How do i get templates which I have created, to show on the sections, when the sample lines were not drawn perpendicular to the alignment.
I am getting the template to show only at those sections which are perpendicular to the alignment.
I have everything needed for plotting of cross sections. Alignment, profile, assembly.
The "Corridor Section Editor" shows everything as it should be. Existing Ground, Final Grade, Labeling, etc. When "Create Multiple Views" or "Create Section View" only existing Ground shows. All layers are on.
I have a corridor with two baselines, one on the south side of the road, and one on the north side. The south baseline appears correctly in the section view. It is an asphalt bike trail with a ditch to the left side. The north baseline was not appearing at all. The assembly was just a ditch with nothing else. I changed the north baseline to use the same assembly as the south to troubleshoot. The pavement comes in, but the ditch still does not appear.
I can see the ditch feature lines on my corridor (see attached), but they are not appearing in the section view.
i am designing a footpath. I have got my corridor and assemblies all right. but when i plot the cross section, the pavement thickness and hatch pattern is not showing.
View 4 Replies View RelatedI have created several different corridors (with different assemblies in them), but when I to to view sections the same assembly keeps showing up. How do the sections get updated with the new assemblies?
View 4 Replies View RelatedI am facing the following problem:
I’ve got a 3D model with some blocks inserted. These blocks won’t show up in 2D or 3D sections or elevations.
When I leave only the blocks on and freeze the rest of the drawing, no section is created at all (“There are no solids or surfaces that can be projected”).
None of the geometry is on the Defpoint layer. The objects are printed and DO show up in the live section preview.
was setting up my printing sheets when i noticed my south and west elevations are showing up as sections. how to change back to elevation views.
View 3 Replies View RelatedI just upgraded to Photoshop CC and when I load my templates, I cannot see the layers which contain the photos, only the text and graphics. I have a lot of templates and use clipping masks all the time in my old version and I don't want to have to make new templates.
View 6 Replies View RelatedI am trying to work on a previous file in my office, and when it opens on mycomputer, it does not display as it should.
In general, the purpose of the project is to reinstate the side slopes of a road abutting a river. Cut & fill sections have been generated on 20m station increments along the road corridor/surfaces in order to calulate cut and fill as well as to reference the design to flood levels.
When I open the file, all of these sections (and there are alot) have relocated themselves to various locations in model space, none of which are aligned with the viewports that are being used for printing.
Could it be software and/or hardware incompatibility with the computer they were originally created on? (I believe it was created with C3D 2010, or C3D 2011 - I am currently running 2012)
we have just upgraded from Inv 2011 to 2013. I am trying to create the drawing templates in 2013 by using the blank 2013 template and then copying our border from 2011 onto it. This works a treat apart from 1 thing.
The i properties do not get copied over as well so the sheet is blank from drawing number, title and the custom properties etc.
Can you create point groups in your template to be used by all drawings or do they have to be per dwg.?
View 7 Replies View RelatedI have sevreal corridors with various spurs. The contractor wants the cut/fill volume in sections along the corridors, not one big cut/fill calc. Is there a way to do this in C3D? I have got the volume table with the chainages on, but he does not want a cumulitive figure for the whole corridor.
View 1 Replies View RelatedWe have created sections from our corridor. We see FG and EG, we can use bands for EG from surface. How do we get the FG band to show the elevations for FG? The only option we have is the EG surface. We have tried to create a surface form the corridor in the corridor properties but that surface still doesn't show up in the surface list in the bands. I would have thought this info would be dynamic and come directly from the corridor would it not?
View 3 Replies View RelatedI am working on a project for a park in which they are looking for a new access road and a parking lot. I created the road and sections for it, now im looking to get material cut/fill from the sections. I am having a tough time getting them to work. The only thing I can get to work is if i created a volume surface comparing my eg to my fg surface. That will give me a cut and fill material amount for my new road
What i am trying to get is the volume report for each sections, so i can get the cut/fill for each section. I have followed the tutorials and tried everything, but nothing seems to work. I created a surface from my corridor, and for some reason when i go to edit my materials, i cant add my proposed surface from my corridor to make the comparison from, and i think thats my problem. Everytime i go to create my volume report, i get all 0's.
When editing the Cross Section Styles the Horizontal Axis changes do not take affect. Vertical will work as entered.
See attached image.
I am changing under the Horizontal Axes tab, on the Section View Styles Menu.
Every now and then I open a model and the sections/profiles all solid white 'hatch' within the bands.
I have closed down and regenerated in the hope it has something to do with re-freshing the model, but no luck.
I am trying to set up portrait cross sections. I can get my views to create a grid and such that look correct, however when putting them on sheets, it rotate the border, but also the modelspace. Are there certain settings in the sheet creation or the dwt file I need to review to do portrait sections?
