we have just upgraded from Inv 2011 to 2013. I am trying to create the drawing templates in 2013 by using the blank 2013 template and then copying our border from 2011 onto it. This works a treat apart from 1 thing.
The i properties do not get copied over as well so the sheet is blank from drawing number, title and the custom properties etc.
Have more than one drawing template? (we use A and B size sheets)
My questions concerns, metric vs imperial A vs B vs C etc etc drawing sheet size title block does not scale down accordingly when change sheet size within an existing drawing template.
Is it possible to have one drawing template that can be toggle imperial vs metric, and then sheet size selected and then the title block scaled down or up accordingly? (I would assume this could be done using iLogic)
Or is it normal to have different drawing templates for sizes and units?
I want to change the Arrow Side Position for Weld Symbols from Top to Bottom for all future drawings. I have opened the Drawing Template (Standard.idw) and opened the Styles Editor and switched the Arrow Side Position and saved the template. Then I have tested. In the template it works good, but when I open a new drawing (based on the template) the arrow side position didn't change.
View 4 Replies View RelatedI have found that if I use the drop-down to select a new part file, it does not use the default (and only) part template in my templates folder. I know this as there are several settings that do not match. If I click on the icon to open the new part dialog, it displays my templates (part, assy & drw) and creates the new file based on those accordingly.
Any setting that needs to be changed to correct this behavior?
When I try to open an X5 template in X6, nothing happens in X6. I don't receive any error messages. It looks like the template is opening, but I just end up with a blank grey (no file opened) slate. I am using the 32-bit build. Everything else seems fine.
View 1 Replies View RelatedI'm going to take the computer home tonight so that I can set up as many drawing templates that I will conceivable need at work.
Are there any special ways to go about this or CAD standards that I should observe?
I mostly use A3 and A4 paper for architectural metric drawings.
Is it worth making me own templates so that I can just jump into future drawings or is it better to download templates from the internet?
I have created a drawing template in C3D with layers, blocks, descriptor keys and all the fun stuff, but this was just for the survey section of the engineering group I work with. Now the engineers, who had another template set up with design layers which they don't use but may want to use, asked me if I can add their layers to my template. The have about 2000 layers and I do not want to manually add this information. Is there any way I can either export their layers or merge the layers?
View 3 Replies View Relatedi am trying to set up templates at a new job and i want to create templates with an xref for the title block so when we start a new drawing, we use the template, save to the project file and everything is there with our title block already xref'd. my problem is, the path on the xref'd title block stays the same and is still referencing the location of the file i used when creating the template. if possible, when i save the new drawing to the project foldeer i want the xref to also move to the project file and the path to the xref to change.
View 4 Replies View RelatedHow to create Autocad templates from an external application?
The idea is to create a template with datafields, which can be filled later with actual data when
I've a batch of videos that I'd like to edit and subsequently upload.
It is possible to create a sort of project template that has the same title screens, transitions, and a final end credits? What I've been doing to date is just copying the last project and changing the data manually.
I am new to PaintDotNet, and NOT a graphics designer, so I am struggling through the "12 Tutorials in a PDF" as well as the Kindle book "Mastering PaintDotNet", but I have a problem at the moment. What I need to do is to create a template, a Wordpress Header, which has a circular cutout through which the client's logo can be seen.
Attached is a sample of the type of thing I mean, this one has square cutouts, but I need to create a circular cutout. I am aware that I can do it by creating a transparent layer, then drawing a circle and manually erasing the contents of the circle, but that is time-consuming and not very professional looking unless I zoom in to 1000% and use a small width eraser, which would take forever.
I've opened up Inventor 2013 and clicked 'new' but no templates have come up. I went to my templates file in my documents and there wasn't any there. Where can I get the templates?
View 6 Replies View RelatedWe are about to migrate from IV 2011 to IV 2012 so it is time for the annual template update. We also use and store our templates and style library in Vault.
Currently we have two idw templates, one for b-sized paper and one for d-sized. We are finding that this does not give enough flexibility when detailing components from 60' weldments down to 1/2" dia machined shafts.
Are we better off to create/ manage a new idw template for each of our large and small weldments, assembly prints, flame cut components, and machined parts. Or should we use a single template idw file and add Sheet Formats, Borders, Title Blocks, Sketched Symbols, Dimension Styles as required to better standardize the final idws?
I have a situation where I need to place a curved door in a curved wall, I do not want to model in place or look for a work around but would like to create a family template that that could be used frequently.
In previous versions I was able to copy the metric door.rft and rename it to i.e. Metric Door_Radial Host.rfa. I would then be able to edit this template to suit my requirements, save and rename to .rft. This template would then be live.
In 2013 it seems that I cannot open a .rfa file for editing.
How many people recreate their templates from scratch when you upgrade to then next version of Inventor? When we switched to Inventor we were told that we should recreate our templates from scratch when going to the next release. This wasn't to bad in the beginning but is very time consuming now due to the number and complexity of our templates. I'm curious what other people are doing. I would also like to hear from Autodesk, what do you recommend?
View 4 Replies View RelatedWe have a minor issue with STEP translations. We keep our templates on the network, and they have a lot of customized settings. Everything is fine until we try to translate a STEP file, then Inventor wants to use the templates on the "C" drive (the ones that came with the software).
Is there a setting I can use to make Inventor use the templates on the network? I've got my "Files" setting in the "Options" pointing to the templates on the network, but Inventor still uses the ones on the "C" drive.
