AutoCAD Civil 3D :: Customizing Pipes And Structures Report
May 24, 2012I am attempting to customize a Pipes and Structures report but am having difficulty changing the % slope column to run over rise.
View 2 Replies
ADVERTISEMENT
AutoCAD Civil 3D :: Can't Label Certain Pipes / Structures
Mar 7, 2012why I can't label certain pipes/structures? I can select the pipe or structure, rt click, add label and I get nothing. The layer is on cause I can see other labels. I also get the same result when I go to annotation, pipe label. This only happenes to certain pipes or structure, others in the same network label fine.
View 9 Replies View RelatedAutoCAD Civil 3D :: Pipes And Structures - Max HGL Exceeding Elev Of Rim
Aug 22, 2012In a run of pipes and structures, I have 3 structures that overflow. 2 of the structures max hgl els are even with the rim elevation (as is in the case of other runs in the same project), and 1 structure has the max hgl exceeding the elev of the rim. Why this one and not the others?
View 2 Replies View RelatedAutoCAD Civil 3D :: Converting Pipes And Structures Catalogs?
Oct 11, 2013I'm trying draw profile, I see "compile error can't find project or library",
then I select "convert VBA pipe and structure rules to .NET" it works until I turn off civil 3d
how to do, that it works for everytimes?
AutoCAD Civil 3D :: Create A Table That Will Incorporate Info From Structures And Pipes
Aug 19, 2011I am trying to create a table that will incorporate info from structures and pipes. In C3d 2010 I want to make a CB chart which will show the pipe size, starting structure and invert. I would also like to include the CB rim elevation but that would be under the structure table. Is there any way I can combine the RIm elevation with the pipe table?
View 4 Replies View RelatedAutoCAD Civil 3D :: Pipe Network Total Volume Of Pipes And Structures
Nov 19, 2013I oftenly do conception for parkings and always need to have the calculated rentention of water volume in the pipe network.is there a way to have that information with Civil 3d ?
Googled the subject and i only found a topic on trench's for the pipes ...
Cyberflow
Using : Autodesk Civil 3D 2012
OS : Windows 7 - 64 bit pro
AutoCAD Civil 3D :: Labeling Multiple Structures / Pipes In Profile View
Apr 20, 2011Is there a way to label multiple structures/pipes at one time in profile view? We have tried selecting all at one time, right click and add label, but it only labels one of the structures/pipes.
View 4 Replies View RelatedAutoCAD Civil 3D :: Default Pipe Network Layer (Not The Structures Or Pipes The Network)
Dec 7, 2012I am using Civil 3D 2013. I work in an office where we have a few different flavors of Autocad (LT, MEP, regular vanilla AutoCAD etc...) and versions (2010 LT, 2011, 2012, 2013).
For the most part there isn't much inter-office drawing coordinate that has to happen, but there is the occasional project where multiple disciplines (Structural, Mechanical and Civil Site) have to share drawings.
The specific problem I am having is when I share my 2013 Civil 3D drawing with a user using 2011 MEP. He gets the typical rectangle for the proxy objects (in my case, my pipe networks for sanitary and storm drain). We've tried downloading and installing various object enablers, but there doesn't seem to be one for a 2013 to 2011 scenario. So I setup my parts to be on layers that he can just turn off. HOWEVER... the actual pipe network (not the structures, parts, labels etc... the network itself) ends up on layer 0. For this specific project, I do the old (ssget "x" '((8 . "0")) search to select all objects on layer 0, add those objects to a selection set (pselect), then in my modify objects dialog I filter for pipe networks, then change the layer to something other then 0.
While this is a workaround that works for me, what I really want to know is if there is a way that I can change the default layer that the network (again, not pipes, structures or text, the actual network) so I don't have to use the workaround. Any thoughts?
P.S. It's killing me that I had to create a new Autodesk login and now all my AutoCAD "street cred" is lost
"The source of expertise is not in the memorization of the minute details of a subject but in the thorough understanding of the fundamental concepts on which it is based."
AutoCAD Civil 3D :: Labeling A Pipe Between Structures
Sep 26, 2013Any way to label a pipe part way between structures? I would like to be able to label a sanitary line where a service ties in with the main line invert.
C3D 2013
AutoCAD Civil 3D :: Structures Rotated In Section?
