png
Why am I not getting Exact and Accurate Dimension while Exporting the file to PSD Format? Do I need to Enable or Disable something?
I create a new black document with rendering resolution set to 150dpi.
If I export the artwork as JPEG, and check "Maintain Size", I'll get the artwork in correct dimension and resolution. However, if I export as TIFF, the resolution by default is 72dpi, and if I increase the resolution to 150dpi, the dimension reduces accordingly, ending up with a smaller bitmap exported.
I am looking for a (preferably free) Auto Dimension Macro for X6.
View 5 Replies View Related