I am working on a project that involves a screw conveyer(auger) with a 3" od, 1.5"/flight and a 0.800" ctr shaft. I modeled it without any difficulty using the "helix" function in a 3-d sketch & then swept a rectal around that path. The problem is, I need paper templates to layout the pattern on the steel. In the past I have made use of the "flat pattern" feature to print paper templates for tube notching and such, but that function prompts me with an error message "no surface to flatten" Attached is the full screw(augShaft9in.ipt), a single flight and 2/3 of a flight(i dont think a full flight will flatten & not overlap). Need to getting these patterns printed.
View 1 Replies View RelatedI want to delete unnecessary templates. I use metric ones, and there are two metric assembly templates. What are, in general, the differences between assembly templates?
There are many style differences between drawing templates, but for part and assembly?
A workflow that works great for me is to create parts (Make Part command) from a multibody solid. The dialog window presents one with an option to choose other Templates (I have a few), BUT I have to choose the template I want to use EACH time I create a part. That is, Inventor doesn't automatically remember the last Template I chose, it defaults to the Standard.ipt or Standard.iam.
Is it possible to set it so that Inventor remembers what Template I chose the last time so that I don't have to choose it every time I Make Part?
I have changed my settings in all of my templates to metric. I create a new assembly, add the part (yes, it is set to metric), I now create my first new part in the assembly. When I start to sketch it changes back to inch. How do I set it so it stays metric? This is Autodesk Inventor Professional 2012.
View 6 Replies View RelatedI've lost my Bolted Connection Templates... you know, the pre-defined bolt-washer-nut selections available for re-use at the bottom of the Bolted Connection dialoge box.
Did I lose or over-write a file? What file do my Bolted Connection Templates live in?
I'm customizing templates inventor.I need to know how to customize the template using DA for the design of the shafts.
View 1 Replies View RelatedI am trying to build a set of scripts (aka iLogic rules) into templates. So far, quite a common task. One extra requirement is that the scripts need to be updatable after parts have been instanciated from the template. That is, we do not want to update all of the ipt each time a new material option is added to the script. That means that external rules are the only way to go, right? This is the road I tried and it seems to work on my machine.
One extra requirement is that the whole project must be shared between several workstations. We went the Subversion road for that (for all the Vault comments). The scripts are distributed properly and in the same absolute location on the two test machines, all good (I checked the md5 on both side and they all match). The application options on all the machines are all set the same way (export the xml file, check it in the source control, import on all the machines restart). The iLogic search path is also updated, but manually this time, since it is not included in the application options export. It should all work perfectly right? Well, sort of....
I did create a tiny assembly from the templates. On my source machine, all looks good. The ilogic rules are both listed in the ilogic browser and the triggers are set when I instanciate from the template. This is the intended behavior. Now, I close inventor, copy the whole directory to a new machine, open inventor there and open the project. The rules do not appear anymore in the browser, but they are still listed in the trigger list (wtf?). The best part is that if I do not touch anything, stuff still works! The scripts are found and run properly!! Now, if I have to change the triggers or even find the rule in the browser to run it manually, well, bad-stuff-happens (tm).
All the files in question are indentical on both machines, the ilogic files, the ipt files, the application options export, all with the same hash. The ilogic search path is also set the same as are the absolute paths. It should work the same (tm).
Me sending a copy of the files is not likely to work though. Since the problem happens when you copy. I could try to "pack and go", but that would break reason #1 for doing that, which is keeping only one version of the script and adding materials at only one place for all the projects.
I'm having problem changing the default location for templates in Application Options of Inventor 2013. If I set the location to a folder in my server, the template files aren't showing up. It's like there's nothing there. I've never found this problem before. The templates are shared on the network, so it's the same for everybody. Now it's necessary to everyone copy them locally, which is not the best practice in my opinion.
View 9 Replies View RelatedI have recently changed computers, I am apart of a Flexi license system. Now my problem is when i go into Application options and change where to open my templates from it does not save when i quit Inventor. I have also notcied small things like the reverse cusor button i always click but everytime i get out of Inventor it defaults.
(Pictures: One is the custom templates i would like to use. I am selecting them in Application Options/ Templates than applying and closing. Then when i am fnished with Inventor for the day and shut down and the next day when i come back it defaults back to the default templates)
How to change the Default Templates Location from the installation directory to the Network Location so that my Mechanical Design Team can use our Assigned Templates.
View 1 Replies View RelatedI need templates with different Part List settings in the same project. The Part List is set either for frame construction or for regular assembly.
I cannot use them both in templates due to Style conflict and should alter the Part List table manually. Is it possible to bypass this somehow?
I have a .png file that I want to place in a template. This png file is text with a transparent background. When I place this in my template, the background is shown in white. The sheet color the idw is beige, so this doesn't look very good.
Also, when I save a copy of the idw as .dwg, the white background is shown there as well. when it prints, it is ok. If there was a way to have it stay transparent in both?
Why do I have to select edit hole note each time I use the hole feature tool? It will not keep my settings to show qty.
It seems that I should be able to save it to my library and make it the default. I have saved library,templates all with zero luck.
See 2 screen shots in the attachment.
I have 45 PCs running Autodesk Inventor 2011 in a student PC lab. We have since set up Vault Server and I need to change the location that these point at.The files that I need to edit can be got to by:
1. Open Autodesk Inventor
2. Click “Pro”
3. Click “Options”
4. Click the “File” tab
5. I need to edit the following: Default templates, Design Data (Styles, etc) and Default Content Centre files.
6. The above three will be pointed to a server that has vault setup on it (\vault emplates, etc).
Now to clarify, Inventor works, I do not need assistance activating it, and I do not need assistance with group policy to set up the install..I need to be able to modify the above with group policy through either the registry (if possible) or some other method.
I am having problems Xref ing a drawing of my new title block to paperspace. The plan is to try and have it as the default title block whenever I select to layout a drawing
View 5 Replies View Related