Jul 17, 2013I've placed generic Junction box structures right out of the box from C3D and when I cut a section, the section shows the wrong side of the structure. (Rotated) i.e. An inserted 60”x36” junction box inserted as a curb inlet and then rotated into position will display the 60” side even though it’s perpendicular to the section line.
I've had to go back and place a 36”x60” to get it to display the 36” side in section? Why is there a “rotation handle” on the structure if you can’t really rotate it?I really don't want to swap all 60"x36" with 36"x60" structures just so they will display properly in section.
AutoCAD Civil 3D :: Create CSV File For All Structures
May 21, 2013I'm currently working on a very large Dwg, with multiple pipe networks both sanitary, Storm and pressure pipe.
I need to create a .csv file for all my structures for Stakeout. I know I can go into my toolbox and create a report through the reports manager. The problem is that its giving me too much information, all I want is PNEZD. How can I create this report or edit that report being generated?
AutoCAD Civil 3D :: Labeling Structures In A Network?
Sep 26, 2013I am labeling structures in a network on the profile view. I cannot get the leader when i drag the label to anchor to the top of the structure? Is there a way to do this, i figured out how to have the label insert at the middle of the top line of the structure.
Civil 2014-Infrastructure Design Suite
Windows 7 Professional-SP 1-64 bit system
Intel Core i5-2500K cpu @ 3.3ghz
NVIDIA GeForce GT 430
8.0 gb ram
AutoCAD Civil 3D :: Structures Disappear During Synchronizing?
Nov 21, 2012Seems to happen randomply, but my structures and labels disappear when synchronizing.
View 7 Replies View RelatedAutoCAD Civil 3D :: Structures Import As Null
Jun 25, 2013I have set the migration defaults to my part list and the pipes come in as expected but all the structures come in as null? I even went as far as setting every option to my rect junction NF and they still come in as null?
View 2 Replies View RelatedAutoCAD Civil 3D :: Cannot Extend Structures In Profile
Jul 18, 2013I have added a pipe network to my profile view and for some reason the structures do not extend down to the inverts of the pipe. So the pipes are lower than the structures. I tried changing the sump, and the rim to sump (rim to sump can be editted but immediately goes back to what it originally was when you click apply. I've also tried clicking the structure and extending it downwards but it doesn't change. I've tried changing the stye and still have the same issue.
View 4 Replies View RelatedAutoCAD Civil 3D :: Cannot Draw A Pipe Only Structures
Nov 23, 2012in situation i can draw only a structure only. When i want to draw a pipe-there nothing happens. Is possibly that i erase something in Part builder command?
View 2 Replies View RelatedAutoCAD Civil 3D :: Structures Not Plotting With Publish
Aug 26, 2010My storm drain profiles will not plot the structures if I publish. They plot ok if I use the plot command, but I'd like to be able to publish.
View 4 Replies View RelatedAutoCAD Civil 3D :: Identify What Labels Structures Use?
May 9, 2012Any way to easily identify what labels structures use? I have a plan and profile drawing drawing with 15 diferent layouts. Another guy worked on it and edited the contents on one of the profile structure labels. So now I'm going to have to go through each layout and looking for what structure labels would have been changed. Typicaly if there is a slight difference in the callout for one structure I'll just edit the label text for that one particular structure.
I would like to select (sweep) all the structures in profile and see which ones would have used this particular label style.
AutoCAD Civil 3D :: Customizing Road Profile Output
Feb 27, 2013I am new to Civil 3D and need to customise the look of road profiles so they look like they were produced from any of our other civil design software packages that we use (to maintain standards between offices etc).
The attached picture is what I need them to look like. I want to show both the natural ground (the dotted line) and the design road line (solid). Then I want to write on the profile the station, natural level and the design level.
I've got the Mastering Civil 3D book (and a few others) sitting on my desk.I worked out how to turn off the grid on the default profile althoguh that was about it.
AutoCAD Civil 3D :: Deflection Angle Label For Structures
Nov 12, 2010Is there a way to show the deflection angle between incoming and outgoing pipes in a structure label? Or any label at all, for that matter? I know it can be done with alignments at the PI point, but only in the source drawing.
View 1 Replies View RelatedAutoCAD Civil 3D :: How To Change The Sump Default Value For Structures
Feb 10, 2012I can change it under structure properties, but I can't find where to change it before I make the pipe network , 2013 Civil 3D.
