I would like the Leader Attachment for a structure in dragged state to be at the bottom of the top line. I have underlined the top line and would like the leader to extend from the underline.
Is there a way to add a "bottom of the top line" to the pull down menu, or control the leader attachment point in another way?
Please see attachment. There are two structure label styles in the attachment. The one on the bottom has the leader attached to the edge of the structure and the one on the top has the leader attached to the centre of the structure. How do I change the attachment point for the top label so the leader attaches to the edge of the structure as the bottom label does? Can't seem to find the parameter to change??
View 3 Replies View RelatedI would like the arrowhead for the leader labaling my structure in a pipe network to attach to the outside edge of the structure. Right now it attaches to the middle of the structure and is covered by the block representing my structure.
View 9 Replies View RelatedWhere do you find the Leader Attachment Option in the Marker Style. I've looked but don't see it.
Civil 3D 2011
Ok, I'm sure there is a very simple way to fix this that I just haven't yet discovered. When I insert a stacked dimension in the top line of my leader text, the spacing gets automatically adjusted for the hight of the stacked dimension and it adjusts the leader line up so that it actually passes through my top line. Can this be avoided? I have attached a picture for reference.
View 4 Replies View RelatedJust a quick (but possibly hard?) question. I have a multileader set up, but I also want it to automatically include a line which spans the vertical breadth of the text at the end of the landing. It's hard to explain, so I've put an image below.
Currently it's set up as a block that can change in height, depending on how many levels of text I tell it to fit to. Problem is, if I rescale my Multileader, I'll have to go back and rescale the block separately.
Now, possible to include such a feature in a Multileader such that it autoscales and auto lengthens, depending on the height of text?
C3D 2012 running with 64 bit Win7 all up to date on a capable Dell Precision
I want to add the leader part to the leader that is created when I drag a Station Offset label. This would be the part in a three point leader that goes horizontal for a short distance before the label text begins, similar to how a multi-leader is created. Looks weird having the C3D labels be the only "leadered" noted be without the landing.
Is there anyway to prevent AutoCAD from converting a MTEXT leader with a block element attached to a BLOCK leader when doing a copy/paste? See screen shot.
2012-04-05 3-09-00 PM.jpg
I've attached a PDF to my drawing and when I zoom in a bit it shows horizontal bars all over the PDF. The bars show up when printing as well. This is the first time it has ever happened to me.
My PDF Underlay contrast is set to 100, fade to 0, monochrome No, and Adjust colors for background Yes.
Can a expresion be use for text anchor point or Attachment?
I looking at using the ML or MR based on if the distance is Plus or Minus.
Any way to label a pipe part way between structures? I would like to be able to label a sanitary line where a service ties in with the main line invert.
C3D 2013
I've placed generic Junction box structures right out of the box from C3D and when I cut a section, the section shows the wrong side of the structure. (Rotated) i.e. An inserted 60”x36” junction box inserted as a curb inlet and then rotated into position will display the 60” side even though it’s perpendicular to the section line.
I've had to go back and place a 36”x60” to get it to display the 36” side in section? Why is there a “rotation handle” on the structure if you can’t really rotate it?I really don't want to swap all 60"x36" with 36"x60" structures just so they will display properly in section.
I'm currently working on a very large Dwg, with multiple pipe networks both sanitary, Storm and pressure pipe.
I need to create a .csv file for all my structures for Stakeout. I know I can go into my toolbox and create a report through the reports manager. The problem is that its giving me too much information, all I want is PNEZD. How can I create this report or edit that report being generated?
I am labeling structures in a network on the profile view. I cannot get the leader when i drag the label to anchor to the top of the structure? Is there a way to do this, i figured out how to have the label insert at the middle of the top line of the structure.
Civil 2014-Infrastructure Design Suite
Windows 7 Professional-SP 1-64 bit system
Intel Core i5-2500K cpu @ 3.3ghz
NVIDIA GeForce GT 430
8.0 gb ram
Seems to happen randomply, but my structures and labels disappear when synchronizing.
