AutoCAD Civil 3D :: Max Distance Between 2 Lines?
Dec 18, 2013I see that there is an Inquiry tool for Minimum distance between two lines but I can't find anything about the maximum distance.
View 7 Replies
ADVERTISEMENT
AutoCAD 2013 :: Maximum Distance Between 2 Lines
Dec 18, 2013I see that there is an Inquiry tool for minimum distance between two lines but I can't find anything about the maximum distance.
View 6 Replies View RelatedAutoCad :: Finding Distance Between Offset Lines
Jul 6, 2011how would I find the distance between two offset lines. Basicaly what I have got is straight line with an original offset line at the base and I have copied this line at different distances along the line, but I need a way to double check the distances from the original line.
View 4 Replies View RelatedAutoCAD Civil 3D :: Angle-distance With Vertical Angle And Distance
Nov 19, 2012I would like to draw a smiple line using the transparent command 'AD (angle-distance).
My distance is not horz., so I want to enter the Vertial angle and the slope-distance, in LLD the command was AD VD.
So how do you do this in Civil 3D 2012.
AutoCAD 2013 :: Drawing Lines By Bearing And Distance
Jun 4, 2013I keep trying to draw a line by bearing and distance using the format @50.00'<N80d04'30''E. Everything enters but when I enter the last command of the bearing and hit enter it stays in the red boxed outline and does nothing. Upgraded to 2014 and trying to get things set for drawing property boundaries. Tried setting the units to surveyors mode and such but nothing works.
View 2 Replies View RelatedAutoCad 2D :: Lines Snap At Offset Distance (0.0000274 M) From Actual Point?
Aug 22, 2011Lines snap at an offset distance (0.0000274 m e.g.) from the actual point. What change of settings can resolve it?
View 2 Replies View RelatedGIMP :: Horizontal Lines Exactly Same Distance Apart?
Jun 8, 2013I want to make a height comparison chart of me vs some dragons from an Android Game... I know my height and I know the dragons' height but first I need horizontal lines across the canvas exactly the same distance apart before I can input numbers in...What is the best way to accomplish this?
View 2 Replies View RelatedPhotoshop :: How To Change Distance Between Grid Lines
Jul 9, 2012I know the grid creation by View->Show->Grid, but I cannot find how to change the distance between grid lines. I need it since they are too close, I can hardly see the picture.
View 4 Replies View RelatedGIMP :: Draw Parallel Lines With Specific Distance
Nov 1, 2012How do you draw parallel lines with a specific distance between them? I was gonna use this function for futuristic artwork. Do you have to use the grid for this or is there another way?
PS. is there a plugin maybe?
AutoCAD Map 3D :: Displaying Geodetic Distance With Dimension Tool Instead Of Normal Distance
Mar 17, 2009Is there any way of displaying the geodetic distance(ie "mapdist") with the dimension tool instead of the normal distance?
View 2 Replies View RelatedAutoCAD 2013 :: OTrack Distance From Top Circle Edge Of Cylinder To Certain Distance
Jul 30, 2012I am trying to oTrack distance from the top circle edge of a cylinder to a certain distance ... whenever i try to do that ... it either track to x and y .. but not in z :/ ... the video i have on you tube he did it so simply and it seems to be easy .
I am not sure what is wrong .. but i heard parallel and perspective view could make a difference .. i actually try both :/ ...
[URL].....
AutoCAD Civil 3D :: Mid-Ordinate Distance With Breaklines?
Oct 19, 2007Where can I set the default for my mid-ordinate distance when adding breaklines to a surface. Would like to change it from 1.0 to 0.1.
View 6 Replies View RelatedAutoCAD Civil 3D :: Z Distance In Inches Not Feet
Dec 11, 2012I have a very simple surface. All of the elevations defining it, are set in feet. When I click on the surface it tells me my max and min elevations are in feet matching the points that I have defining the surface.
Here is the kicker, when I run a distance it is measuring the Z distance in inches and not feet. As you can see by the attached image the distance is 95' but the elevation change is 1 3/8". The actual points defining the surface are 1.28' difference. If I were to do a spot elevation on the surface, it would give me the correct elevation in feet. I am guessing that this is some sort of variable that I have missed, but damned if I can find it.
AutoCAD Civil 3D :: Point Gap Distance From Marker
Apr 25, 2013I read all of the posts I could on point gaps and know how to make the leader reach for the center of the point. What I want is for the leader to actually attach to the block of the style I have created. Is this possible, or do I need to find a new way to label of these points so that the leader touches the block. Also I noticed the gap is not consistent from point to point.
I am using civil 3d 2011 with the latest service pack.
Civil 3D 2013
HP Z400 Workstation
6GB of RAM
296GB HDD
ATI FirePro V5700(FireGL)
Win 7 Home Professional
AutoCAD Civil 3D :: Bearing And Distance Label
May 4, 2013I am wondering if there is a way to get the bearing label to look show a 09d02'01" the way i have is set up it cuts off the 0 infront of them? I thought that would be fine however my boss does not, so I have o explode the label and add it in then. I do not like to do this however.
View 4 Replies View RelatedAutoCAD Civil 3D :: Station Label Offset And Distance
Nov 5, 2012New to civil 3d...I have a series of bore locations along an alignment that I need the station offset and distance. I tried POINT -> ALIGNMENT: STATION/OFFSET, and that prompts me to tell where i want the offsets to go. I want to be able to pick the center of each bore and have civil 3d tell me that information. What command do I use?
View 4 Replies View RelatedAutoCAD Civil 3D :: Create Points By Slope Distance?
Oct 8, 2013I have a line at a constant grade. I need to create points along this line. The information given is in slope distance and these vary at times.