View 2 Replies View RelatedAutoCAD Civil 3D :: Leader Attachment Options For Structures
May 8, 2012I would like the Leader Attachment for a structure in dragged state to be at the bottom of the top line. I have underlined the top line and would like the leader to extend from the underline.
Is there a way to add a "bottom of the top line" to the pull down menu, or control the leader attachment point in another way?
AutoCAD Civil 3D :: Set Pipe Structures And Assign Own Rim Elevation?
Oct 21, 2013Can you set pipe structures and assign your own rim elevation? I don't want to use surface elevation.
View 1 Replies View RelatedAutoCAD Civil 3D :: Associate Multiple Structures To One Alignment
May 22, 2012Is there any way to associate multiple pipe structures to one alignment. I spend half my time re-associating structures to alignments.
View 1 Replies View RelatedAutoCAD Civil 3D :: Customizing Reports - South Azimuth Direction?
Jun 3, 2013is there maybe an error in the XSL?
Here is my alignment, correctly labelled in South Azimuth:
Before customising, the Alignment_Curve report gives me this:
AutoCAD Civil 3D :: Creating Points From Pipe Network Structures?
Jul 31, 2012is there a quick way to create & export points from a pipe network? i've probably got 100 or so structures that need points with the correct structure name in the point description.
Dell Studio XPS 9100
Intel Core i7 CPU 930 @ 2.8GHz
12GB Ram
64 bit
C3D 2012 SP3.0
AutoCAD Civil 3D :: Storm Sewers Migrating Null Structures?
Jun 25, 2013I have set the migration defaults to my part list and the pipes come in as expected but all the structures come in as null? I even went as far as setting every option to my rect junction NF and they still come in as null? What did I miss?
Civil 3D 2012 & 2013
HP Z210 Workstation
Intel Xeon CPU E31240 @ 3.30 Hz
12 GB Ram
64 Bit Win7 OS
AutoCAD Civil 3D :: Import STM Change Sump Level Of Structures
Oct 4, 2013I am struggling to import .stm file into a blank civil3d file. it does import whith correct sizes and elevation. the issue is rim level of structures are the same as SSA file but it will make 2 meter sump depth to stuctures, thus structures invert levels are not correct. i just made a sump depth rule for structure and applied to some of them. it will correct it but as i have more than 1000 manholes in network it will be a major job to apply the rule. i know "apply rule" command will work a lot but i would like to know why it is importing whit wrong properties?
View 3 Replies View RelatedAutoCAD Civil 3D :: Pipe Between Structures Only Has Location / Diameter Snaps?
Jun 14, 2013So I have a proposed storm sewer pipe network and 90% of pipes snap to the structures fine, with a start/lengthen snap on one end and an end/lengthen on the other, and a location/pipe diameter one in the middle. When I go to draw one of the pipes though, I draw structure to structure and it doesn't sit properly. I click on it to make sure it snapped to the structure but there is no start, end, or lengthen snaps on either end of the pipe. Only a Location/Pipe Diameter one in the middle. Therefore, I cannot manipulate it's length or where it connects, I can only move it around from the center.
View 5 Replies View RelatedAutoCAD Civil 3D :: Pipe Structures On Non-plotting Layer Still Plot
Feb 21, 2012When I'm drawing in pipe networks I like to use a user created block for structures. I do this by manually inserting the block I need (DI, MH, etc.) at each structure location. Since there are different blocks for different structures, having the structure itself display as a user block via the structure style isn't really an option since it will display the same block for all structures unless you make a style for each type of structure. So I like to have my structures set to display on a non-plotting layer via the style display layers. This way I can still select and modify its properties, but it won't show up on a plot.
My question is: If the style display layer is a non-plotting layer, why is the "object layer" (0 layer in the case) overwriting the display layer and causing the structure outline to plot?
If I put the display layers of the pipes onto a non-plotting layer, they will not plot even if the object layer is a plotting layer. The workaround so far is to select all the structures and set their object layer to a non-plotting layer, but this is not ideal.
AutoCAD Civil 3D :: Customizing Viewport Reference System Text Format
Sep 12, 2012I'm adding a reference system grid to my paper space viewport. The default text format for the military grid reference system is almost perfect, except for the figures that are superscripted (see attached figure) - which I would prefer are aligned on the same baseline as the larger text, but still at the smaller size. Is there a way to customise the text format so that the reference system remains dynamic, but I get the exact format I want?
View 2 Replies View Related