View 7 Replies View RelatedI have set the migration defaults to my part list and the pipes come in as expected but all the structures come in as null? I even went as far as setting every option to my rect junction NF and they still come in as null?
View 2 Replies View RelatedI have added a pipe network to my profile view and for some reason the structures do not extend down to the inverts of the pipe. So the pipes are lower than the structures. I tried changing the sump, and the rim to sump (rim to sump can be editted but immediately goes back to what it originally was when you click apply. I've also tried clicking the structure and extending it downwards but it doesn't change. I've tried changing the stye and still have the same issue.
View 4 Replies View Relatedin situation i can draw only a structure only. When i want to draw a pipe-there nothing happens. Is possibly that i erase something in Part builder command?
View 2 Replies View Relatedwhy I can't label certain pipes/structures? I can select the pipe or structure, rt click, add label and I get nothing. The layer is on cause I can see other labels. I also get the same result when I go to annotation, pipe label. This only happenes to certain pipes or structure, others in the same network label fine.
View 9 Replies View RelatedMy storm drain profiles will not plot the structures if I publish. They plot ok if I use the plot command, but I'd like to be able to publish.
View 4 Replies View RelatedAny way to easily identify what labels structures use? I have a plan and profile drawing drawing with 15 diferent layouts. Another guy worked on it and edited the contents on one of the profile structure labels. So now I'm going to have to go through each layout and looking for what structure labels would have been changed. Typicaly if there is a slight difference in the callout for one structure I'll just edit the label text for that one particular structure.
I would like to select (sweep) all the structures in profile and see which ones would have used this particular label style.
Is there a way to show the deflection angle between incoming and outgoing pipes in a structure label? Or any label at all, for that matter? I know it can be done with alignments at the PI point, but only in the source drawing.
View 1 Replies View RelatedIn a run of pipes and structures, I have 3 structures that overflow. 2 of the structures max hgl els are even with the rim elevation (as is in the case of other runs in the same project), and 1 structure has the max hgl exceeding the elev of the rim. Why this one and not the others?
View 2 Replies View RelatedI'm trying draw profile, I see "compile error can't find project or library",
then I select "convert VBA pipe and structure rules to .NET" it works until I turn off civil 3d
how to do, that it works for everytimes?
I am attempting to customize a Pipes and Structures report but am having difficulty changing the % slope column to run over rise.
View 2 Replies View RelatedI can change it under structure properties, but I can't find where to change it before I make the pipe network , 2013 Civil 3D.
View 2 Replies View RelatedCan you set pipe structures and assign your own rim elevation? I don't want to use surface elevation.
View 1 Replies View RelatedIs there any way to associate multiple pipe structures to one alignment. I spend half my time re-associating structures to alignments.
View 1 Replies View Relatedis there a quick way to create & export points from a pipe network? i've probably got 100 or so structures that need points with the correct structure name in the point description.
Dell Studio XPS 9100
Intel Core i7 CPU 930 @ 2.8GHz
12GB Ram
64 bit
C3D 2012 SP3.0
I have set the migration defaults to my part list and the pipes come in as expected but all the structures come in as null? I even went as far as setting every option to my rect junction NF and they still come in as null? What did I miss?
Civil 3D 2012 & 2013
HP Z210 Workstation
Intel Xeon CPU E31240 @ 3.30 Hz
12 GB Ram
64 Bit Win7 OS
I am struggling to import .stm file into a blank civil3d file. it does import whith correct sizes and elevation. the issue is rim level of structures are the same as SSA file but it will make 2 meter sump depth to stuctures, thus structures invert levels are not correct. i just made a sump depth rule for structure and applied to some of them. it will correct it but as i have more than 1000 manholes in network it will be a major job to apply the rule. i know "apply rule" command will work a lot but i would like to know why it is importing whit wrong properties?
View 3 Replies View Related