AutoCAD Map 3D :: Displaying Geodetic Distance With Dimension Tool Instead Of Normal Distance
Mar 17, 2009Is there any way of displaying the geodetic distance(ie "mapdist") with the dimension tool instead of the normal distance?
View 2 RepliesIs there any way of displaying the geodetic distance(ie "mapdist") with the dimension tool instead of the normal distance?
View 2 Repliesdimension tool.jpg
See the figure below.
Is there any way to adjust the dimensions, when dragged, with regular distance from object?
See differences by red arrows. The intention is that dimensions keep a pre-set regular distance.
I am trying to oTrack distance from the top circle edge of a cylinder to a certain distance ... whenever i try to do that ... it either track to x and y .. but not in z :/ ... the video i have on you tube he did it so simply and it seems to be easy .
I am not sure what is wrong .. but i heard parallel and perspective view could make a difference .. i actually try both :/ ...
[URL].....
i have been using the DI command to get line lengths (of road widths, that sort of thing), and in the command line, it just gives the X, Y and Z distances, and not the actual length of the line.
how to change the displayed information so that the length of the line drawn with DI shows in the command line?
Also is there an option to choose what is displayed in the command line with DI command?
I used direct-distance entry to place the dimensions 3/8 away from the object lines... needless to say, while most horizontal dimensions are 3/8 away, the vertical and inclined dimensions are not. see attached. other than creating construction geometry and physically moving the endpoints of the arrows to the correct location, is there any way of getting this precise and correct the first time i do it?
View 1 Replies View Relatedwhat dimension setting controls the distance in which dimension text is offset when it doesn't fit between extension lines.
See attached image for example.
I'm using AUTOCAD 2011 x64 (E.208.0.0)I get the dimension linear tool;I specify the first extension line origin clicking somewhere;I specify the second extension line origin clicking somewhere; (ortho mode on)
Then I pull the mouse pointer to the direction I want the dimension go and I type 1, because I want the dimension lie down at a distance of 1 unit from the draw (a wall for example).
If I check the distance from the draw to the dimension line (not to the text) using de "Inquiry > Distance" tool I do not have that 1 unit I have typed, instead it retrieve a value like 0.9822, and this value varies on a random way, every time its different.
how to edit the line space distance for the dimension text. I can change the style, size and several other features. But the line space distance is the one thing I can't seem to edit. The only solution I know of and use is exploding the dimension and then the text turns to mtext and the option becomes available. But then if the section changes to a shorter/longer area, i have to go through several steps with the exploded lines. how to edit the line space distance for the annotation in the dimensions. i have also attached a pic of my issue as well.
C3D 2014 SP1
DELL Precision T3600
Intel Xeon E5-1650 @ 3.20GHz
NVIDIA QUADRO 4000 Dual Monitor
32 GB RAM / Win7 Pro 64-bit
I would like to draw a smiple line using the transparent command 'AD (angle-distance).
My distance is not horz., so I want to enter the Vertial angle and the slope-distance, in LLD the command was AD VD.
So how do you do this in Civil 3D 2012.
I have a VBA form coded that we use to generate part numbers and descriptions that then populate the iProperties. We often use the part sizes in the description. I would like to be able to put a button on the form that allows users to use the "Measure Distance" tool so that they can measure the part while they are creating the description.
Any code that I could use to activate the "measure" tool while a vba form is active?
How to keep a section view of an iam active when accessing the distance tool? As soon as I click on the distance tool, the half-section disappears. This makes it difficult to measure relationships from one component to another. I am using Inventor 2013 which was recently installed on our workstations.
View 3 Replies View RelatedI would like to measure the distance in assembly.
The distance is between two hole axis.
I use Measure Distance tool.
I do not have the “Select Other” option to choose axis supposedly pop up ofter the preset delay time. Seems like Application Option – General – Selection is responsible for that?
But it is checked to ON as on pic attached. My laptop machine works fine with the same settings.
Im a maya user since 3 or 4 months. Distance between tool for rigging which i cant find in maya 2013.
View 2 Replies View Relatedin 3D - Section Box all measurement tools are grey indication of no use/doesn't applay/stay away/? Using 3D-SB you can have a glance insidea 3D modell and there be objects that only have a elevaton and no other properties except New Constuction (Specialty Equipment). So confirming space is a pain.
