I have no problems labeling parcel lines but am having issue with overall spanning labels. For example, the crows feet are showing at the beginning and end of a subdivision property line but the distance is incorrect. I found that that distance shown correlates back to the parcel segment picked not the overall subdivision property line. How to get the overall span distance to report correctly?
View 9 RepliesIn trying to learn more about label styles, the C3D Help instructs one to:
2. On the Layout tab of the Label Style Composer, select or create the label component that you want to span multiple segments.
3. In the Properties list, under General, change the Span Outside Segments property to True.Specify this setting for each component that you want to span multiple segments.
There is no "Span Outside Segments" to set to True in my Label Style Composer. The only T/F option under General is for visibility.
Civil 3D 2013 SP 1, 64 bit
Dell Precision T5600, 16 GB
Win 7 Professional 64 bit
Intel Xeon @ 2.0 GHz
NVIDIA Quadro 4000
Mastering C3D - the bit about spanning segments on an exterior line crossing several parcels. It works like the book shows except the crow's feet only appear at the start and end of the parcel's segment that I click on to insert the label, instead of the start and end of the whole segment. The distance the label reports is correct.
The crows feet are blocks inserted at the start and end of the direction arrow component (visibility false) in the author's style? I have turned the arrow's visibility on and can see that the arrow does not span the parcels.
I have another drawing in a later chapter on alignments that has the same spanning label style that works and I can't for the life of me discover the difference between the two.
Civil 3D 2013 SP 1, 64 bit
Dell Precision T5600, 16 GB
Win 7 Professional 64 bit
Intel Xeon @ 2.0 GHz
NVIDIA Quadro 4000
i am trying to do the plan production stuff, any way to span the profile across the entire viewport. I don't want it centered in the middle of the viewport, i want it to take up the entire viewport and just create the profile with enough height and length to keep my required scale.
View 2 Replies View RelatedHow to represent a bottomless arch (arch span)? I can make a horizontal arch pipe, but I only need the top half. I also thought about building a corridor.
We do have a storm drain system running perpendicular above it and need to show the arch as a crossing. Corridor would work but I think I would prefer a pipe network-type solution.
I would like to draw a smiple line using the transparent command 'AD (angle-distance).
My distance is not horz., so I want to enter the Vertial angle and the slope-distance, in LLD the command was AD VD.
So how do you do this in Civil 3D 2012.
I'm need to make a Map Check report on C3D2011, but I don't know how to do it. Since C3D everything have to be setup before it can be use, so my questions are: How do I setup map check? Or What do I need to do get map check report?
What are the steps to do it right?
I would ask a question about the Cut and Fill Volumes reports in Civil 3D.
View 3 Replies View RelatedI import a survey data (X,Y,Z) in civil3D and make an horizontal alignment near them. I want reference theses survey points to my new alignment by a .txt report (#pts CH. OS elevation). Is it possible?
View 3 Replies View RelatedSetting up my first press parts list and already I'm regretting it...
How do we report material? Lower case letters spelling ductile iron is not acceptable in this office. How to I edit this to be 'DI' or anything else? I have looked in the press part catalog editor or whatever it's called and did not see a way to add to the list of all lower case materials.
Do I have to rely sole on part description for material in labels? ....and why do they still think that no one needs to use the " symbol with these parts? Freakin crashing all morning tring to get this going...
IDSP 2014
Win 7 64, Xeon ES165@3.2Ghz,
64 GB RAM, Quadro K4000 (x2)
I copied the General Legal Description report and renamed it. When I ran the report, it asked me to save the file Civil.html before opening it. If I run the OOTB report it does not ask me to save the page before opening it. Is this something that I can fix? I have not found a setting anywhere that changes this.
View 1 Replies View RelatedI'm missing the tab in my tool space that has the report generator in it. What command brings that tab back?
View 2 Replies View RelatedI would like to re-format the way volume reports are displayed, for example I don't need the cut area or reusable volume columns or I'd like to change the Cu.m. dimensional to something like m3.
View 5 Replies View RelatedIs there a way to included the radial bearings of curves for alignment reports generated for the report manager? I know the curves are tangent because I made them so, but the guy checking my report for errors doesn't know that. I don't know any xml.
View 1 Replies View RelatedCivil 3D 2013.
