I've attached a PDF to my drawing and when I zoom in a bit it shows horizontal bars all over the PDF. The bars show up when printing as well. This is the first time it has ever happened to me.
My PDF Underlay contrast is set to 100, fade to 0, monochrome No, and Adjust colors for background Yes.
Please see attachment. There are two structure label styles in the attachment. The one on the bottom has the leader attached to the edge of the structure and the one on the top has the leader attached to the centre of the structure. How do I change the attachment point for the top label so the leader attaches to the edge of the structure as the bottom label does? Can't seem to find the parameter to change??
View 3 Replies View RelatedI would like the arrowhead for the leader labaling my structure in a pipe network to attach to the outside edge of the structure. Right now it attaches to the middle of the structure and is covered by the block representing my structure.
View 9 Replies View RelatedI would like the Leader Attachment for a structure in dragged state to be at the bottom of the top line. I have underlined the top line and would like the leader to extend from the underline.
Is there a way to add a "bottom of the top line" to the pull down menu, or control the leader attachment point in another way?
Where do you find the Leader Attachment Option in the Marker Style. I've looked but don't see it.
Civil 3D 2011
Can a expresion be use for text anchor point or Attachment?
I looking at using the ML or MR based on if the distance is Plus or Minus.
I was wondering about how to use annotation attachment.
I am not getting how the option is used.
I am trying to attach some attachment to leader but it causes some saving in temp location (deeper in temp location) instead of creating the association to the leader.
Is there a way to attach any animated file in the drawing such that the attached image remains animated in the Drawing file also (for example animated GIF images)?
View 1 Replies View RelatedWe have this problem at the moment with an Microsoft excel file that appears to have become stuck in the External references list, Ref C1-01-06. We would like to remove it if possible as it is now superseded (we can't change the file name unfortunately. What do we do if we can't reload, detach or bind? Its not referenced into anything else that is attached to the file, it is a direct attachment of the file that we are in.
View 3 Replies View RelatedWhen I create a parts list in an IDW for an assembly, I place it above our title block. The list seems to "snap" into place. Unfortunately, when a part is added to the assembly, the table expands into the title block. I want to keep the parts list headings at the top of table. Is there any way to make the table grow upwards, instead of down into the title block?
View 4 Replies View RelatedJust a quick (but possibly hard?) question. I have a multileader set up, but I also want it to automatically include a line which spans the vertical breadth of the text at the end of the landing. It's hard to explain, so I've put an image below.
Currently it's set up as a block that can change in height, depending on how many levels of text I tell it to fit to. Problem is, if I rescale my Multileader, I'll have to go back and rescale the block separately.
Now, possible to include such a feature in a Multileader such that it autoscales and auto lengthens, depending on the height of text?
When plotting to DWF my Civil Objects don't plot.
AutoCAD Civil 3D 2014
HP Z620 Workstation 64-bit
Duel Intel Xeon E5-2620 @ 2.00 GHz
Ram: 48 GB
I am being requested that I add a plunger/ anchor to the datum identifier within/ on a GD&T feature control frame (see attached). This is per ASME Y14.5M - 1994 and Autodesk IV states that it meets this spec. I also checked with a couple of 'reliable sources' and they also stated that it needs to be there. I was hoping that it was a personnel preference/ company standard type thing.
How to change the setting to add it within the control frame generator?
2012- all patches & SP's
Looking for registry keys to control the default attachment type (Full, Relative, & No Path) for XRef, Image, PDF, & DWF in the attachment dialog. (I'm using C3D but this applies to plain ACad also).
For XRef the key is:
HKEY_CURRENT_USERSoftwareAutodeskAutoCADR18.2ACAD-A000:409ProfilesMyWorkSpaceDialogsXattachDialog
The value is "PathType" DWORD = 1 for relativepath
For Image the key is:
HKEY_CURRENT_USERSoftwareAutodeskAutoCADR18.2ACAD-A000:409ISM
The value is "ImagePathType" DWORD = 1 for relative path (NOTE: this value didn't exist, once I created it, C3D used the key for both storing the value when closing C3D the reading the value when presenting the attach dialog).
Looking for keys that control PDF & DWF attachments.
I cannot seem to open .dwg files from an email using AutoCAD LT 2010
I get an error saying c:users"username" empoutlookj0814-052.dwg is currently in use or is read only.
Would you like to open the file ready-only?
I can save the file then open it. But the user wants to open the attachment straight from the email.
I've tried changing the attributes on the folder from read only but this doesn't work, tried another profile, again this doesn't work.