View 6 Replies View Relatedis there a tool or plugin for Paint.NET that can show the distance between points that i click on?
View 3 Replies View RelatedI have one problem in ilogic "How to convert the normal dimension to driven dimension through ilogic"
View 4 Replies View RelatedI am trying to get the distance of multiple block insertions that fall along a polyline to the startpoint/endpoint of said polyline.I can do this pretty easily using straight line (as the crow flies) distances between the block insertion and the polyline startpoint/endpoint, but I need the code to actually follow the polyline whenever it changes angle.
Is this possible using .NET? How to start it?Below is my code to to get the straight line distance between the polyline startpoint and block insertion point:
Dim dist As Double = Math.Sqrt((acPline.StartPoint.X - acBref.Position.X) * (acPline.StartPoint.X - acBref.Position.X) + (acPline.StartPoint.Y - acBref.Position.Y) * (acPline.StartPoint.Y - acBref.Position.Y))
I have to break a line/polyline with a known distance around a point of the line. I was thinking of creating a circle with a specific radius and then trim the line inside the circle, then delete the circle but I could not find how to use trim in .net.
View 1 Replies View RelatedIs there a way of dimensioning the distance between the views on a .idw?
I have a series of drawings to make, that consist of two view each. I need to make them as consistant as possible, as far as the distance from view to view, accross the drawings.
What formula or dimensions do i require so as there is a 0.5mm gap around the Revolution 3 (red color)...is revolution the method required to achieve this?
View 2 Replies View RelatedIt's the strangest thing. I'll draw a 6' long line, go to measure it and it comes up as 5-'6-1/2".
Units are set to architectural at 1/16" precision
Measureinit is set at 0
The drawing is copied from another file which I did not create.
I see that there is an Inquiry tool for Minimum distance between two lines but I can't find anything about the maximum distance.
View 7 Replies View RelatedI am editing this block of seating:
Seats.jpg
and I was just wondering if there was a way of reducing the distance between the squares in one go instead of doing it individually?
I am looking for an explanation on CHAMFEREDGE Distance1 and Distance 2 Setting with respect to UCS or VIEW. I usually do it by trial and error but an explanation as to where Distance 1 and 2 are applied will be great.
View 3 Replies View RelatedHow to get a point in the polyline with a set distance and obeying my current ucs. A projection of the point as an orthogonal snap.
I wrote a code creating a polyline between the lowest and the highest initial polyline and obtaining the intersection. But when it comes to many points the rendering is quite time consuming.
Here goes= If i have a rectangle that is 27.125 X 27.5 and i want to chamfer a corner, but i also have a set distance(or the hypotenuse) Which is 22. How can i get it to put that angle in there with out trial & error of drawing a 22" long line on a 45 degree angle and moving it till it fits properly, then trimming off the corners... I have tried all the different commands in chamfer, the best i can do is guess at the distance,which is a crap shoot to me.
View 9 Replies View RelatedUsing Autocad 2000LT, Windows XP
1) One circle is inside the other circle, need to measure distance from the outside edge of one circle to the to the outside edge of the larger circle?
2) One circle inside the other circle, need to measure from the center of the larger circle to the nearest outside edge of the smaller circle?
3) Circles are near each other and need to measure from the outside edge of one circle to the outside edge of the other circle?
Is there a way in AutoCAD 2012 to set a distance between a line and the text above it? How to be able to mark all my bearings and set a distance so all of them ends up with the same distance from the line they refer to.
View 9 Replies View Relatedi have two circles apart 1000mm now i need to adjust the distance to 700mm what should i do without deleting any object?
View 9 Replies View Relatedwhat the minimum distance between two 3D rectangles is. I can do trial and error using the INTERFERE command (Acad 2012) and move the 2 groups until they stop hitting each other, but I wanted to see if there is a command in ACAD that will tell me how close 2 objects pass.
I have an old pile foundation group for 4 tower legs and I wanted to see how close I could get the new pile group to the old group. I'll try to attach a dwg file with 3 options I was trying. The old group is in Cyan and the new group is Red.
I'm guessing I could use UCS and set it on one of the piles and measure to the closest old pile, but the screen gets so cluttered. Is there a way to only show a slice through the objects?
arch.jpg
I would like to know if it's possible to create an offset curve from another curve, but with an increasing distance, the result i want to achieve is shown in the picture. (the magenta line).