I've tried the point create methods and they all seem to calculate points at a horizontal distance. How do you enter the slope distance?
I know I can go back to basic Acad methods of divide, changing ucs so horizontal works etc.
wondering if it can be done in the create points commands?
AutoCAD Civil 3D :: Distance Displays In Inches Want Feet?
Apr 24, 2012When I use the distance command the answer displays in inches; I prefer feet of course. How do I navigate to the menu that changes this?
View 4 Replies View RelatedAutoCAD Civil 3D :: Distance Label From Surface To Point
May 28, 2013I was asked to lable survey data with the (2D) distance between the design surface and the survey points of the finished ground.
View 9 Replies View RelatedAutoCAD Civil 3D :: Distance Between Existing And Design Alignment In CSS
Oct 30, 2012A trick to make automatic a dimension line for the distance between the existing alignment of a road and the design alignment.
This dimension line I want to be in the cross sections. I make a project with a widening road and I have to show the difference between the old and the new alignment.
AutoCAD Civil 3D :: How To Get Overall Span Distance To Report Correctly
Apr 28, 2010I have no problems labeling parcel lines but am having issue with overall spanning labels. For example, the crows feet are showing at the beginning and end of a subdivision property line but the distance is incorrect. I found that that distance shown correlates back to the parcel segment picked not the overall subdivision property line. How to get the overall span distance to report correctly?
View 9 Replies View RelatedAutoCAD Civil 3D :: Capture Drag Distance Of A Label?
Dec 13, 2012Any way to capture the drag distance of a Civil 3D label object?
If that was a property, then we would be able to make our Leaders display or not display based on the distance from the object. If I only drag a label a half-inch I might not want a leader, but if I go further I would like the leader to appear.
It would be easy enough to do this with expressions if you could make that property available in the expressions dialog.
AutoCAD Civil 3D :: Grade To Surface At A Fixed Distance?
Aug 9, 2013When we created our fist C3D template in 2007 it was possible to make a grading criteria that targeted a surface at a fixed distance. In other words, the slope was variable. Looking at it again in 2013 it appears it's not possible to creat a criteria like that. Am I missing something? Or was that option removed? .....perhaps because it was too unstable?
View 9 Replies View RelatedAutoCAD Civil 3D :: Label Bearing And Distance Between 2 Points?
Mar 19, 2010In LDD I could label a bearing and distance between 2 points. (Points - not actual surveyed points, but 2 spots I click)
In 3d 2010 I only can label a whole line, not only a portion that I choose. This has to be a label option still.
AutoCAD Civil 3D :: How To Create Transition Crossfall Over A Distance In Assembly
May 4, 2012How to create a transition crossfall over a distance in assembly. For example, I would like to get hard shoulder crossfall along the edge of travel lane from proposed 2.5% to tie in the existing (e.g. 1%) over 10m.
View 2 Replies View RelatedAutoCAD Civil 3D :: Multileader Landing Distance Changes To Apparent Random Value (-8 / ±)
Nov 9, 2011I'm having a frequent but random problem with Multileaders where the landing distance will change on its own from its initial standard 1/8 inch to some relatively large negative distance which also causes the landing to disappear altogether. If I use the move trick for resetting all elevations to zero (Move 0,0,10e99 then 0,0,10e-99) the landing will reappear connecting the landing grip at the strange negative offset.
The problem seems only to happen when the leader is connected to the bottom right of the note.
When I remove the leader and add a new leader it appears correct but as soon as I save the drawing the affected Multileaders will again present this problem.
Windows 7 Professional 64-bit - Service Pack 1
Intel﴾R﴿ Core﴾TM﴿ i7-3820 CPU 3.60GHz; 16 GB DDR3 Dual Channel RAM
nVidia Quadro 4000; AutoCAD Civil 3D 2013, sp1
AutoCAD Civil 3D :: How To Change The Precision For The Bearing And Distance Labels
May 10, 2012How do you change the precision for the bearing and distance labels in 2012
View 2 Replies View RelatedAutoCAD Civil 3D :: Geographic Location - Zooms All The Way Out To Undesired Distance
Jul 8, 2013I am having trouble with the geo marker and the geographic settings. the file given to us has a pre defined grographic location, (which is incorrect) which is making the file zoom out a lot further than desired. I change the geographic location and the position of the geo-marker, but when I use zoom extends, it still zooms all the way out to the undesired distance. There is no "space junk" out that far, so I do not know what else it can be.
View 4 Replies View RelatedAutoCAD Civil 3D :: Creating Bearing / Distance Table Using Points?
Feb 25, 2013I am using Civil 3D 2012. I know how to label a line with bearing and distance. What I would like to do is make a table with these bearings and distances referencing the point numbers. For instance, I have a new ROW line that starts at point 1000 and changes direction at point 1001 and changes direction at 1002 and so on. I need a table that shows Points 1000-1001 is ___ Bearing and ___ Distance.
The lines are not parcel lines; they are only line segments.
AutoCAD Civil 3D :: Divide Ellipse Into Line Segments Of Required Mid-ordinate Distance
Feb 20, 2013How to divide ellipse into line segments(equal/unequal lengths) of required accuracy or tolerance ?
tolerance = mid-ordinate distance
Civil 3D 2012, SAC
16 GB Ram 64 Bit Win7
AutoCAD Civil 3D :: Offset Which Controls Distance Between Profile Grid And Data Band
Oct 12, 2006Where the heck do I find the offset which controls the distance between the profile grid and my profile data band?
I have compared settings between ones that look the way I want and I'm just not seeing it.
(The attached doc shows you what I'm up to)