Civil 3D 2012 SP4.0 Windows 7 Enterprise 64-bit
C3D 2014 SP1
Dell M6600, Core i7 @ 2.3GHz, 16 GB ram
Dell T3500 workstation, too much ram to post
I have R/W and Utility lines that I am trying to display in my cross-sections. I add them as Profile Grade Points to the Sample Lines. This works well in 4 out of 5 of my corridor drawings, however, 1 of the files does not display these lines in the cross-sections. I already checked turned-off layers and that's not it. When I check the individual Section View Properties, these alignments (& corresponding profiles) show up in the list, just not on the actual cross-section.
View 8 Replies View Relatedhow do I convert a section that I created using an alignment and surface into a polyline. I want to be able to manipulate and easily use the section for another program.
View 1 Replies View RelatedI have created a drawing called xsec. I xrefed the corridor drawing into it and data shortcut the alignments in as well. I created sample lines and cut my cross sections in the drawing. Everything at this point looks fine.
The problem happens when I create a new drawing and xref the xsec into it. In this new drawing only the right side of my cross sections is showing up. I want to use this drawing for my sheet set rather than have a bunch of tabs in the xsec drawing.
had my cross sections ready to go all day, had to add points to my surface layer is all i did, now when i cut the sections they are all laying on top of one another.
View 6 Replies View RelatedI am using C3D 2012 and the feature "Project Objects into Multi. Section Views". The question I have is when I project a 3D tree block into the section it appears in the x-section in plan view only. How can I get the tree block to appear in the section in elevation view.
View 3 Replies View RelatedI am trying to produce some longsections from a DWG Format Drawing i downloaded from a mapping website (promap) at the moment im going through the process of using a 3d polyline, snapping it to every contour i need, then viewing it from the side and drawing a longsection table around it (Pretty amatuer im sure) How is it possible to produce a longsection automatically using Civil 3D/AutoCAD (The contour map is made up of 3D Poly lines).
View 1 Replies View RelatedI can show calculated volume in my sections if I use methods as "Primordial" or "Average End Area" but not "Composite Volume".
View 6 Replies View RelatedI am an IT specialist running AutoCAD Civil 3D on about 100 computers for students at a community college.
The students recently alerted me that the Plan Production templates are missing from their accounts. I have previously watched these templates build, and they are supposed to be installed for each user the first time they run Civil 3D. (I have actually seen these files get added to the enu directory as the green bar progresses.)
At one time, these templates loaded, but now they are not. I am seeing two other folders in this directory, as wel as several other templates in the enu root directory, but not the Plan Production folder.
Civil 3D is part of a suite of CAD apps I installed on our systems that includes base AutoCAD 2013, AutoCAD Architecture, AutoCAD Electrical, AutoCAD MEP, AutoCAD Inventor, AutoCAD Mechanical, AutoCAD MAP, and AutoCAD REVIT.
Also, I have installed Civil 3D SP2 directly over the base installation without first installing SP1.
Finally, some users have told me that we should run base AutoCAD once and let that progrm make the first-time-use changes before running Civil 3D for the first time. I have tried running base AutoCAD first and Civil 3D first, and neither seems to make any difference.
I have created a drawing template in C3D with layers, blocks, descriptor keys and all the fun stuff, but this was just for the survey section of the engineering group I work with. Now the engineers, who had another template set up with design layers which they don't use but may want to use, asked me if I can add their layers to my template. The have about 2000 layers and I do not want to manually add this information. Is there any way I can either export their layers or merge the layers?
View 3 Replies View RelatedI'm looking to get a "template" or example with layers and plot styles for erosion control plans.
I have recently started with a new company and I'm one of the few that use AutoCAD. I have been unable to locate a good plot style or layers for any type of detailed plans. I know how to create plot styles, but I didn't know if there was a place to find "templates" or a drawing to copy the layers and a plot style.
I am creating a template for my company with associated description keysets. The codes and attributes have already been created in an excel spreadsheet. Currently I am typing these all individually by hand but would like to import the excel data if possible.
View 2 Replies View RelatedI have several hundred cross sections for a surface that I need to label the major section breaks. Civil 3D gives the option of weeding based on distance, but I want to label only the major grade breaks (i.e. more than 1%). Is this possible, or is the only option manually labeling the section?
View 2 Replies View RelatedI've created sections and set up Materials List with Shapes Defined (Edit Material List.jpg) but the View Group Properties do not reflect this and have to be edited to suit.
IDSP Premium 2014 (mainly Civil 3D 2014 UKIE SP1 & Infraworks with some limited 3ds Max Design)
Win 7 Pro x64, 256Gb SSD, 300Gb 15,000 rpm HDD
16Gb Ram Intel Xeon CPU E5-1607 0 @ 3.00GHz (4 CPUs), ~3.0GHz
NVIDIA Quadro 4000, Dual 27" Monitor, Dell T3600
I sampled my sections at 25 feet intervals, created my section view group and them plotted my cross section sheets. All look fine.My problem is that I need to include Station 21+17.40 and some other similar stations (in-between the 25 feet intervals) into my cross section sheets without deleting the existing Sample Line Group and Section View Group. Is there a way I can sample my desired additional sections and add them to the existing Sample Line Group and Section View Group and re-plotted my cross sections?
View 1 Replies View Related