First prize for me would be to be able to access Parcel boundary vertices via managed dot net.
I could not find the boundary property of the Parcel object.
It looks like developers can access Parcel vertices via COM, in the Loops property of Parcels.
So, it is possible to combine the two to get what I need.
Then I turned to the Report facility. The METESBOUND XSL iterates Parcel segments but provides the distance and bearing instead of the vertices. I was hoping to get to the bottom of the linked code to edit it and produce the vertices output. But - I failed again. Cannot see how the XSL files get to the data needed.
Is there maybe a book or comprehensive reference on the XSL files that provide the reporting function?
how can i create custom report ?
View 7 Replies View Relatedwhy the "cut/fill" numbers are all at zero in my report? All the offsets and the design elevations show just fine....
View 9 Replies View RelatedIs it possible to create a Slope Stake Report for multiple baselines?. When I generate the report, it only creates a report for the first baseline of the corridor. All of my sample lines are in the same section group, so I'm wondering why it would not create all my sampled stations.
View 7 Replies View Relatedhow to get the Horizontal Curve Report saying left / right curve details in autocad civil 3d
View 2 Replies View Relatedhow to get Super Elevation report for superelevation value at every point separated
View 2 Replies View RelatedI need to include the data definition for 120 elements . I'll insert it at a word report.
Civil 3D (2013)
When creating a Corridor Section Points Report using the Toolspace>Toolbox>Reports Manager in Civil 3D 2012, the stations get listed but only a few contain point information (see attached).
I am trying to generate stake-out data for a proposed road. I was able to get this report to work successfully in one of the Civil 3D tutorials, so I assume that nothing is wrong with the utility. The problem may be related to my corridor.
I am trying to export an Alignment PI Station Report. I've set all the settings I can find to round coordinates to 4 decimal places, Distance to 2 decimal places, and Direction to the nearest second (DMS). When I execute the PI Station Report, the Distance is 3 decimal places and the Direction is to the nearest 100th of a second. how to get these to the correct decimal place? I managed to change them to the correct decimal place for a Station & Curve Report, but not for the PI Station Report. Also, for the Northing/Easting coordinates, I want to remove the commas (for example, a Northing of 3,058,715.3774' should read 3058715.3774').
View 4 Replies View RelatedI want to generate Civil 3D point of intersection alignment report including following columes.
PI Row station
Delta Angle
PI Includead Angle
Is this possible?
AutoCAD Civil 3D 2012 SP 2
My parcel inverse reports from the Toolbox Report Manager are still coming in with the bearings having decimal seconds to 3 places (N 0-00-00.000 E). I have already changed the variable for angle precision to zero in the "General_Formating_JScript" xsl file but it's still not coming out correctly. Is there any other file that holds an additional angle or bearing precision setting?
View 4 Replies View RelatedI am attempting to customize a Pipes and Structures report but am having difficulty changing the % slope column to run over rise.
View 2 Replies View Relatedi am trying to do a print out of our lots within our proposed plat & need to do indivial closure reports for each lot. when i try an run a report i get Error - Invalid execute file.ive added new .dll files that I got off the net but they do not work either. which are located at C3D 2011/enu/Data/Reports/Net.
View 2 Replies View RelatedI am trying to duplicate a feature line report I did a while ago. It has offsets,elevations,eastings and northings. What I would like is the offsets shown. I am in toolbox, reports manager, corridor, Feature Line Reports. When I create a report I get the list of feature lines which shows point codes which are back_curb,etw,...etc. When I create the file, all I get are the point code such as Back_Curb Left which shows the station, easting, northing and elevation. How do I get those offsets?
View 2 Replies View RelatedI am trying to find where the formatting is for the General Legal Description bearings. I am currently getting an output of NORTH 00° 12' 33" EAST, but would like to eliminate the spaces in the DMS: NORTH 00°12'33" EAST. This is also the case with the delta angle for curves. When I run the Metes and Bounds report, the bearings appear without the spaces. I think that I have changed it before, but I have switched employers since editing the files.
View 2 Replies View RelatedHow to get the Horizontal Curve Report saying left / right curve details in autocad civil 3d.
View 1 Replies View RelatedI have a problem with the corridor section points report on Civil 3d 2014. It only presents the first station on the corridor.
Attached image.