It does seem to only effect .dwg files when opening with AutoCAD LT 2010. If someone sends an xls, .doc, .pdf attachment they all open OK, I'm sure this is an AutoCAD LT 2010 issue. I have downloaded and installed both hotfixes / patches from the autodesk website and reinstalled the software but this hasn't worked either.
I never used 360 sor put these project file in the cloud whay would I get this notification?
HP Z210 Workstation
Intel Xeon CPU E31240 @ 3.30 Hz
12 GB Ram
64 Bit Win7 OS
I have lost the ability to create a pipe network in a single drawing. Sorta. I can create a pipe network, and label it, and see it in my toolspace, but it won't display it for any style in any format. I can bring in a data reference and label those, but can not see pipe or structure outlines or anything to that end. I have tried to recover, audit, purge. I am at the end, currently creating the pipe network, data referencing it in, and then just drawing lines between the labels.
View 9 Replies View RelatedIm working with 2013 Civil 3D. I have a site with polyline contours that have assigned elevations. I created my surface from the contours but when i try to label them with elevations, nothing. I label them by contour-mulitple with interval. All that is inserted are tic marks at the designated interval.
View 8 Replies View RelatedHow do you suppress viewing drawing polylines in the cross section editor in 2014. I never had this problem in 2013, now it shows all of my polylines in the cross section editor. I thought it would be under 'display objects'.
View 4 Replies View RelatedWe recently received a LiDAR data in the form of an .asc file. Brought it fine into Civil 3d.
However, the level data is in mm so levels are showing as 98450 instead of 98.45. The level ranges from 98450 to 166260.
When I create a surface and set the style to show contours, it only displays contour lines below 100,000. Is this a limit in Civil 3D or am I missing some setting somewhere? I'm using the UKIE template btw.
I have created a corridor of an exit ramp. Part way through the corridor, the left side slope isn't generated.
The subgrade doesn't exist. In the Sideslope to no side slope.png image that the corridor has a side slope and ditch at 10+600. Also in the 10+600.png image. But at 10+610 there is no side slope. There is OG surface out far enough, but it seems that in the 10+610.png image that there isn't enough OG surface. Orignally there was survey data missing in this area and it was added after the fact to the OG surface. Why doesn't the corridor recognize it, if that is the case. I have updated and syncronized the heck out of everything, but it still doesn't seem to work.
I should point out that this is in meters (the cross sections are 10m apart) and that it is the same Assembly being used for this area. Also all targets are consistant through this area as well.
Whenever I try to use the "DWG to PDF.pc3" driver, I'm getting TIN triangles in my PDF. They don't show up in the "Print Preview", just in the resulting PDF. They also don't show up if I print directly to a printer. Only in the PDF. Never saw this before installing SP2.1.
View 9 Replies View RelatedI have x'ref a dwg. file in my current drawing. And when i print preview with the correct ctb style... The x'ref lines are not showing up?
I am having troubles showing the green, cyan and yellow color. when i print preview it doesnt show nothing. The true color is on RGB.
it does not showing command window in civil in 3D 2011 after installing first time.How can i get it?
View 5 Replies View RelatedHow do i get templates which I have created, to show on the sections, when the sample lines were not drawn perpendicular to the alignment.
I am getting the template to show only at those sections which are perpendicular to the alignment.
I can’t seem to manage to get the profile working, the assembly seems to look ok but it doesn’t show on the profile!
The assembly just follows the line of existing ground and does not show the height of the assembly (barrier). Also, if you take a quick section through the alignment/corridor it shows the assembly but doesn’t show it fully?
I created a simple sub-assembly for a windfarm project but when I bring it into civils none of the links or points show up!
View 3 Replies View RelatedI have the profile of my pressure network and storm crossings converted into ellipses but I can't get my surface to show on the profile to show the amount of cover I have between the existing ground and top of pipe.
View 1 Replies View RelatedWhen I attempt to load xref the dialogue for file attachment does not appear. This has only started happening the past day or so. The same applies to image files etc.
View 2 Replies View RelatedI'm currently making a profile view where i want my features/objects to be shown in the bands for chain age elevation etc.
I have fences footpaths & vegetation lines that i can show in my profile view by 'projecting objects to profile view', but i was wondering if I could show these in the bands instead as it would be more convenient.
From what i can see in my bands I can label at Major Stations, Minor Stations, Horizontal Geometry Point, Vertical Geometry Point, Station Equation & Incremental Distance.
I've attached a picture showing what it currently looks like.
[URL]...........
I would like to show a north arrow on my drawing, but i dont know where north is,
Does autocad know where it is, my site is in a very remote mountaineous area with nothing to reference off on goole earth or maps.